Scr FORD KUGA 2011 1.G Owner's Manual

Symbols Glossary
Symbols are used inside the graphics and in the
text area to enhance the information display.Movement Symbols
Movement symbols provide detailed information
to a required component movement. These
component movements can be rotational or 1-3
dimensional movements.
E88969
1
2
3
4
5
6
7
8
G955392en2008.50 Kuga8/2011
100-00-19
General Information
100-00- 19
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL

Description
Item
Minor component movement
clockwise/counterclockwise
1
Major component movement
clockwise/counterclockwise
2
Component movement to the
left/right/up/down
3
Component movement towards/away
4
3 dimensional component movement
5Description
Item
2 dimensional component movement
6
3 dimensional component rotation
7
3 dimensional component cycling
8
Turn Symbols
Turn symbols are used to provide further
information on the direction or angle of component
turns.
E88970
12
34
6
7
5
8
G955392en2008.50 Kuga8/2011
100-00- 20
General Information
100-00- 20
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL

Description
Item
Set the selector lever to the park (P)
position
1
Set the selector lever to the reverse ( R )
position
2
Set the selector lever to the neutral (N)
position
3
Set the selector lever to the drive (D)
position
4
Set the selector lever with manual shift
pattern to the park (D) position
5
Set the selector lever with manual shift
pattern to the manual (M) position
6Description
Item
Set the selector lever with manual shift
pattern to the shift down (-) position
7
Set the selector lever with manual shift
pattern to the shift up (+) position
8
Set the gearshift lever to the neutral (N)
position
9
Further gearshift lever positions that may
appear in illustrations
10
Screwdriver symbols
The screwdriver symbols are used to show which
screwdriver bit is recommended to carry out a
procedure step.
G955392en2008.50 Kuga8/2011
100-00-
24
General Information
100-00- 24
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL

Description
Item
Turn the component clockwise through
45°
1
Turn the component counterclockwise
through 45°
2
Turn the component clockwise through
90°
3
Turn the component counterclockwise
through 90°
4
Turn the component clockwise through
180°
5Description
Item
Turn the component counterclockwise
through 180°
6
Turn the component clockwise through 2
complete turns
7
Turn the component counterclockwise
through 2 complete turns
8
Steering Wheel Symbols
Steering wheel symbols are used to provide further
information to a required steering wheel position
or steering column lock status.
E123751
3
4
12
56
7
G955392en2008.50 Kuga8/2011
100-00-
21
General Information
100-00- 21
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL

E88973
1
3
4
5
2
Description
Item
Screwdriver
1
Cross bladed screwdriver
2
Flat bladed screwdriver
3Description
Item
Hexagonal screwdriver
4
TORX screwdriver
5
Pliers symbols
The pliers symbols are used to show which pliers
is recommended to carry out a procedure step.
G955392en2008.50 Kuga8/2011
100-00- 25
General Information
100-00- 25
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL

E88974
1
34
2
5
7
6
Description
Item
Combination pliers
1
Side cutter pliers
2Description
Item
Securing ring pliers - inner
3
Securing ring pliers - outer
4
G955392en2008.50 Kuga8/2011
100-00- 26
General Information
100-00- 26
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL

Description
Item
Hose clamp pliers
5
Locking pliers
6
Long nose pliers
7Drill symbols
The drill symbols are used to show which type and
size of drill bit is recommended to carry out a
procedure step.
123
45
E88975
M6M6
Description
Item
Drill bit with a specified diameter
1
Hole saw with a specified diameter
2
Stepped drill bit with a specified diameter
3
Tap with a specified diameter
4
Die with a specified diameter
5Description
Item
Scraper for circular holes
6
Scraper for straight edges
7
Cutting tool symbols
The cutting tool symbols are used to show which
type of cutting tool is recommended to carry out a
procedure step.
G955392en2008.50 Kuga8/2011
100-00- 27
General Information
100-00- 27
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL

E88976
123
456
7
5mm
5mm
1110
98
12
Description
Item
Cutting knife
1
Air body saw
2
Scissors
3
Grinder
4
Jig saw
5
Plasma cutter
6
Sanding Paper
7Description
Item
Drill through the shown number of body
panel layers with a specified diameter
8
Drill through the shown number of body
panel layers with a suitable diameter
9
Drill through 1 body panel layer with a
specified diameter
10
Drill through 1 body panel layer with a
suitable diameter
11
Wire brush
12
G955392en2008.50 Kuga8/2011
100-00- 28
General Information
100-00- 28
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL

Apply Chemical or load symbols
The apply chemical or load symbols are used toshow where to apply which type of chemical or
load to carry out a procedure step.
E88977
2
4
8
13
79
56
10mm
12
1314
10
18
G955392en2008.50 Kuga8/2011
100-00-
29
General Information
100-00- 29
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL

Description
Item
Apply the substance from the specified
tube
1
Apply the substance from the specified
cartridge
2
Apply the specified chemical with a brush
3
Apply the specified load to the specified
component
4
Apply a bead with a specific diameter from
the specified tube
5
Apply a bead with a specific diameter from
the specified cartridge
6
Apply the specified chemical with a roller
7
Apply hot glue to the specified component
8
Apply the specified amount of fluid from
the fluid can
9
Apply fluid from the fluid can
10
Clean the specified component with the
specified material
11Description
Item
Apply a broken bead from the specified
tube
12
Apply the specified chemical from a spray
can
13
Apply the specified lubricant to the
specified component
14
Apply spot welds to the specified
component
15
Apply a continuous weld to the specified
component
16
Handle the fluid using a syringe
17
Extract the specified amount of fluid using
a syringe
18
Measurement symbols
The measurement symbols are used to show
where to measure which type of measurement to
carry out a procedure step.
G955392en2008.50 Kuga8/2011
100-00-
30
General Information
100-00- 30
DESCRIPTION AND OPERATION
TO MODEL INDEX
BACK TO CHAPTER INDEX
FORD KUGA 2011.0MY WORKSHOP REPAIR MANUAL