wheel alignment FORD SIERRA 1992 2.G XR4 Workshop Manual
[x] Cancel search | Manufacturer: FORD, Model Year: 1992, Model line: SIERRA, Model: FORD SIERRA 1992 2.GPages: 45, PDF Size: 1.33 MB
Page 12 of 45

pA Constant Velocity Joints & Boots The Merkur XR4Ti and Scorpio
independent rear axle assemblys utilize half shafts that have inner and outer constant
velocity joints. Eventually these joints and protective boots will require service. We
have joints and boots available separately making it economical to replace just the
worn component without having to replace whole axle assembly. However, if more
than one C.V. per axle requires service, our complete axle assembly is the more cost
effictive way to go.
Note: right/left inboard and outboard C.V. joints and boots are
interchangeable- see price list for complete axle prices (handed left & right)
Constant Velocity Joint- XR4 & ScorpioM550B
C.V. Boot Kit-
XR4 & ScorpioM550BK
Complete Axle(specify left or right)-
XR4 & ScorpioM550L/R
pB
Rubber Drive Shaft Coupling The rubber "Drive Donut" or "Rotoflex
Coupling" on the XR4 and Scorpio drive shaft can be a real bugger. Many owners
have contacted us after being quoted up to 500.00 to totally replace the complete
drive shaft assembly by the local Ford L/M dealer, as they do NOT list the rubber
drive coupling as a separate service part. We import the proper replacement
drive coupling and make it available at considerable savings to you. If your car
exhibits a driveline shudder that increases with speed, (especially noticeable in
colder weather) we recommend taking a close look at the condition of the drive
coupling. Cracks in the rubber or missing pieces will require immediate replace-
ment, loosing one of these joints at speed will be very messy !
Note: BAT supplies
the standard equipment XR4i drive coupling by the original supplier to Ford. This
is not a lesser "fits all" component that just happens to be similar.
Rubber Drive Shaft Coupling- XR4 & ScorpioM17A
pC
Drive Shaft Center Support Bearing- Replacement driveshaft
center support bearing assemblys for XR4Ti and Scorpio.
Drive Shaft Center Support Bearing- XR4Ti M550SB
Drive Shaft Center Support Bearing- Scorpio G550SB
pD
Quaife Torque Biasing Differential Quaife torque biasing
differentials provide a constant and infinitely variable output to both rear
wheels. These unique differentials utilize a series of helical gears which
sense the amount of applied torque and adjust automatically for loss of
traction. The Quaife limited slip design is also free of high wear items
(clutches, ratchets and plates), making them stronger and more maintenance
free than other types of limited slip units. Anyone who has had the pleasure
of driving a vehicle equipped with a Quaife LSD will immediately comment on
its smooth seamless performance, very unlike clutch/plate type LSD's which
exhibit a notchy ratchet like take up through the drive line. The Quaife LSD
that we offer is originally designed as a replacement upgrade for the Sierra
Cosworth and are now supplied with output flanges tapped for either the large
108mm (Cosworth size) or smaller 100mm (XR4 size) C.V. joints.
Quaife Limited Slip DifferentialM710
pE
Clutch Kits We have a very good selection of clutch packages that include
clutch disk, pressure plate, throw out bearing, and clutch alignment tools. Buying one
of our engineered kits will guarantee best quality, performance, fitment (ease of
installation) and price. First option is a new (not rebuilt or re-lined) O.E. quality
replacement clutch kit by Sachs/Valeo. This clutch is best suited for standard or
slightly modified cars being used under normal driving conditions. If your requirements
are beyond the capabilities of the standard clutch we also have some heavy duty clutch
kit options. H.D. clutch kits include pressure plates that have increased clamping force
(from 30 to 50%) and clutch disks with high temperature friction materials applied.
Centerforce H.D. clutch kits have a unique centrifugal pressure plate design with
substantially more clamping force but requires very little pedal pressure over the stock
clutch.
Note: all kits are for standard transmission 1" 23 spline except where noted.
