clock FORD POLICE INTERCEPTOR UTILITY 2013 1.G User Guide

Replacing front parking lamp/turn signal bulbs without wig-wags
(Utility)
1. Rotate the bulb socket
counterclockwise and remove it from
the lamp assembly.
2. Pull the bulb straight out of the
socket.
Reverse steps to reinstall bulb(s).
Replacing sidemarker bulbs (Utility)
1. Rotate the bulb socket
counterclockwise and remove it from
the lamp assembly.
2. Pull the bulb straight out of the
socket.
Reverse steps to reinstall bulb(s).
Front parking lamp/turn signal flashers (wig-wags) (If equipped)
Your vehicle is equipped with an LED front parking lamp/turn signal
flashers (wig-wags). It is designed to last the life of the vehicle. If
replacement is required, it is recommended that you see your authorized
dealer.
Note:Use of the wig-wag feature overrides normal operation of the
park/turn indicator.
Spot lights (If equipped)
Your vehicle is equipped with a spot light attached to one or both of the
A-Pillars. It is designed to last the life of the vehicle. If replacement is
required, it is recommended that you see your authorized dealer.
Maintenance237
2013 Police(pol)
Owners Guide gf, 2nd Printing
USA(fus)

Replacing stop/tail/turn and sidemarker lamp bulbs (Sedan)
1. Make sure the headlamp switch is in the off position and open the
trunk.
2. Remove the press pin and cargo net
fastener (if equipped) and carefully pull
the carpet away to expose the backside
of the tail lamp assembly.
3. Remove the nut and washer
assemblies, then pull the lamp assembly
away from the vehicle.
A.Side marker lamp
B.Stop/tail/turn lamp
3. Remove the bulb socket by rotating it counterclockwise, then pulling it
out of the lamp assembly.
4. Pull the bulb straight from the socket.
Install new bulb(s) in reverse order.
238Maintenance
2013 Police(pol)
Owners Guide gf, 2nd Printing
USA(fus)

Replacing backup lamp bulbs (Sedan)
1. Make sure the headlamp switch is in the off position.
2. Remove the deck lid trim panel press pins
and carefully pull the panel away to expose
the backside of the backup lamp assembly.
3. Remove bulb socket by rotating it
counterclockwise, then pull it out of
the lamp assembly.
4. Pull the bulb straight from the
socket.
5. Install the new bulb in reverse order.
Replacing high-mount brake lamp bulbs (Sedan)
Your vehicle is equipped with an LED high-mount brake lamp. It is
designed to last the life of the vehicle. If replacement is required, it is
recommended that you see your authorized dealer.
Maintenance239
2013 Police(pol)
Owners Guide gf, 2nd Printing
USA(fus)

5. Remove the bulb socket from the
lamp assembly by turning it
counterclockwise.
6. Pull bulb straight out of socket.
7. Install the new bulb in reverse order.
Carefully install the tail lamp assembly on the vehicle by securing the
lamp assembly with two bolts. Reinstall bolt covers.
Replacing tail/brake lamp bulbs (Utility)
For bulb replacement, see your authorized dealer.
Replacing high-mount brake lamp bulb (Utility)
Your vehicle is equipped with an LED center high-mount stop lamp
located in the spoiler. It is designed to last the life of the vehicle. If
replacement is required, see your authorized dealer.
Replacing license plate lamp bulb (Utility)
1. Carefully release the spring clip
(1).
2. Remove the lamp (2).
3. Remove the bulb (3).
Reverse steps to reinstall bulb.
3
2
1
Maintenance241
2013 Police(pol)
Owners Guide gf, 2nd Printing
USA(fus)

3. Turn the two knobs on the floor
filler counterclockwise, then remove
the floor filler and carpeted floor
panel located in the rear of the
vehicle.
4. Remove the wing nut securing
the spare tire by turning it
counterclockwise.
5. Lift and remove the spare tire
from the spare tire well.
6. Remove the wing bolt that
secures the jack kit by turning it
counterclockwise.
7. Remove the jack kit which
includes jack (D), wheel wrench
(lug wrench) (C), wheel chock (E),
L-shaped bolt (A) and tow recovery
hook (B).
8. Turn the lead screw (where the
lug wrench attaches) of the jack by
hand to release the wheel wrench
from the jack. Press the button on
the wrench to extend the handle.
Fold down the wrench socket.
280Wheels and Tires
2013 Police(pol)
Owners Guide gf, 2nd Printing
USA(fus)

Sedan:
1. Park on a level surface, set the parking brake and activate the hazard
flashers.
2. Place the transmission selector lever in positionPand turn the engine
off.
3. Lift the trunk cargo cover, and
remove the wing nut that secures
the spare tire by turning it
counterclockwise.
4. Lift and remove the spare tire
from the trunk.
5. Remove the second wing nut that
secures the jack retention bracket
by turning it counterclockwise,
remove the jack kit from the
vehicle.
6. Remove the jack and the wrench
from the felt bag. Fold down the
wrench socket to use to loosen the
lug nuts and to operate the jack.
Vehicle jacking
1. Block the diagonally opposite
wheel.
2. Loosen each wheel lug nut
one-half turn counterclockwise but
do not remove them until the wheel
is raised off the ground.
3. The vehicle jacking points are shown here, and are depicted on the
yellow warning label on the jack.
Wheels and Tires281
2013 Police(pol)
Owners Guide gf, 2nd Printing
USA(fus)

