Side GENESIS G90 2023 User Guide

3-18
Safety System
VIP seat mode switches (if
equipped)
ORS031025
ORS032154N
A : Control switch,
B : Armrest touchscreen,
L : Rear seat (Left),
R : Rear seat (Right)
You can automatically adjust the seat for
comfort or various in-vehicle activities.
1. Press
on the left side of the menu
from the armrest touchscreen.

[Seat adjustment screen is displayed.
2. Press and hold the appropriate mode
for your activity.

[Relax (REST) mode, Reading mode,
Return mode.
Relax (REST) Mode
The front and rear passenger seats are
automatically adjusted for comfort. Press
and hold button M on the rear door or
on the armrest touchscreen. Each seat is
adjusted automatically as below.

[Rear left seat
-6HDWEDFNWLOWVEDFNZDUG

3-21
03
Information
Return function switch for adjusting the
front passenger's seat do not operate in
the following situations when:

[The Engine Start/Stop button is in the
OFF position.

[A passenger occupies the front
passenger's seat.

[An item occupies the front passenger's
seat.

[The front passenger's door is open.

[The front passenger's seatbelt is
fastened.
Information

[The seat position changes to Return
mode while the button O is pressed.
The seat stops moving when the button
O is released.

[Operating the seat control switch while
the seat is being adjusted for Return
mode stops the seats from moving.
To adjust the seats again, use the
control switch and adjust manually.
Calf support adjustment (if equipped)
ORS031027
ORS032155N
Place your leg on the calf support and
adjust its angle to relax.

[Control switch (Type A)
Slide the calf support switch
diagonally upward or downward to
adjust the angle.

[Armrest touchscreen (Type B)
1. Press
from the left side menu
on the armrest touchscreen.
- Seat adjustment screen is
displayed.
2. Press the adjustment button on
the lower part of the rear seat to
be adjusted, and select the calf
support function.
3. Press the arrows of the desired
direction to adjust the angle of the
calf support.

3-22
Safety System
Information
Opening the door will return the calf
support to its original position.
CAUTION
Do not sit or place heavy objects on the
calf support. It may damage the system.
WARNING

[When lowering or raising the calf
support, be careful not to have your
hands or legs caught under the front
seats or other surrounding parts of
the calf support. Unexpected injuries
may occur.

[Do not allow children to adjust the
switch. Unexpected injuries may
occur.

[Make sure that the footrest and calf
support do not interfere with each
other while adjusting. The body parts
or objects may be damaged if it is
caught in the interference.
Rear seat massage function (if
equipped)
Use massage seat to relax after a long
drive, or when resting inside the vehicle.
ORS031033
Massage button
1. While the Engine Start/Stop button is
in ‘ON’ position, press the massage
button on the rear passenger seat
door to start the function.

[The light indicating massage
intensity level illuminates, and the
massage function will start.
2. Press the button again to set the
intensity level.

[Each time you press the button, the
intensity setting of the Massage is
changed as follows:
+LJK

3-23
03
ORS031137L
Setting the screen display
After pressing the massage button, you
can change the display method of each
massage mode from the armrest touch
screen. Follow the steps below.
1. Press 'Setup' from the home screen on
the armrest touchscreen, or press

from the left side menu.
2. Press 'Display'.
3. Select among 'Massage screen',
'Pop-up', or 'OFF' from the 'Massage
Notification/Status' menu.

[If Massage screen is selected,
pressing the Massage button will
move the armrest touchscreen
display to Massage mode tap.

[If 'Pop-up' is selected, pressing the
massage button will display the
massage mode pop-up screen on
the armrest touchscreen.
ORS031035L
Armrest touchscreen
1. Press from the left side menu on
the armrest touchscreen.

[Massage mode screen is displayed.
2. Select a desired mode.
M Whole-Body Energizing Mode
N Lumbar Therapy Mode
O Pelvis Balancing Mode
P Upper Body Refresh Mode
3. Select the desired duration.

[ Each time you press the button, the
intensity setting of the Massage it is
changed as follows:
+LJK

3-27
03
Rear seat head restraints
ORS031029
The rear seats are equipped with head
restraints in all the seating positions for
the passenger’s safety and comfort.
ORS031030
0DQXDODGMXVWPHQWLIHTXLSSHG

[To raise the head restraint:
1. Pull it up to the desired position M.

[To lower the head restraint:
1. Push and hold the release button
N on the head restraint support.
2. Lower the head restraint to the
desired position O.
3RZHUDGMXVWPHQWLIHTXLSSHG
ORS031031
ORS032032N

[Adjusting the head restraint forward
and rearward M
- Adjustment switch (Type A)
Slide the adjustment switch forward
or backward to adjust the head
restraint forward and rearward.
- Armrest touchscreen (Type B)
1. Press
from the left side menu
on the armrest touchscreen.
- Seat adjustment screen is
displayed.
2. Press the adjustment button on
the upper part of the seat you
want to adjust from the armrest
touchscreen, and then adjust
the head restraint forward and
rearward.

3-28
Safety System
WARNING
Do not remove the head restraint.
Removing the head restraint on your
own might damage the adjustment
motor connector. Have your vehicle
inspected by an authorized retailer
Genesis Branded products.

[Adjusting the height up and down N
- Adjustment switch (Type A)
Push down or pull up the head
restraint adjustment switch to
adjust the head restraint up and
down.
- Armrest touchscreen (Type B)
1. Press
from the left side menu
on the armrest touchscreen.
- Seat adjustment screen is
displayed.
2. Press the adjustment button on
the upper part of the seat you
want to adjust from the armrest
touchscreen, and then adjust the
head restraint up and down.
Wing-out head restraint adjustment
(if equipped)
ORS031036
While driving, the wing-out head
restraint supports the passenger’s head
from shaking. Hold both ends of the
wing-out head restraint with your hands,
and pull out or push in to adjust its
position.
Information
When the wing-out head restraint is not in
use, hold both ends of the head restraint
and pull out to return it to its original
position.