Sachs Clutch Kit XR - best quality O.E. clutchM519K
Sachs Clutch Kit Scorpio -
best quality O.E. clutchG519K
Sachs Clutch Kit XR w/ T5 Trans -
1 1/16" 10 spline for T-5 transM519T5
H.D. Centerforce Clutch Kit -
uprated disk & 30% p. plateM519C
H.D. Center Force II Clutch Kit -
uprated disk & 50% p. plateM519C2
Clutch Alignment Tool -
1" 23 spline for std. transmissionS11H
Clutch Cable- XR4Ti M562
Clutch Cable- Scorpio G562pD
Driveline
pA
pD pB
pC
1 1
Page 37 of 45

07/30/02Price List3 6
PAGE 10 driveline components
C.V. Joint- XR & Scorpio M550B 92.50
C.V. Boot Kit- XR & Scorpio M550BK 14.90
C.V. Socket Head Cap Screw (6 per joint) M550CS 1.05ea
C.V. Locking Plate (3 per joint) M550LP 1.35ea
Axle/Halfshaft Complete* (LH)- XR & Scorpio M550L 169.50
Axle/Halfshaft Complete* (RH)- XR & Scorpio M550R 169.50
*axle/halfshaft, joints (2), boots (2), assembled/greased ready for installation
add 75.00 core charge for this item- refundable on return
Driveshaft Coupling- XR & Scorpio M17A 62.50
Drivesahft Center Support Bearing-XR M550SB 109.75
Drivesahft Center Support Bearing- Scorpio G550SB 98.00
Quaife LSD M710 1245.00
Clutch Kit Sachs- XR M519K 179.50
Clutch Kit Sachs- Scorpio G519K 257.50
Clutch Kit Sachs- XR w/ T-5 trans M519T5 179.50
H.D. Clutch Kit Centerforce (30% kit) M519C 309.95
H.D. Clutch Kit Centerforce II (50% kit) M519C2 361.98
Clutch Alignment Tool (1" 23 spline) S11H 6.00
Clutch Cable- XR4Ti M562 29.50
Clutch Cable- Scorpio G562 76.50
BAT is always testing and
developing new products....if
you don't see it listed ask... we
might have what you are looking
for, or can point you in the right
direction.
PAGE 8 brake kits & specials
Front Brake Spacial- XRM420SP 105.00
Front Brake Spacial- ScorpioG420SP 115.00
Front R/S Brake Kit 283x24mm (standard) M417 295.00
Front R/S Brake Kit 283x24mm (w/x-drill) M417A 329.00
Front R/S Brake Kit 283x24mm (standard/M1144 ) M418 339.00
Front R/S Brake Kit 283x24mm M1144/x-drill) M418A 395.00
BAT/Wilwood Brake Kit 283mm M416W 645.00
BAT/Wilwood Brake Kit 300mm M416W3 725.00
PAGE 9
rear brake components
Rear Wheel Cylinder- XRM420WC 35.95
Rear Brake Shoe Set (Motorcraft/Mintex)- XRM420R 49.95
Rear Brake Drum
- XRM420RD 74.00
Rear Brake Drum (grooved)
- XRM420RDG 129.50Aeroquip Rear Brake Lines (pair)- XRM419R 47.50
Rear Brake Line O.E. Rubber (each)- XR4 (1985-89)M419SR 27.45
Aeroquip Rear Brake Lines (4 line set)- ScorpioG419R 85.00Rear Brake Hardware Kit- XR M420K5 25.60
Rear Brake Special- XR M420RSPL 125.00
Rear Disk Brake Kit- XR M420RK 689.00
Hand Brake Cable- XR M564 44.00
Handbrake Cable- Scorpio G564 44.00
Hand Brake Cable- Cosworth Z16567 44.00
Rear Caliper* (specify left or right) for M420RK kit127.50
*this item requires an additional 75.00 core charge refundable upon core return
Rear Rotor (each) for M420RK kit52.50
Rear Brake Pad (set) for M420RK kit25.00
Rear Rotor (standard)- Scorpio (each)G425R 39.75
Rear Rotor (x-drilled)- Scorpio (each)G425RCD 92.00Rear Caliper (left)- Scorpio (each)G420RL 124.50
Rear Caliper (right)- Scorpio (each)G420RR 124.50
*this item requires an additional 75.00 core charge refundable upon core returnRear Brake Pad Set- Scorpio (Semi-Metalic)G420R 39.00
ABS Brake Sensor Scorpio/XR4- Rear G420SR 177.25
PAGE 7 front brake components
Front Caliper* (left)- XR & Scorpio M420CL 64.75
