alternator FORD PROBE 1996 2.G Owners Manual

210 %
*
[SV05600(ALL)04/95]
Cleaning the Engine
*
[SV05610(ALL)04/95]
A clean engine is more efficient because the
engine is able to cool properly. A build up of
grease and dirt acts as an insulator, keeping the
engine warmer than normal.
*
[SV05620(ALL)05/95]
q
Extreme care must be used if a power washer
is used to clean the engine. The high pressure
fluid could penetrate sealed parts and
assemblies causing damage or malfunctions.
*
[SV05630(ALL)04/95]
q
In order to avoid possible cracking of the
engine block or fuel injection pump, do not
spray a hot engine or injection pump with
cold water.
*
[SV05640(ALL)06/95]
q
The alternator, distributor and air intake must
be covered. Covering these components will
help prevent water damage.
*
[SV05650(ALL)04/95]
Never wash or rinse the engine while it is
running. Water getting into the engine may
cause internal damage.
*
[SV06100(ALL)03/95]
Filling the Fuel Tank
[SV06200(ALL)03/90]
Fuel filler door release lever
[SV06300(ALL)11/91]
Your vehicle is equipped with a fuel filler door
release. To open the fuel filler door, pull up on
the release lever which is located in front of the
driver's seat and near the door.
[SV06350(ALL)01/94]
Remote Fuel Filler-Lid Release Override
[SV06410(ALL)01/95]
If the release does not operate, open the
hatchback, remove the trim on the left rear side,
reach into the opening and pull the latch toward
the rear (see the service manual for trim
removal). You should wear gloves to protect
your hands from any sharp edges when you use
the fuel filler-lid release override.
File:prsvp.ex
Update:Fri Jun 23 19:33:26 1995