spare tire FORD SUPER DUTY 2010 2.G Quick Reference Guide

PREMIUM PLUS In-DaSh SIx CD/MP3/SatELLItE CoMPatIbLE SoUnD SyStEM
Tire Pressure
Check your tire pressure at least
once a month and before long
trips (including the spare). The
recommended specifications are on
the Safety Compliance Certification
Label or Tire Label located on the
B-Pillar or the edge of the driver’s
door. As an added safety feature,
your vehicle has been equipped with
a Tire Pressure Monitoring System
(TPMS) that illuminates a low tire
pressure warning light when one
or more of your tires is significantly
under-inflated. Refer to the Tires,
Wheels and Loading chapter in your
Owner’s Guide for more information.
LocaTion of sP are Tire
and TooLs
Your vehicle is equipped with a
temporary spare tire which is
designed for emergency use only
and should be replaced as soon
as possible. Due to the different
possible cab configurations, please
refer to the Roadside Emergencies chapter in your Owner’s Guide
for spare tire and tool location in
addition to complete details on
how to change your tire.
r
oadside assisT ance
Your new Ford Super Duty comes
with the assurance and support
of 24-hour emergency roadside
assistance. Roadside assistance
includes such services as: lockout
assistance, limited fuel delivery,
battery jump starts, changing a flat
tire, towing, and winch out. To receive
roadside assistance in the United
States, call 1 (800) 241-3673. In
Canada, call 1 (800) 665-2006.
sos Pos T-crash aLer T s ys Tem™
Your vehicle is equipped with the
SOS Post-Crash Alert system. This
system provides audible and visual
alarms in the event of a crash
which causes the deployment of
airbags or the activation of the
safety belt pretensioners. The turn
signals will flash and the horn will sound. To deactivate the system,
press the hazard flasher control,
or you can press on your
remote transmitter.
imProve y our fueL economy
Below are several ways to improve
fuel economy while driving:
• Drive sensibly
• Keep tires properly inflated
• Use cruise control
• Don’t carry more than you need
(you will lose up to 1% in fuel
economy per 100 lbs [45 kg])
• Observe the speed limit (speeds
in excess of 70 mph [112 km/h]
decrease overall fuel economy)
• Make sure your vehicle is
properly maintained
• Check and replace air
filter regularly
• Use recommended grade
of motor oil
• Avoid excessive idling
• Add tonneau cover (available
as a Ford accessory) memory fea
Ture (if equipped)
Your vehicle may be equipped with a memory feature, which allows your vehicle to ‘remember’ your desired settings
for your seats, mirrors and adjustable pedals (if equipped). To set, move your seat, mirrors and adjustable pedals
(if equipped) to the desired position. Press and hold either memory button 1 or 2 for five seconds. Continue to hold
until two tones are heard. Within three seconds of the second tone, press
on your remote transmitter. Your settings
are now saved and will be activated when that remote transmitter is used to unlock your vehicle.
TaiLga Te sTeP (if equipped)
Your vehicle may be equipped with a tailgate step that allows easy entry into
the truck bed. To use, open the tailgate. Pull the yellow latch lever to the
unlock position to release the grab handle from its stowed position and raise
the handle upright until you feel it latch and see the latch lever in the lock
position. (The yellow lever only needs to be used when releasing the grab
handle.) Rotate the center molding to unlatch the tailgate. Flip open the panel
to widen the step. Always use the grab handle when stepping up or down on
the tailgate step. Keep the step load (you + load) below 350 lb. (159 kg).
To close the tailgate step, fold the step panel, then lift and fully slide the tailgate step into the tailgate. Slide the latch
at the bottom of the handle, then lower the handle. Never drive with the step deployed. Ensure that you fully close and
latch the tailgate step before moving the vehicle.
Bed exTender (if equipped) To open the bed extender into tailgate mode, start with the
right side panels by pulling the locking pin toward the
driver’s side of the vehicle. Unlatch the panels and
then rotate the panels toward the tailgate. Rotate
the storage hinge rearward and then rotate the
panels toward the tailgate. Engage locking pin
to the right. Repeat for the left side panels of
the bed extender. Connect the two panels at
the center, then rotate both knobs a quarter
turn clockwise to secure them. Ensure that
the latch rod is inserted into the tailgate
hole and the locking pins on BOTH sides
are engaged into their holes in the pick-up
box. Please refer to your Owner’s Guide for
complete details on this feature.
rearview camera (if equipped) Your vehicle may be equipped with a reverse camera located
on the liftgate, which provides a visual display of the area
behind the vehicle. The display will automatically appear in
the rearview mirror or on the navigation system screen
(if equipped) whenever the vehicle is in Reverse (R) and uses
colors (green, yellow and red) to alert you of your proximity to objects.
Note: Visibility aids do not replace the need to watch where the vehicle is moving. Refer t o your Owner’s Guide for
safety information, more detail and limitations.
Use extreme caution when using
any device or feature that may take
your attention off the road. Your
primary responsibility is the safe
operation of the vehicle. Only use
non-essential features and devices
when it is safe to do so.
1. seTTing memory PreseTs
To set a station: Select a frequency
band with the AM/FM button, then
select a station. Press and hold a
numbered preset button 1–6 until
the sound returns.
2. TexT/scan funcTion
Press and hold for a brief sampling
of radio stations or satellite radio
channels (if equipped). Press again
to stop. In CD/MP3 mode, press
and release to display track title,
artist name, disc title and file name
(if available).
3. am/fm and cd seLecT
Press AM/FM repeatedly to cycle
through AM, FM1 or FM2 frequency
bands. Press CD to begin CD play.
4. on/off/voLume conTroL
Press to turn on/off. Turn to

