bulb FORD SUPER DUTY 2012 3.G User Guide

FORD SUPER DUTY 2012 3.G User Guide SUPER DUTY 2012 3.G FORD FORD https://www.carmanualsonline.info/img/11/5300/w960_5300-0.png FORD SUPER DUTY 2012 3.G User Guide

Page 99 of 454

FORD SUPER DUTY 2012 3.G User Guide Replacing front clearance and identification lamp bulbs
(if equipped)
1. Make sure the headlamps are off.
2. Remove the screw and lens from
the lamp assembly.
3. Pull the bulb straight out of the
sock

Page 283 of 454

FORD SUPER DUTY 2012 3.G User Guide Switching off AdvanceTracwith RSC
If the vehicle is stuck in snow, mud or sand, and seems to lose engine
power, switching off certain features of the AdvanceTracwith RSC
system may be beneficial b

Page 401 of 454

FORD SUPER DUTY 2012 3.G User Guide On-board diagnostics (OBD-II)
Your vehicle is equipped with a computer that monitors the engine’s
emission control system. This system is commonly known as the
on-board diagnostics system (OBD-II).

Page 402 of 454

FORD SUPER DUTY 2012 3.G User Guide If the service engine soonindicator is on or the bulb does not
work, the vehicle may need to be serviced. Refer toOn-board
diagnostics (OBD-II)in this chapter.
If the vehicle’s engine or transmissio

Page 448 of 454

FORD SUPER DUTY 2012 3.G User Guide A
Accessory delay ........................107
AdvanceTrac ..............................279
Airbag supplemental restraint
system ........................184, 188, 190
and child safety seats ..........

Page 450 of 454

FORD SUPER DUTY 2012 3.G User Guide checking and adding ..............379
dipstick ....................................379
filter, specifications ........380, 413
recommendations ...................380
refill capacities ................

Page 451 of 454

FORD SUPER DUTY 2012 3.G User Guide Inspection/maintenance (I/M)
testing ........................................401
Instrument panel
cleaning ...........................369–370
cluster ........................................14
light
Page:   < prev 1-10 11-20