Front Caliper* (right)- XR & Scorpio M420CR 64.75
M420CL/CR calipers are not supplied with slide pins or bushings (available below)
Front Caliper Complete* (LH) includes mount & pads M420CL-L 90.00
Front Caliper Complete* (RH) includes mount & pads M420CL-R 90.00
*this item requires an additional 75.00 charge refundable upon core return
Caliper Repair Kit- XR & ScorpioM420K4A 55.00
Caliper Seal Kit-
XR & ScorpioM420K4 17.75
Caliper Slide Bushings (2) does 1 caliper M420CB 14.00
Caliper Slide Pins (2) does 1 caliper M420CP 16.35
Caliper Spring (anti-rattle) each M420CS 6.39
Front Brake Pad Set*- Mintex A/F (Semi-Metalic) M420MM 39.00
Front Brake Pad Set*- Mintex 1144 (street/competition) M420G 75.00
Front Brake Pad Set*- Mintex 1155 (full competition) M420G 112.30
*brake pads will fit both XR4 and Scorpio
Front "Low Pad" Sensor Wiring Harness- XR/Scorpio M420WS 32.49
Front Rotor (standard)- XR (each)M425 42.50
Front Rotor (standard)- Scorpio (each) G425 49.75
Front Rotor (x-drilled)- XR (each)M425CD 79.50
Front Rotor (x-drilled)- Scorpio (each) G425CD 99.00
Front Rotor (x-drilled & slotted combo)- XR (each)M425CDS 89.50
Front Rotor (x-drilled & slotted combo)- Scorpio (each)G425CDS 109.00
Master Cylinder* XR4 1985-86 (Bendix)- XRM420MC 109.50
*this item requires an additional 20.00 charge refundable upon core return
Master Cylinder* XR4 1987-89 (Bendix)- XRM420MCL 122.50
*this item requires an additional 50.00 charge refundable upon core return
Aeroquip Front Brake Lines (pair)- XR4 (1985-88)M419 42.50
Front Brake Line O.E. Rubber (each)- XR4 (1985-86)M419SF 25.75
Aeroquip Front Brake Lines (pair)- XR4 (1987-89)G419 52.40
Aeroquip Front Brake Lines (pair)- ScorpioG419 52.40
ABS Brake Sensor Scorpio/XR4- Front G420SF 179.75
PAGE 11 brake components
Brake Fluid AP550 (500 ml) MC550 10.70
Brake Fluid Wilwood 570 (355 ml) MC570 5.95
Brake Fluid Wilwood 570 (6-pack) MC57-6 33.00
Brake Fluid Wilwood 570 (24 case) MC57-C 119.00
Front Rotor Cosworth 283 x 24mm (standard) M426 75.00
Front Rotor Cosworth 283 x 24mm (X-drilled) M426CD 108.00
Front Rotor Cosworth 283 x 24mm (Grooved) M426G 130.00
Rear Rotor Cosworth 273 x 10mm (standard) 45.00
Rear Rotor Cosworth 273 x 10mm (X-drilled) 65.00
Rear Rotor Cosworth 273 x 10mm (Grooved) 86.50
Front Rotor Scorpio 260 x 24mm (standard)G425 49.75
Front Rotor Scorpio 260 x 24mm (X-drilled)G425CD 99.00
Rear Rotor Scorpio 253 x 10mm (standard)G425R 39.75
Rear Rotor Scorpio 253 x 10mm (X-drilled)G425RCD 92.10
Front Brake Kit- BAT R/S 285 x 24mm (standard) M418 339.00
Front Brake Kit- BAT R/S 285 x 24mm (x-drilled) M418A 395.00
Front Brake Kit- Wilwood 283 x 24mm M417 645.00
Front Brake Kit- Wilwood 300 x 32mm M416A 1295.00
Front Brake Kit- Wilwood 300 x 32mm (Scorpio) G416A 1395.00
Rear Brake Kit- Wilwood 300 x 21mm 1200.00
Front Wheel Bearing Kit (RH)-XR M560FR 42.00
Front Wheel Bearing Kit (LH)-XR M560FL 42.00
Front Wheel Bearing Kit (RH) Scorpio G560FR 59.00
Front Wheel Bearing Kit (LH) Scorpio G560FL 59.00
Rear Wheel Bearing Kit (RH)-XR M560RR 42.00
Rear Wheel Bearing Kit (LH)-XR M560RL 42.00
Rear Wheel Bearing Kit (RH) Scorpio G560RR 98.75
Rear Wheel Bearing Kit (LH) Scorpio G560RL 98.75
Nut- Front Hub (LH) blue M550N-LF 6.65
Nut- Front Hub (RH) yellow M550N-RF 6.65
Nut- Rear Hub (LH) white M550N-LR 7.42
Nut- Rear Hub (RH) white M550N-RR 7.42