check engine FORD SIERRA 1991 2.G Cooling And Air Conditioning Systems Workshop Manual

FORD SIERRA 1991 2.G Cooling And Air Conditioning Systems Workshop Manual SIERRA 1991 2.G FORD FORD https://www.carmanualsonline.info/img/11/5453/w960_5453-0.png FORD SIERRA 1991 2.G Cooling And Air Conditioning Systems Workshop Manual

Page 3 of 12

FORD SIERRA 1991 2.G Cooling And Air Conditioning Systems Workshop Manual passing over the evaporator fins on its way to
the vehicle interior. The refrigerant becomes a
gas again and the cycle is repeated.
Various subsidiary controls and sensors
protect the system against e

Page 7 of 12

FORD SIERRA 1991 2.G Cooling And Air Conditioning Systems Workshop Manual 36Tighten the coolant pump securing bolts,
and where applicable the pump pulley
securing bolts, to the specified torque. 
37On completion, refill the cooling system.
Refer to Chapter 1, Section 21.
Re

Page 8 of 12

FORD SIERRA 1991 2.G Cooling And Air Conditioning Systems Workshop Manual DOHC models
6Disconnect the battery negative lead.
7To provide additional clearance when
removing the cooling fan shroud assembly
(which is removed from below the vehicle),
apply the handbrake, then j

Page 9 of 12

FORD SIERRA 1991 2.G Cooling And Air Conditioning Systems Workshop Manual 2With the engine cold, slowly unscrew the
expansion tank cap to release any remaining
pressure from the cooling system, then refit
the cap.
3Disconnect the wiring from the sender
terminal (see illustr