climate settings GENESIS G70 2020 Quick Reference Guide

Quick Reference Guide I 0403 I Quick Reference Guide
Easy Access Function (Driver’s Seat)
Entering the vehicle
The driver’s seat and steering wheel will move back to its original
position when the Engine Start/Stop button is in the OFF position
and the driver’s door is closed with the smart key in possession.
Exiting the vehicle
The driver’s seat will move rearward and the steering wheel will
move upward when the driver’s door is opened and the Engine
Start/Stop button is in the OFF position with the gear in P (Park).
NOTE: The driver’s seat may not move rearward if there is not
enough space between the driver’s seat and the rear seat.
You can activate/deactivate this function from the User Settings
mode in the cluster LCD display:
Seat Easy Access:
Convenience > Seat Easy Access > Off/Normal/Extended
Steering Easy Access:
Convenience > Steering Easy Access > On/Off
Storing 1. Adjust the driver’s seat, outside
rearview mirrors, steering wheel,
instrument panel illumination and
head up display.
2. Press the SET button. The
system will beep once.
3. Press one of the memory buttons
(1 or 2) within 5 seconds.
The system will beep twice.
Recalling Press the desired memory button
(1 or 2). The system will beep once.
SET1
2
DRIVER POSITION MEMORY SYSTEM
NOTE: Transmission must be in P(Park).
NOTE: For resetting, please see
Owner’s Manual for procedure.
CLIMATE CONTROL SYSTEM SEAT
If you want to turn it off immediately, press and hold the button.
Each time you push the button, the setting is changed as follows:
OFFHIGHMEDIUMLOW
– Heat – Air Ventilation
CLIMATE
CLIMATE
CLIMATE
CLIMATE
OCCUPANT CLASSIFICATION SYSTEM (OCS)
Your vehicle is equipped with an
Occupant Classification System
(OCS) in the front passenger's
seat that detects whether the
passenger air bag system should
be activated or deactivated.
The following items may affect the OCS operation:
• Car seat accessories such as thick blankets and cushions which
cover up the car seat surface
• Placing materials such as water bottles on the seat
• Using electronic devices such as laptops and satellite radios which
use inverter chargers
• Wet towels or liquid that has been spilled on the seat. Make sure
the seat has been completely dried before driving the vehicle
FEATURES AND CONTROLS
GENESIS G70

Quick Reference Guide I 3231 I Quick Reference Guide
The Driver Attention Warning (DAW) system is designed as a safety
feature to help reduce drowsy or inattentive driving.
• To adjust the Driver Attention Alert sensitivity,
go to: User Settings > Driving Assist > Driver
Attention Warning > Normal or High in the
instrument cluster.
OFF - Driver Attention Warning system is
deactivated.
NORMAL - Driver Attention Warning system
alerts the driver of his/her fatigue level or
inattentive driving practices.
HIGH - Driver Attention Warning alerts the driver
of his/her fatigue level or inattentive driving
practices faster than Normal mode.
The Driver Attention Warning system is operable,
when driving speed is above 40 mph.
DRIVER ATTENTION WARNING (DAW)SHIFT BY WIRE (Electronic type shifter)
P (Park)
Always stop completely before
shifting into P (Park). To shift the
gear from R (Reverse), N (Neutral),
D (Drive) or Manual mode to P
(Park), press the [P] button while
depressing the brake pedal.
R (Reverse) / N (Neutral) / D
(Drive)
To select gear, press the
[UNLOCK] button while
depressing the brake pedal and
then move the shift lever forward (R
side) or backward (D side).
Paddle Shifter (Manual Shift Mode)
Press (-) to
downshift
Press (+) to
upshiftThe Paddle shifter is available
when the shift lever is in the D
position.
Press the [+] or [-] paddle shifter
once to shift up or down one gear.
Scan to view a video of: Shift by Wire
Scan to view a video of: Driver Attention Warning
ELECTRONIC STABILITY CONTROL (ESC)CLIMATE
The ESC system is an electronic
system designed to help the driver
maintain vehicle control under
adverse conditions.
Press to turn ESC on or off.
DRIVING
GENESIS G70

Quick Reference Guide I 3635 I Quick Reference Guide
FORWARD COLLISION-AVOIDANCE ASSIST (FCA)
The Forward Collision Avoidance (FCA)
system is designed to help detect and
monitor the vehicle ahead and warn
the driver if a collision is imminent. On
vehicles equipped with both camera
and radar sensor, pedestrian detection
is also available.
Early: This setting maximizes the amount of distance between the
vehicle or pedestrian ahead before the initial warning occurs.
Normal: This setting allows for a nominal amount of distance between
the vehicle or pedestrian ahead before the initial warning occurs.
Late: This setting reduces the amount of distance between the
vehicle or pedestrian ahead before the initial warning occurs.
The BCW (Blind-
Spot Collision
Warning)
system uses
radar sensors to
alert the driver
while driving.
It senses the rear
side territory of the vehicle and
provides information to the driver.
1 Blind-Spot Collision Warning
2 Lane change assist
3 Rear Cross-Traffic Collision
Warning (RCCW)
The BCW system will activate once vehicle speed exceeds 20 mph.
The The RCCW (Rear Cross-Traffic Collision Warning) alert will activate,
if vehicle is in reverse at speeds below 6 mph and BCW is activated.
BLIND-SPOT COLLISION WARNING (BCW)
• To turn the BCW on, press the BCW button. (indicator illuminated)
• To turn the BCW off, press the BCW button again.
1
2
3
Scan to view a video of: Rear Cross Traffic Collision Warning (RCCW)
NOTE: The RCCW system will only acticvate on the first reverse application
from park.
Please refer to your Owner’s Manual for further information.
REAR VIEW MONITOR
The rearview camera will activate when
the engine is running and the shift lever
is in the R (Reverse) position.Rearview display
- In the dark or at night.
- When it is raining, or when water droplets are on the camera.
- When the sun or the beam of headlights are shining into the camera lens.
Use care to keep the camera lens clean and avoid applying any type
of solvents, car wax, or window cleaners to the camera lens.
If the lens becomes dirty, wipe the lens with a clean, soft cloth.
NOTE: Rearview display is selectable,
see Owner’s Manual for further details.
The image displayed on the screen may
become difficult to see under the
following conditions:
To operate the system, select the FCA (Forward Collision Avoidance
Assist) sub menu in the LCD cluster display under User Settings.
Please refer to your Owner’s Manual for further information.
PARKING ASSIST SYSTEM (PAS)
The parking assist system assists
the driver during movement of the
vehicle by chiming if any object is
sensed within the distance of 3.3 ft
in front and 4 ft behind the vehicle.
Press button to turn ON/OFF:
ON – indicator light on
OFF – indicator light off
If the PAS is OFF, the system will
turn ON automatically when the
shift lever is in R (reverse).
The system will automatically turn
OFF when vehicle is driven forward
at speed above 6 mph.
NOTE: Front parking sensor
will not operate if the PAS is
OFF.
CLIMATE
GENESIS G70
DRIVING