increase/decrease the volume.
5. Loading cds
To load a CD into the system,
press LOAD. When prompted,
select the desired slot (1-6)
using the memor y presets and
insert the CD into the system. Press and hold LOAD to autoload
up to six discs.
6. eJecTing cds
Press to eject a CD. Press and
hold to auto-eject all CDs present
in the system.
7. seeK funcTion
Press to access the next listenable
station , CD track, or previous
satellite radio station.
8.

Press to access SYNC® phone
features (if equipped). If your
vehicle is not equipped with SYNC
®,
the display will read NO PHONE.
9. Tune/disc seLecTor
Press to go up or down the radio
frequency or to select a desired disc.
10. menu
Press repeatedly to access the
following settings, among others:
SPEED VOL (Speed sensitive
volume, if equipped):
The volume automatically changes
slightly with vehicle speed to com-
pensate for road and wind noise.
Use
/ to adjust.
SETTING THE CLOCK: Press MENU
until SELECT HOUR or SELECT MINS
is displayed. Press
/ to adjust the
hours/minutes.
SATELLITE RADIO MENU:
(if equipped): Press MENU when satellite radio mode is active to
access. Press OK to enter into the
satellite radio menu. Press
/ to
cycle through additional options.
SIRIUS
® Satellite Radio is a
subscription based satellite radio
service that broadcasts music,
sports, news and entertainment
programming. For more information
and a complete list of SIRIUS
®
satellite radio channels, visit
www.sirius.com in the United States,
www.sirius-canada.ca in Canada,
or call SIRIUS
® at 1–888–539–7474.
11. aux
Repeatedly press to cycle through
FES/DVD (if equipped), SYNC
®
(if equipped), SAT1, SAT2, SAT3
(satellite radio mode, if equipped)
or LINE IN (auxiliary audio mode
if equipped).
VOICE-ACTIVATED NAVIGATION
SYSTEM (if equipped):
Your vehicle may be equipped with
a voice-activated navigation system
which integrates several functions
including voice recognition,
destination entry and SIRIUS
®
satellite radio (if equipped) in one
easy to use system. Note: Some
features are unavailable while
driving. Refer to your Navigation
Supplement for more information.
DUaL aUtoMatIC tEMPERatURE ContRoL Sy StEM
a. auTo
Press to engage automatic
temperature control, and select
the desired temperature using the
temperature control. The system will
automatically determine fan speed,
airflow location, A/C on or off, and
outside or recirculated air to heat or
cool the vehicle, allowing it to reach
the desired temperature.
B. driver/Passenger
TemPeraTure conTroLs
Press to increase or decrease the
temperature on the driver or
passenger side of the vehicle.
c. exT
Press to display outside temperature.
Press again to display cabin
temperature settings.
d. fan sPeed conTroL