Jack at the specified locations to avoid damage to the vehicle.
4. Small arrow-shaped marks on the sills show the location of the jacking
points.
5. Remove the lug nuts with the lug wrench.
6. Replace the flat tire with the spare tire, making sure the valve stem is
facing outward. Reinstall the lug nuts until the wheel is snug against the
hub. Do not fully tighten the lug nuts until the wheel has been lowered.
7. Lower the wheel by turning the jack handle counterclockwise.
8. Remove the jack and fully tighten the lug
nuts in the order shown. SeeWheel Lug
Nut Torque Specificationsin this chapter
for the proper lug nut torque specification.
282Wheels and Tires
2013 Police(pol)
Owners Guide gf, 2nd Printing
USA(fus)

Stowing the spare and jack (utility)
1. Replace the wheel chock in the foam tray.
2. Adjust the jack to the proper
height to install the wrench. Turn
the jack lead screw until the arrow
on the upper link is slightly below
the circle indicator shown on the
lower link.
Push the button (A) to retract the
wrench handle and place the
wrench over the raised tab on the
lower link and drop the tang (B)
through the hole in the diagonally
opposite upper link. Turn lead
screw of jack clockwise until the
arrow aligns with the circle
indicator to secure the wrench onto
the jack.
3. Place the jack in the foam tray and secure it with the attached strap.
4. Place the foam tray over the mounting bracket on the floor of the
spare tire well.
5. Replace the spare over the jack and secure with wing nut.
A
B
Wheels and Tires283
2013 Police(pol)
Owners Guide gf, 2nd Printing
USA(fus)

C
Capacities for refilling fluids ....288
Cargo management system ......168
CD ..............................................108
CD player ..................................106
Cell phone use ............................15
Changing a tire .........................278
Child safety restraints ..........26, 29
Child safety seats
attaching with tether straps ....29
automatic locking mode
(retractor) .................................36
LATCH .......................................26
Child safety seats -
booster seats ...............................21
Cleaning your vehicle ...............243
engine compartment ..............245
instrument panel ....................247
interior .....................................246
plastic parts ............................244
washing ....................................243
waxing .....................................245
wheels ......................................248
wiper blades ............................246
Climate control (see Air
conditioning or Heating) ..........115
Clock ..........................................108
Console ......................................125
overhead ..................................126
Coolant ......................................218
checking and adding ..............218
refill capacities ........................288
specifications ..........................288
Cross Traffic Alert ....................161
Cruise control ...........................159
Customer Assistance ................188Ford Extended Service
Plan ..................................295, 297
Getting assistance outside
the U.S. and Canada ..............197
Getting roadside assistance ...188
Getting the service you
need .........................................193
Ordering additional owner’s
literature .................................199
Utilizing the
Mediation/Arbitration
Program ...................................197
D
Defrost .......................................115
rear window ............................116
Dipstick
automatic transmission
fluid ..........................................223
engine oil .................................217
Driving under special
conditions ..................142, 145, 147
sand .........................................146
snow and ice ...........................148
through water .................147, 185
E
Electronic message center .........97
Electronic stability control ......154
Emergencies, roadside
jump-starting ..........................190
running out of fuel .................134
Emergency brake
(see Parking brake) ..................151
Emission control system ..........138
End user license agreement ....361
Engine ........................................287
cleaning ...................................245
370Index
2013 Police(pol)
Owners Guide gf, 2nd Printing
USA(fus)

Power steering ..........................166
fluid, refill capacity ................288
fluid, specifications .................288
Power Windows ...........................86
Privacy information ..................319
Putting a call on/off hold .........325
R
Radio ..........................................108
Single CD ................................108
Radio reception .........................106
Rear view camera display ........156
Rear window defroster .............115
Receiving a text message .........329
Recommendations for
attaching safety restraints for
children ........................................22
Relays ................................201–202
Remote entry system
illuminated entry ................68–69
locking/unlocking doors ...........67
opening the trunk .....................68
replacement/additional
transmitters ...............................64
replacing the batteries .............63
Reverse sensing system ...........156
Roadside assistance ..................188
Roll stability control .................154
Roof rack ...................................169
S
Safety Belt Maintenance ............42
Safety belts
(see Safety restraints) .........35, 38
Safety defects, reporting ..........200Safety information ....................318
Safety restraints ..............35–36, 38
Belt-Minder.............................39
Belt-Minder,
deactivating/activating .............41
extension assembly ..................38
for adults .............................35–36
for children .........................18, 22
Occupant Classification
Sensor ........................................48
safety belt maintenance ...........42
seat belt maintenance ..............42
warning light and chime ..........39
Safety restraints -
LATCH anchors ...........................26
Safety seats for children ......18, 22
Safety Compliance
Certification Label ....................294
Satellite Radio ...........................108
Scheduled Maintenance Guide
Normal Scheduled
Maintenance and Log .............303
Seat belts
(see Safety restraints) ...............35
Seats ..........................................122
child safety seats ................18, 22
front seats .......................120–121
second row seats ....................122
Selecting your media source
(USB, Line in, BT audio) .........347
Setting the clock .......................108
Side air curtain ...........................52
Side-curtain airbags system .......52
SIRIUSsatellite radio .............108
Snowplowing ...............................14
SOS Post Crash Alert .................45
Index373
2013 Police(pol)
Owners Guide gf, 2nd Printing
USA(fus)