turn signal FORD PROBE 1996 2.G Owners Manual

77
Steering Column Controls
*
[SC00300(ALL)01/95]
The controls on the steering column and wheel
are designed to give you easy access to the
controls while you are driving.
*
[SC00400(ALL)01/95]
The Turn Signal Lever
*
[SC00500(ALL)01/95]
You can use the turn signal lever on the left side
of the steering column to:
*
[SC00600(ALL)08/91]
q
operate the headlamps and parking lamps
*
[SC00700(ALL)03/95]
q
operate the turn signals and cornering lamps
*
[SC00800(ALL)01/95]
q
turn the high beams on/off
*
[SC00900(ALL)05/95]
q
flash the lamps
*
[SC00950(ALL)08/91]
Headlamps and Parking Lamps
*
[SC00975(ALL)01/92]
To turn the parking lamps or headlamps on,
twist the knob at the end of the turn signal
lever.
[SC01000(ALL)05/95]
FIRST STOP Ð Turning the knob to the first
stop (g) will turn on the the license plate
lamps, parking lamps, side marker lamps, tail
lamps and instrument panel lamps.
[SC01050(ALL)05/95]
SECOND STOP Ð Turning the knob to the
second stop (B) will turn on the headlamps,
license plate lamps, parking lamps, side marker
lamps, tail lamps and instrument panel lamps.
File:prscp.ex
Update:Fri Jun 23 19:37:07 1995

80 [SC01300(ALL)02/92]
half page art:0032085-BManual headlamp retractors located behind the headlamps
*
[SC02075(ALL)05/95]
High Beams and Flashing the Lamps
*
[SC02080(ALL)05/95]
To turn on the high beams, turn the headlamp
control knob to the headlamp ON position and
push the turn signal lever away from you until
it latches. When the high beams are ON, the
high beam indicator light on the instrument
panel comes on.
*
[SC02085(ALL)05/95]
To turn off the high beams, pull the lever
toward you until it latches. The high beam
indicator light turns off.
File:prscp.ex
Update:Fri Jun 23 19:37:07 1995

81
*
[SC02090(ALL)05/95]
Flashing the Lights
*
[SC02091(ALL)06/95]
To flash the headlamps, pull the lever toward
you for a moment and then release it. The
headlamps will flash whether the headlamp
knob is in the on or off position.
[SC02093(ALL)08/91]
quarter page art:0032034-A
Highbeam and flash-to-pass operation
[SC02095(ALL)11/91]
If the headlamps are retracted when you pull
the lever toward you, they will pop up and
flash.
%*
[SC02097(ALL)05/95]
Cleaning the Exterior Lamps
*
[SC02098(ALL)05/95]
Do not use dry paper towel, chemical solvents
or abrasive cleaners to clean the lamps, as these
may cause scratches or crack the lamps.
%
*
[SC02100(ALL)03/95]
Hazard Flasher
*
[SC02200(ALL)09/93]
To alert other drivers to hazardous situations,
press the flasher switch on the top of the
steering column. All the turn signals will flash
on and off at the same time. The flashers will
also operate while the brake pedal is applied. To
turn the hazards off, press the switch again.
*
[SC02300(ALL)01/94]
The flashers work whether your vehicle is
running or not. The flashers will work for up to
two hours when the battery is fully charged and
in good condition. They will not drain the
battery excessively unless they are left on for an
extended period of time.
File:prscp.ex
Update:Fri Jun 23 19:37:07 1995

83
*
[SC02600(ALL)01/95]
Turn Signals
*
[SC02650(ALL)03/95]
Move the lever up to signal a right turn. Move
it down to signal a left turn. The corresponding
indicator light in the instrument cluster will
flash.
[SC02710(ALL)01/95]
If the turn signal stays on after you turn, move
the lever back to the center (OFF) position.
*
[SC02720(ALL)03/95]
For lane changes, move the lever far enough to
signal but not to latch. The lever will return to
the off position when you release it.
[SC03000(ALL)11/91]
half page art:0032033-A
Turn signal
File:prscp.ex
Update:Fri Jun 23 19:37:07 1995

