start stop button FORD FUSION (AMERICAS) 2016 2.G Quick Reference Guide

INSTRUMENT PANEL
Low Fuel Light
A reminder light triggers when the fuel level is low or the fuel tank is nearly empty. Refuel as soon as possible.
Left Vehicle Information Display
Provides information about various systems on your
vehicle. Use the left-hand, 5-way controls located on
the steering wheel to choose and confirm settings and messages. Refer to the Information Displays chapter in your Owner’s Manual for more information.

Adaptive Cruise Control*
Adjusts your speed to maintain a proper distance between
you and the vehicle in front of you in the same lane.
You can set the gap distance between yourself and the vehicle in front by pressing the
and the buttons on
the steering wheel. Refer to the Cruise Control chapter of your Owner’s Manual for more information.
NOTE Driving aids do not replace the need to watch
where the vehicle is moving and brake when necessary.
Refer to your Owner’s Manual for safety
information, more details and limitations.
Steering Wheel Controls
Audio Controls Press VOL + or – to increase or decrease volume levels.
Press to access the next or previous radio station
preset, CD track or preset satellite radio channel*.
Voice Controls *
Press to access voice recognition.
Press to access phone mode or to answer a call.
Press
to end a phone call.
Right Vehicle Information Display*
Displays information about Entertainment, Phone and
Navigation*. Use the right-hand, 5-way controls located on
your steering wheel to scroll through, highlight and make minor
adjustments within a selected menu. Refer to the MyFord Touch
®
chapter in your Owner’s Manual for more information.
Wiper Control
Adjust the lever to switch the wipers on and off. Rotate the dial to
adjust the intermittent wipe speed. Pull the lever toward you to
use the washer and spray the windshield.
Push Button Start*
Allows you to start your vehicle by pressing the START STOP
button while fully pressing down on the brake pedal. Press the
button again to switch the engine off. If your vehicle has been
idling for an extended period of time, it automatically shuts
down. Before the engine shuts down, a message appears in the
information display, allowing the driver to temporarily override the
shutdown feature.
NOTE Your intelligent access transmitter must be inside the
vehicle for the ignition to start. The keyless warning alert sounds
the horn twice when you exit the vehicle with the intelligent
access transmitter and your vehicle is in RUN, indicating that
the vehicle is still on.
Tilt/Telescope Steering Column
Pull the lever down to unlock the steering column. Adjust the
steering column to your desired position. Push the lever up to lock
the desired position into place.
*if equipped*if equipped5

Remote Start*
Remote start allows you to start the engine from outside your
vehicle using your remote transmitter. To start, press and then
press twice within three seconds. Once inside, apply the brake
while pressing the START STOP button. Shift into drive (D) and
go. If you have the integrated keyhead transmitter, insert the key
into the ignition and switch on the ignition as you normally would
before driving. To switch off the engine from outside the vehicle
after using your remote start, press
once.
Intelligent Access*
NOTE Your transmitter must be within three feet (one meter)
of the vehicle for intelligent access to function properly.
This system operates the power locks. To unlock the driver’s door,
pull the front exterior door handle. To lock the doors, press the
sensor on top of the door handles. To unlock and open the luggage
compartment, press the exterior release button hidden above the
license plate. The intelligent access transmitter also contains a
mechanical key blade to unlock the driver’s door, if necessary.
You must have a valid transmitter inside the vehicle to switch on
the ignition and start the engine. If you are unable to start your
vehicle using the push button start, do the following:
1. Place the transmitter in the backup slot inside the
center console with the buttons facing the rear of the vehicle.
2. With the key in this position, press the brake pedal, then
the START STOP button to switch on the ignition and start
your vehicle.
Auto-Start-Stop*
The system helps reduce fuel consumption by automatically
shutting off and restarting the engine while your vehicle is
stopped. The engine restarts automatically when you release
the brake pedal. A green Auto-Start-Stop indicator light within
the instrument cluster displays to indicate when the engine stop
occurs. The system automatically turns on every time you start
your vehicle.
To switch this feature off, press the Auto-Start-Stop button
, located on the center console, near the gearshift lever.
The button lights. Press the button again to restart. The system
automatically starts with every vehicle start.
Active Park Assist*
The active park assist system detects an available parallel parking
space and automatically steers your vehicle into the space (hands-
free) while you control the accelerator, gearshift and brakes. The
system visibly and audibly instructs you to park your vehicle. To
use, press the
button located on the center console, near the
gearshift lever. To stop the parking procedure, grab the steering
wheel or press the control again. For complete information, refer to
the Parking Aids chapter of your Owner’s Manual.

NOTE The driver is always responsible for controlling the vehicle,
supervising the system and intervening, if required.
CONVENIENCE
*if equipped
Front and Rear Parking Aids*
Sound an audible warning tone if there is an obstacle near the
vehicle’s front or rear bumpers. As the vehicle moves closer to the
obstacle, the rate of the warning tone increases in frequency. The
front sensors turn on automatically when the gearshift is in any
position other than park (P) and the vehicle speed is below
7 mph (12 km/h). The rear sensors detect certain objects while
the transmission is in reverse (R). See the Parking Aids chapter in
your Owner’s Manual for complete information on your vehicle’s
parking aids.
Lane Keeping System*
Notifies you to stay in your lane through the
steering system and the instrument cluster
display when the front camera detects an
unintentional drift out of your lane is likely
to occur. The system automatically detects
and tracks the road lane markings using a
camera mounted behind the interior rear
view mirror. Set your system settings as
desired by Mode and Intensity from your information display
screen. See the Information Displays chapter in your Owner’s
Manual for more details on how to change your settings.
Driver Alert*
Monitors your driving behavior using various inputs including
the front camera sensor. If the system detects that your driving
alertness level reduces below a certain threshold, then the system
sounds a tone and displays a message in the information display.
Press OK on the steering wheel to clear a warning, if required.
Pre-Collision Assist*
The system is designed to alert you of certain collision risks. The
system's sensor detects your vehicle's rapid approach to other
vehicles traveling in the same direction as your vehicle. When your
vehicle rapidly approaches another vehicle, a red warning light
flashes and a tone sounds.
The brake support system assists you in reducing the collision speed
by pre-charging the brakes. If the risk of a collision further increases
after the audio-visual warning, the brake support prepares the
brake system for rapid braking. The system does not automatically
activate the brakes, but if you press the brake pedal even lightly, the
brakes apply full stopping power. For complete information, refer to
the Driving Aids chapter of your Owner’s Manual.
NOTE Visibility aids do not replace the need to watch where
the vehicle is moving. Refer to your Owner’s Manual for safety
information, more details and system limitations.
SecuriCodeTM Keyless Entry Keypad*
Allows you to lock or unlock the doors, recall memory features and
arm or disarm the anti-theft alarm. The keypad, located near the
driver’s window, is invisible until touched and then it lights up so
you can see and touch the buttons. To get started, you need your
five-digit factory code found on your owner’s wallet card or you can
display it temporarily within the information display, if the card is not
handy. Entering this code unlocks the driver’s door. To lock all of the
doors, press and hold 7•8 and 9•0 at the same time. For complete
information, refer to the Locks chapter of your Owner’s Manual.
FUNCTION
*if equipped13