remove seats FORD PROBE 1997 2.G Owners Manual

52
*
[CF05800(ALL)05/96]
Tips for controlling the temperature in your
vehicle
*
[CF05900(ALL)01/96]
q
To vary the temperature inside your vehicle,
move the temperature selector toward the red
area for warmer air and toward the blue area
for cooler air.
*
[CF06000(ALL)01/96]
q
If you drive with the fan off and the
windows closed, the windows may fog up.
To prevent fogging:
[CF06100(ALL)01/96]
1. Set the function selector control to VENT,
MIX, FLOOR or theVposition.
*
[CF06200(ALL)01/96]
2. Set the desired temperature.
*
[CF06300(ALL)04/96]
3. Set the
H(fan speed) to the desired
position.
*
[CF06400(ALL)01/96]
q
Do not put objects under the front seats that
will interfere with the flow of air to the back
seats.
*
[CF06500(ALL)01/96]
q
Remove any snow, ice, or leaves from the
area below the windshield on the outside of
your vehicle. They could block the air intake.
File:05prcfp.ex
Update:Tue Jun 11 11:03:33 1996

98
*
[SS03300(ALL)05/96]
RWARNING
Cargo should always be secured to
prevent it from shifting and causing
damage to the vehicle or harm to
passengers.
*
[SS03400(ALL)01/96]
RWARNING
Do not remove the floor carpet in your
vehicle. Emission controls cause high
exhaust temperatures under the floor.
[SS03500(ALL)01/96]
NOTE: When returning the folding seats to the
upright position, remember to return
rear shoulder belts to their proper
position.
[SS03600(ALL)03/96]
NOTE: Your vehicle has stowage hooks on the
lower rear side trim panel on which to
hook the safety belts when not in use.
Simply hook the tongue slot over the
stowage hook.
%
*
[SS03700(ALL)02/96]
Important Safety Belt Information
*
[SS03800(ALL)05/96]
The use of safety belts helps to restrain you and
your passengers in case of a collision. In most
states and in Canada, the law requires their use.
*
[SS03900(ALL)02/96]
Safety belts provide best restraint when:
*
[SS04000(ALL)02/96]
q
the seatback is upright
*
[SS04100(ALL)02/96]
q
the occupant is sitting upright (not slouched)
*
[SS04200(ALL)02/96]
q
the lap belt is snug and low on the hips
*
[SS04300(ALL)02/96]
q
the shoulder belt is snug against the chest
*
[SS04400(ALL)02/96]
q
the knees are straight forward
File:06prssp.ex
Update:Mon Jun 3 10:07:19 1996

123
*
[SS20500(ALL)08/95]
Rear Seats
[SS20600(ALL)01/96]
If you use a tethered safety seat on one of the
rear seats, install a tether anchor bracket to one
of the two 0.3 inch (8 mm) weld nuts on the
rear of the cargo area below the opening for the
liftgate.
*
[SS20700(ALL)01/96]
Tether Anchorage Hardware
[SS20800(ALL)01/96]
Tether anchor hardware kits can be obtained at
no charge from any Ford or Lincoln-Mercury
dealer.
*
[SS20900(ALL)01/96]
Be sure to follow the child safety seat
manufacturer's instructions.
*
[SS21000(ALL)01/96]
RWARNING
Tighten the anchor according to
specifications. Otherwise, the safety seat
may not be properly secured and the child
may be injured in a sudden stop or
collision.
[SS21100(ALL)01/96]
Installing the Anchor Bracket
[SS21200(ALL)01/96]
1. Open the liftgate and take out the luggage
compartment cover (if equipped).
[SS21300(ALL)01/96]
2. The anchorage nuts used to secure the tether
anchor are located in the rear body panel
behind the trim at the rear of the luggage
compartment. Remove the trim panel. The
backside of the panel is scored at the
locations of the anchorage nuts. Make a hole
the size of the scoring in the trim panel to
provide access to the anchor nut. The hole
should be made on the same side of the
vehicle as the child safety seat will be
located. Reinstall the trim panel.
File:06prssp.ex
Update:Mon Jun 3 10:07:19 1996

233
*
[MC63900(ALL)05/96]
If you have whitewall tires that are difficult to
clean with regular detergent, use whitewall tire
cleaner. Follow the directions on the container
and rinse the tires with plenty of clean water.
%*
[MC64000(ALL)02/96]
Cleaning the Interior Lamps
*
[MC64100(ALL)02/96]
Your interior dome lamps and map lamps are
plastic and should be cleaned with a mild
detergent diluted in water. Rinse them with clear
water.
[MC64110(ALL)03/96]
Cleaning the Instrument Panel Lenses
[MC64120(ALL)04/96]
To clean the lenses on your instrument panel,
use Ford Glass Cleaner and a soft cloth. Never
use paper towels or abrasive cleaners; they can
scratch the lenses.
%*
[MC64500(ALL)03/96]
Cleaning the Seats
*
[MC64600(ALL)01/96]
Leather
*
[MC64700(ALL)01/96]
For routine cleaning, wipe the surface with a
soft, damp cloth. For more thorough cleaning,
wipe the surface with a leather and vinyl cleaner
or a mild soap.
%*
[MC64800(ALL)05/96]
Fabric
*
[MC64900(ALL)05/96]
Remove dust and loose dirt with a whisk broom
or a vacuum cleaner. Remove fresh spots
immediately. Follow the directions that come
with the cleaner.
*
[MC65000(ALL)05/96]
NOTE: Before using any cleaner, test it on a
small, hidden area of fabric. If the
fabric's color or texture is adversely
affected by a particular cleaner, do not
use it.
File:11prmcp.ex
Update:Thu May 16 12:08:53 1996