143 %
*
[AS28400(ALL)03/95]
Clock Operation
*
[AS28500(ALL)07/90]
How to view the clock mode
*
[AS28650(ALL)07/93]
Press the ªCLOCKº button to alternate the
frequency and time in the display. In the clock
mode, pressing any radio function will
automatically display the radio frequency for
approximatedly ten seconds before changing
back to the clock mode.
*
[AS28800(ALL)07/90]
How to set the clock
*
[AS28900(ALL)04/92]
1. Turn the radio on.
*
[AS29025(ALL)03/95]
2. Press and hold in the ªCLOCKº button,
press the ªSEEKº button left (
b) to advance
the hours and right (
a) to advance the
minutes.
*
[AS29200(ALL)07/90]
NOTE: The clock displays 12-hour time with
no AM/PM indications.
*
[AS35200(ALL)06/95]
Common Radio Reception Conditions
*
[AS35300(ALL)02/95]
Several conditions prevent FM reception from
being completely clear and noise-free, such as
the following:
*
[AS35400(ALL)04/95]
1. Distance/Strength
*
[AS35500(ALL)02/95]
The strength of the FM signal is directly related
to the distance the signal must travel. The
listenable range of an average FM signal is
approximately 25 miles (40 kilometers). Beyond
this distance, the radio is operating in a fringe
area and the signal becomes weaker.
File:prasp.ex
Update:Fri Jun 23 19:35:26 1995

144
*
[AS35550(ALL)06/90]
NOTE: Always make sure your antenna
(whether you have a power antenna or
a manually adjustable antenna) is fully
extended to the maximum length for
proper reception. If your antenna is not
fully extended, you may experience
signal loss while traveling in fringe
reception areas.
*
[AS35600(ALL)04/95]
2. Terrain
*
[AS35700(ALL)02/95]
The terrain (hilly, mountainous, tall buildings) of
the area over which the signal travels may
prevent the FM signal from being noise-free.
*
[AS35800(ALL)11/92]
Repeated pops and hisses which are heard
during an otherwise clear broadcast can occur
near the station because of the ªline of sightº
characteristic of FM radio waves.
*
[AS35900(ALL)01/95]
If there is a building or large structure between
the antenna and station, some of the signal
ªbendsº around the building, but certain spots
receive almost no signal. Moving out of the
ªshadowº of the structure will allow the station
to return to normal.
*
[AS36000(ALL)01/95]
When the radio waves are reflected off objects or
structures, the reflected signal cancels the normal
signal, causing the antenna to pick up noise and
distortion. Cancellation effects are most
prominent in metropolitan areas, but also can
become quite severe in hilly terrain and
depressed roadways.
*
[AS36100(ALL)01/95]
To minimize these conditions, a stereo/mono
blend circuit has been incorporated into this
system. This feature automatically switches a
weak stereo signal to a clearer monaural signal,
which improves the quality of reception.
File:prasp.ex
Update:Fri Jun 23 19:35:26 1995

145
*
[AS36200(ALL)01/95]
Several sources of static are normal conditions
on AM frequencies. These can be caused by
power lines, electric fences, traffic lights and
thunderstorms.
*
[AS36300(ALL)01/95]
Another reception phenomenon isStrong Signal
Capture and Overload. This can occur when
listening to a weak station and when passing
another broadcast tower. The close station may
capture the more distant station, although the
displayed frequency does not change. While
passing the tower, the station may switch back
and forth a few times before returning to the
original station.
*
[AS36400(ALL)01/95]
When several broadcast towers are present
(common in metropolitan areas) several stations
may overload the receiver, resulting in
considerable station changing, mixing and
distortion.
*
[AS36500(ALL)01/95]
Automatic gain control circuitry for both AM
and FM bands has been incorporated into this
system to reduce strong signal capture and
overload.
%
*
[AS36600(ALL)08/89]
All About Radio Frequencies
*
[AS36700(ALL)06/95]
The Federal Communications Commission (FCC)
and the Canadian Radio Telecommunications
Commission (CRTC) establish the frequencies
AM and FM radio stations may use for their
broadcasts. The allowable frequencies are, AM:
530, 540...1600, 1610 kHz in 10 kHz steps; FM:
87.9, 88.1...107.7, 107.9 MHz in 0.2 MHz steps.
*
[AS36800(ALL)06/95]
Not all frequencies will be assigned to a given
area. This radio will tune to each of these
frequencies using manual tune and no fine
tuning is necessary as radio stations may not use
other frequencies.
File:prasp.ex
Update:Fri Jun 23 19:35:26 1995