Press to increase or decrease the
fan speed.
e. hea Ted sea T conTroLs
Press to turn the heated seats on
and off. The heated seats turn off
when the ignition is turned off.
f. manuaL override conTroL
Allows you to manually select
where airflow is directed. Press
repeatedly to cycle through all
possible options. To return to full
automatic control, press AUTO. g. a/c conTroL
Press to activate/deactivate air
conditioning. Use with

(recirculated air) to improve cooling
performance and efficiency.
Engages automatically in AUTO,

(defrost) and
(floor/defrost).
h. recircuLa Tion conTroL

Recirculates air in the cabin, thereby
reducing the amount of time needed
to cool down the interior of the
vehicle when used with A/C.
i. duaL
Press to activate dual zone climate
control where the passenger and
driver can set their own individual
climate settings. Press again to
deactivate and return to single zone
where the driver’s climate settings
determine the climate settings for
the entire vehicle.
J. hea Ted mirrors

Press to defrost the outside rear
view mirrors. The heated mirrors
will turn off after 10 minutes or
can be shut off by pressing the
button again.
K. defrosT

Use to clear ice or fog from the
windshield by distributing air
through the windshield defroster
and demister vents. max a/c oPera
Tion
Automatic Operation: Press AUTO
for full automatic operation. Do not
override A/C or recirculated air.
Set the temperature to 60˚F (16˚C).
Override Operation: Press

repeatedly to select airflow
distribution. Press A/C and

(together, these provide a colder
airflow). Set temperature to 60˚F
(16˚C). Set to highest front fan
speed initially, then adjust to
maintain comfort.
raPid hea T
suPPLemenT aL
hea Ting sysTem (if equipped)
If your vehicle is equipped with a
diesel engine, it may be equipped
with a supplemental heater to assist
in heating the inside of your vehicle
in cold weather. For maximum
effectiveness, mid to lower blower
speed is recommended during
initial warm-up. When operating in
automatic mode (if equipped),
the climate control system will
determine the appropriate blower
speed for existing conditions.4
3
3
2
1
6987
11
B
A
DEGHEI
C
10
K
B
J
5
F
Ford Motor Company Customer Relationship Center | P.O. Box 6248 | Dearborn, MI 48121
1-800-392-3673 (FORD) (TDD for the hearing impaired: 1-800-232-5952)
This Quick Reference Guide is not intended to replace your vehicle Owner\
’s Guide which contains more
detailed information concerning the features of your vehicle, as well as\
important safety warnings designed to
help reduce the risk of injury to you and your occupants. Please read yo\
ur entire Owner’s Guide carefully as
you begin learning about your new vehicle and refer to the appropriate c\
hapters when questions arise.
All information contained in this Quick Reference Guide was accurate at \
the time of duplication. We reserve
the right to change features, operation and/or functionality of any vehi\
cle specification at any time. Your Ford
dealer is the best source for the most current information. For detailed\
operating and safety information,
please consult your Owner’s Guide.
May 2009
First Printing
Quick Reference Guide Super Duty
Litho in U.S.A.
AC3J 19G217 AA
PREMIUM PLUS In-DaSh SIx CD/MP3/SatELLItE CoMPatIbLE SoUnD Sy StEM (if equipped) DUaL aUtoMatIC tEMPERatURE ContRoL Sy StEM WITH HEATED SEATS AND HEATED MIRRORS (if equipped)
2010 Ford
quick reference guide