seats FORD TRANSIT CONNECT 2016 2.G Quick Reference Guide

*if equipped
HEATED FRONT SEATS*
The front heated seat controls are on the center console
near the gearshift lever. Rotate the dial to select your
preferred heat mode.
DUAL-ZONE TEMPERATURE CONTROLS
You can operate the temperature with one control, called
single zone, or two, called dual zone where both driver and
front passenger can select independent temperatures using
their own rotary dials.
To Operate the Dual Zone
Use the rotary control on the passenger side. Single zone
automatically shuts off. You can now adjust the driver side
and passenger side temperatures independently.
To Return Back to Single Zone
Press and hold the AUTO button for 2–4 seconds.
The passenger’s temperature switches to the driver’s
temperature setting.
12
COMFORT
SELECTSHIFT AUTOMATIC®
TRANSMISSION*
Your SelectShift Automatic
transmission gives you the ability
to manually change gears.
To use SelectShift, move the gearshift
lever into sport (S). Use the + or –
buttons on the side of your gearshift
lever to manually change gears.
» Press the (+ ) button to upshift.
» Press the (– ) button to downshift.
NOTE Once you are in sport (S),
your vehicle remains in this mode
until you return the gearshift
lever back to drive (D).
FUNCTION
13
REAR CLIMATE
CONTROLS
Set the temperature, air
direction and fan speed for
your rear passengers.
PANORAMIC FIXED
GLASS VISTA ROOF®*
The fixed glass roof includes a power sunshade that opens
and closes at the touch of a button.
To open, fully press and release the front of the control to
open the sunshade. To close, fully press and release the rear
of the control to close the sunshade.
*if equipped
REAR VIEW CAMERA*
The feature provides a video image of
the area behind the vehicle. The display
automatically appears when the vehicle
is in reverse (R) and uses green, yellow
and red guides to alert you of your
proximity to objects.
FRONT AND REAR PARKING AID*
Turn on automatically when you move the transmission selector lever to reverse (R)
or drive (D) or sport (S) and your vehicle is moving at a speed of less than 3 mph
(5 km/h). Audible warnings sound when large objects are within the sensor coverage
areas of either bumper.
» The system emits a high-pitched tone from the front audio system speakers
when large objects are within the sensor coverage area of your vehicle’s front
bumper. Moving your vehicle closer to a large object increases the audible
warning repeat rate.
» The system emits a lower-pitched tone from the rear audio system speakers
when large objects are within the sensor coverage area of your vehicle’s rear
bumper. Moving your vehicle closer to a large object increases the audible
warning repeat rate.
» See the Parking Aids chapter in your Owner’s Manual for complete information
on your vehicle’s sensing systems.
NOTE Visibility aids do not replace the need to watch where the vehicle is moving.
Refer to your Owner’s Manual for safety information, more details and limitations.

1415


Front Rear
CONVENIENCE
1
2
5
6
3
4
7
8
9
10
11
FIVE PASSENGER SECOND-ROW

SEAT VERSATILITY
Fold seats in half, prop them up or remove them entirely.
Here’s how to do it:
Fold One or Both Rear Seats
1. Make sure the head restraints are in their lowest position.
2. Pull the strap on the side of the seatback.
3. Fold the seatback forward.
4. The seat folds flat.
NOTE If you can see the red on the pull strap, then the
seat is not latched. Push down on the seat until the red flag
disappears. When you cannot see the red flag, then you
know that the seat is in its latched and locked position.
To Prop One or Both Seats
5. Pull the strap on the rear of the seatback.
6. Push down on the yellow lever and then
push the folded seat up and forward.
7. Lift the support rod.
8. Connect the support rod to the seat frame to
prevent the seat from falling backward.
To Remove the Seats
9. Pull the strap on the rear of the seatback
and push the seat forward.
NOTE If you can see the red on the pull strap, then the
seat is not latched. Push down on the seat until the red
flag disappears. When you cannot see the red flag,
then you know that the seat is in its latched and
locked position.
10. Push down on the yellow locking lever
and rock the seat to remove.
11. Lift the seat to remove.

1617


CONVENIENCE (cont.)
1
1
2
3
5
4
2
2
3
5
4
You can fold the third-row seats down to create a flat-loading cargo floor. For bench seats:
1. Make sure the seats are in the fully rearward
position, and fully lower the head restraints.
2. Pull the strap on the rear of the seat cushion.
3. Fold the seat cushion forward.
4. Pull the strap on the rear of the seatback.
5. Fold the seatback forward.
For third-row bucket seats:
1. Make sure the seats are in the fully rearward
position, and fully lower the head restraints.
2. Pull the handle on the side of the
seatback. Note: You can also use this handle to recline the seatback.
3. Fold the seatback forward.
4. Pull the strap on the rear of the seatback.
5. Move the seat forward to
the lowered position.
Create a flat-loading cargo floor by folding the
carpeted cover forward over both rows.
SIX AND SEVEN PASSENGER SEAT
VERSATILITY
To fold both second- and third-row seats in half, drop the
second-row seats into the floorboards and create a wide-open
flat-loading floor in your cargo area.
Here’s how to do it:
To Fold the Second Row Seats
1. Make sure the head restraints are in their lowest position.
2. Pull the strap.
3. Fold the seatback forward. When folding the larger,
60% seat, make sure you push down in the center of
the seat to make sure that the seat latches lock.
4. Pull the large strap on the rear of the seatback.
5. Move the seat forward to the lowered position.
As before in Step 3, when folding the larger, 60%
seat, make sure you push down in the center of the
seat to make sure that the seat latches lock.
NOTE When the seat locks into its lowered position, it sounds
a distinct click. If you can see the red on the pull strap, then the
seat is not latched. Push down on the seat until the red flag
disappears. When you cannot see the red flag, then you
know that the seat is in its latched and locked position.
NOTE When raising the seats back up into a seating position, make
sure the seat latches are locked by pressing down on the center of the
seat. If the seats are not in their downward-most, locked position,
you will not be able to raise the seatbacks.