3-31
03
Pre-active Safety Seat (PSS) (if
equipped)
When Pre-active Safety Seat detects
a collision or hazardous situation, it
provides safety by repositioning the seat
as follows:

[Seatback (power passenger seat and
rear seat): Raises the seatback when
reclined.

[Seat cushion (power rear seat): If
the cushion height is low, raises the
cushion.
WARNING
Pre-active Safety Seat is a
supplementary device. The driver
should keep their eyes on the road and
verify that there are no obstructions
ahead. If there are no passengers or the
seatbelts are not fastened, the system
will not function.
System operation

[Pre-active Safety Seat limits
passenger’s movement and helps
decrease the chance of injury by
raising the seatback right before
collision to tighten the seatbelt.
The system may operate under the
following situations:
- The brake pedal was depressed
abruptly.
- The vehicle is difficult to control.
- Collision risk is considered high by
the vehicle distance sensor.
[Pre-active Safety Seat helps prevent
the passenger from leaning forward
or to the side by raising the seatback
during sudden braking or rapid
turning to tighten the seatbelt.
The system may operate under the
following situations:
- The upper body is leaned forward
due to sudden braking.
- The upper body is leaned to the side
due to rapid turning.
- Driving on a slippery icy road.
- There is high risk of a rollover.
System pause
If the passenger adjusts the seat
manually, the system stops immediately.
However, it restarts to operate after 5
seconds when the hazardous situation
continues.
System malfunction
If the Pre-active Safety Seat system does
not operate properly, have the vehicle
inspected by an authorized retailer of
Genesis Branded products.

3-34
Safety System
Rear seat warmers (if equipped)
ORS032042N
1. While the engine is on, press
button from the left side menu on the
armrest touchscreen.

[Climate screen is displayed.
2. Press
next to the seat which
requires heating, from the air
conditioning screen.

[Seat heater is turned on with strong
temperature level.
3. Press
to lower the temperature.
Press to raise the temperature
again.

[Press and hold
or to turn off
the seat heater, or press multiple
times until it turns off.

[Seat heater automatically turns off
once the temperature reaches the
limit, and turns on again when the
temperature drops.

[Press
multiple times to turn
on the seat heater when the seat
ventilator is on. (if equipped)
Information

[After a certain period of time, the
temperature level of the seat heater is
automatically lowered to prevent low
temperature burns.

[,IWKHHQJLQHLVWXUQHGRIIZKLOHWKH
seat heater is on, the seat heater will be
turned off after the engine is restarted.
Using rear seat heaters from front
seat
ORS032108N
ORS032043N
Rear seat heaters can be turned on/off
from the front seat.
1. Press REAR from the upper part of
the air conditioning display while the
engine is on.

[Rear seat air conditioning screen is
displayed.

3-37
03
Rear air ventilation seats
(if equipped)
ORS032044N
1. While the engine is on, press
button from the left side menu on the
armrest touchscreen.

[Climate screen is displayed.
2. Press
next to the seat which
requires ventilating, from the air
conditioning screen.

[Seat ventilator is turned on with
strong intensity level.
3. Press
to lower ventilation intensity.
Press to raise intensity again.

[Press and hold
or to turn
off the seat ventilator, or press
multiple times until it turns off.

[Seat ventilator automatically turns
off once the seat temperature falls
below a the certain temperature,
and turns on again when the
temperature rises.

[Press
multiple times to turn on
the seat ventilator when the seat
heater is on. (if equipped)
Using the rear seat ventilator from
the front seat (if equipped)
ORS032108N
ORS032045N
Rear seat ventilators can be turned on/
off from the front seat.
1. Press REAR from the upper part of
the air conditioning display while the
engine is on.

[Rear seat air conditioning screen is
displayed.

3-43
03
ORS031128
To release your seat belt:
Press the release button M in the locking
buckle.
When it is released, the belt should
automatically draw back into the
retractor. If this does not happen, check
the belt to be sure it is not twisted, then
try again.
Rear center seat belt (if equipped)
ORS031048L
1. Take out the buckle N, which is stored
between the seat/seatback cushions.
2. Insert the metal plate M into the
buckle N, until it clicks.
You can make sure its secure
fastening by pulling the seatbelt
webbing. The buckle with ‘CENTER’
mark should be used for the 3-point
seatbelt.
3. Restore the buckle between the seat/
seatback cushion after unfastening
the seatbelt.
Pre-tensioner seat belt
ORS031103
Your vehicle is equipped with driver’s and
front passenger’s and rear passengers
Pre-tensioner Seat Belts (Retractor
Pre-tensioner). The purpose of the pre-
tensioner is to make sure the seat belts
fit tightly against the occupant’s body
in certain frontal or side collision(s).
The pre-tensioner seat belts may be
activated in crashes where the frontal
or side collision(s) is severe enough,
together with the air bags.
When the vehicle stops suddenly, or if
the occupant tries to lean forward too
quickly, the seat belt retractor will lock
into position.
In certain frontal collisions, the pre-
tensioner will activate and pull the seat
belt into tighter contact against the
occupant’s body.
If the system senses excessive tension
on the driver or passenger’s seat belt
when the pre-tensioner system activates,
the load limiter inside the retractor
pre-tensioner will release some of the
pressure on the affected seat belt.