brake sensor GENESIS G80 2019 Quick Reference Guide

Quick Reference Guide I 1817 I Quick Reference Guide
SMART CRUISE CONTROL
Setting Vehicle Distance
The vehicle to vehicle distance will
automatically activate when you set
the cruise speed.
This system assists you in setting the
distance from the vehicle ahead and
will maintain the selected distance
without depressing the accelerator or
the brake pedal.
Each time the vehicle distance set
button is pressed, the vehicle to
vehicle distance changes as follows:
The cruise control system allows
you to program the vehicle to
maintain a constant speed without
holding the accelerator pedal.
1 To turn On/Off cruise control.
2 Toggle switch UP to Resume or
Increase the cruise control speed.
3 Toggle switch DOWN to Set or
Decrease the cruise control speed.
4 To Cancel the Cruise Control.
2
3
1
4
Distance 2
Distance 3Distance 4(starting distance)
Distance 1
Setting Cruise Control
1. Press the “CRUISE” button 1 to turn on Cruise Control. The icon
will illuminate in the instrument cluster.
2. Toggle “-SET” switch 3 DOWN to set cruising speed.
Adjusting the vehicle speed
1. Toggle “+RES” switch 2 UP to increase cruising speed.
2. Toggle “-SET” switch 3 DOWN to decrease cruising speed.
NOTE: Quick toggle up/down will change speed by 1 mph.
Holding switch up/down will change speed by 5 mph.
To Cancel Cruise Control
Press the “CANCEL” button 4 or depress the brake pedal.
The Blind-Spot
Collision Warning
(BSW) uses a
radar sensor
when in Reverse
gear to alert the
driver of
oncoming
vehicle(s).
1 Blind spot detection
2 Lane change assist
3 Rear cross traffic alert
The BSW system will activate once the vehicle speed exceeds 20 mph.
The rear cross traffic alert will activate once the vehicle is in reverse at
speeds below 6 mph and BSW is activated.
BLIND-SPOT COLLISION WARNING (BSW)
• To turn BSW on, press the BSW button. (indicator illuminated)
• To turn BSW off, press the BSW button again.
1
2
3
Scan to view a video of: Blind-Spot Collision Warning (BSW)
DRIVING
GENESIS