recommended oil FORD RANGER 1998 2.G Owners Manual

Adding engine oil
1. Check the engine oil. For instructions, refer toChecking the engine
oilin this chapter.
2. If the fluid level is not within the normal range, add only certified
engine oil of the preferred viscosity. Add engine oil through the oil filler
cap. Remove the filler cap and use a funnel to pour oil in the opening.
3. Recheck the oil level. Make sure the oil level is not above the MAX
mark or the letter F in FULL on the dipstick.
Engine oil and filter recommendations
Look for this certification mark.
Ford oil specification is WSS-M2C153-G.
Use SAE 5W-30 motor oil certified for gasoline engines by the American
Petroleum Institute.
Do not use supplemental engine oil additives, oil treatments or engine
treatments. They are unnecessary and could, under certain conditions,
lead to engine damage which is not covered by your warranty.
Change your engine oil and filter according to the appropriate schedule
listed in the ªService Guideº.
Ford production and aftermarket (Motorcraft) oil filters are designed for
added engine protection and long life. If a replacement oil filter is used
that does not meet Ford material and design specifications, startup
engine noises or knock may be experienced.
It is recommended you use the appropriate Motorcraft oil filter
(or another brand meeting Ford specifications) for your engine
application.
Maintenance and care
117

Changing the engine oil and filter
Change your engine oil and filter according to the appropriate schedule
listed in the ªService Guideº.
Ford production and aftermarket (Motorcraft) oil filters are designed for
added engine protection and long life. If a replacement oil filter is used
that does not meet Ford material and design specifications, startup
engine noises or knock may be experienced.
It is recommended you use the appropriate Motorcraft oil filter (or
another brand meeting Ford specifications) for your engine application.
BRAKE FLUID
Checking and adding brake fluid
Brake fluid should be checked and
refilled as needed at least once each
year:
1. Clean the reservoir cap before
removal to prevent dirt or water
from entering the reservoir.
2. Visually inspect the fluid level.
3. If necessary, add brake fluid until
the level reaches MAX. Do not fill
above this line.
4. Use only a DOT 3 brake fluid
certified to meet Ford specifications.
Refer toLubricant specificationsin theCapacities and specifications
chapter.
MAX
MIN
Maintenance and care
118

Recommended fuel Unleaded fuel only - 87 octane
Fuel tank capacity
(Regular cab-Short wheel base)62.8L (16.6 gallons)
Fuel tank capacity
(Regular cab-Long wheel base)75.7 (20.0 gallons)
Fuel tank capacity (SuperCab) 74.2L (19.6 gallons)
Engine oil capacity
(with filter change)-
2.5L and 3.0L engines4.3L (4.5 quarts). Use Motorcraft
5W30 Super Premium Motor Oil,
Ford Specification WSS-M2C153-G
Engine oil capacity
(with filter change)-
4.0L engine4.7L (5.0 quarts). Use Motorcraft
5W30 Super Premium Motor Oil,
Ford Specification WSS-M2C153-G
Tire size and pressure See Safety Compliance
Certification Label on inside of
driver door.
Hood release Pull handle under the left side of
the instrument panel
Coolant capacity-2.5L
without air conditioning6.2L (6.5 quarts)
Coolant capacity-2.5L
with air conditioning6.8L (7.2 quarts)
Coolant capacity-3.0L
without air conditioning9.0L (9.5 quarts)
Coolant capacity-3.0L
with air conditioning9.6L (10.2 quarts)
Coolant capacity-4.0L
without air conditioning7.4L (7.8 quarts)
Coolant capacity-4.0L
with air conditioning8.1L (8.6 quarts)
Power steering fluid capacity Fill to range on dipstick
Manual transmission fluid capacity 2.65L (2.8 quarts)
Automatic transmission fluid
capacity-4x2 vehicles9.0L (9.5 quarts)
Automatic transmission fluid
capacity-4x4 vehicles9.3L (9.8 quarts)
Filling station information
159