256
*
[SV38800(ALL)03/95]
Lights and Bulb Replacement
*
[SV38900(ALL)01/95]
It is a good idea to check the operation of the
following lights frequently:
*
[SV39000(ALL)01/95]
q
headlamps
[SV39050(ALL)05/95]
q
high-mount brakelamp
*
[SV39100(ALL)01/95]
q
tail lamps
*
[SV39200(ALL)01/95]
q
brakelamps
*
[SV39300(ALL)01/95]
q
hazard flasher
*
[SV39400(ALL)01/95]
q
turn signals
*
[SV39500(ALL)01/95]
q
side markers
*
[SV39600(ALL)01/95]
q
license plate lamp
[SV39700(ALL)01/89]
q
fog lamps (GT model)
%*
[SV39800(ALL)01/95]
The alignment of your headlamps should be
checked if:
*
[SV39900(ALL)01/95]
q
oncoming motorists frequently signal you to
turn off your vehicle's high beams when you
do not have the high beams on
*
[SV40000(ALL)01/95]
q
the headlamps do not seem to give you
enough light to see clearly at night
*
[SV40100(ALL)01/95]
q
the headlamp beams are pointed substantially
away from a position slightly down and to
the right
*
[SV40200(ALL)03/95]
Headlamp Bulb
[SV40300(ALL)03/94]
Your vehicle has retractable halogen headlamps.
If you need to replace a headlamp, have it done
by a Ford service technician.
File:prsvp.ex
Update:Fri Jun 23 19:33:26 1995

300 Index
Lamps (continued)
interior lamps.............. 72
replacing bulbs............ 256
Lane change indicator
(see Turn signal).......... 77,83
Lights, warning and indicator
airbag................. 55
anti-lock brakes (ABS).......... 57
brake................. 55
check engine.............. 58
high beam............... 58
rear ABS................ 57
safety belt............... 54
testing the warning lights........ 43
turn signal indicator........... 77
Load limits
GAWR................ 164
GVWR................ 164
trailer towing............. 166
Lug nuts, standard........... 177
M
Maintenance schedule and record
(see separate Maintenance
Schedule and Record booklet)...... 3
Maintenance (see Servicing)....... 203
Maintenance (see servicing)........ 203
Manual transaxle
clutch................ 153
shifting gears............. 154
shift speeds.............. 156
Manual transmission
backing up (reverse).......... 155
shifting gears............. 154
shift speeds.............. 156
Map pockets.............. 115
Master cylinder, brakes......... 245
Methanol in fuel............. 214
File:prixp.ex
Update:Fri Jun 23 19:30:26 1995

Index 305
Transaxle control switch......... 149
Transmission, automatic operation.... 147
Transmission control switch....... 149
Trip odometer.............. 62
Tune-up specifications (VECI)...... 263
Turn signal
indicator lights............. 83
lever............... 77,83
U
Upshift speeds............. 156
Used engine oil, disposal . . 204, 220, 225, 244
V
VECI (Vehicle Emission Control Information)
decal................ 263
Vehicle Identification Number (VIN) . . . 193
Vehicle loading
automatic transaxles......... 165
automatic transmissions........ 165
calculating the load.......... 165
manual transaxles........... 165
manual transmissions......... 165
Vehicle storage............. 271
Ventilating your vehicle
(see Climate control).......... 65
Viscosity (see Engine oil)........ 217
W
Warm engine, starting........... 44
Warning chimes, safety belt........ 54
Warning lights, testing........... 43
Warning lights (see Lights)......... 51
Warranties
basic.................. 4
Canada................ 4
radio................ 146
Warranty Information Booklet....... 4
File:prixp.ex
Update:Fri Jun 23 19:30:26 1995