engine GENESIS G90 2023 User Guide

2-16
Vehicle Information, Consumer Information and Reporting Safety Defects
ENGINE NUMBER
ORS012022N
The engine number is stamped on the
engine block as shown in the drawing.
AIR CONDITIONER
COMPRESSOR LABEL
ORS011025L
A compressor label informs you the type
of compressor your vehicle is equipped
with such as model, supplier part
number, production number, refrigerant
M and refrigerant oil N.

3-13
03
Seat massage function (for driver’s
seat) (if equipped)
ORS031016
Use the massage function to relax after
a long drive, or when resting inside the
vehicle.
1. While the Engine Start/Stop button is
in ‘ON’ position, press the massage
button on the driver’s seat door to
start the function.

[The light indicating massage
intensity level illuminates.
2. Press the button again to set the
intensity level.

[Each time you press the button, the
intensity setting of the Massage it is
changed as follows:
+LJK

3-14
Safety System
Seatback pocket
ORS031015
The seatback pocket is provided on the
back of the front seatbacks.
CAUTION
Do not put heavy or sharp objects in the
seatback pockets. In an accident they
could come loose from the pocket and
injure occupants.
Rear Seats
WARNING
NEVER adjust the rear power seats
when a Child Restraint System is
installed in that seat.
WARNING
To prevent injury:

[Do not adjust your seat while
wearing your seat belt. Moving the
seat cushion forward may cause
strong pressure on your abdomen.

[Do not allow your hands or fingers to
get caught in the seat mechanisms
while the seat is moving.
NOTICE
To prevent damage to the seats:

[Always stop adjusting the seats when
the seat has been adjusted as far
forward or rearward as possible.

[Do not adjust the seats longer than
necessary when the engine is turned
off. This may result in unnecessary
drain of the battery.

[Do not operate two or more seats at
the same time. This may result in an
electrical malfunction.

3-19
03
NOTICE

[Do not press the Relax (REST) mode
switch again while operating the
seat positions for Relax (REST)
mode. It may abruptly stop the seat
movement.

[When you operate the seat control
switch while adjusting the seat
positions for the Relax (REST) mode,
it stops the automatic seat position
adjustment. In this case, manually
adjust the seat positions.

[Any items, which occupy the front
passenger's seat, may get damaged
while automatically adjusting the
seat positions for the Relax (REST)
mode. Do not put any items on the
front passenger's seat.
Information

[Relax (REST) mode switches for
adjusting the front passenger’s seat do
not operate in the following situations
when:
-The Engine Start/Stop button is in
the OFF position.
-A passenger occupies the front
passenger’s seat.
-An item occupies the front
passenger’s seat.
-The front passenger’s door is open.
-The front passenger’s seatbelt is
fastened.

[Relax (REST) mode for rear left seat
is unavailable under the following
circumstances when:
-The driver’s seat is positioned back
too far.
-The driver’s seatback is reclined
back too much.

[Operating range of the Relax (REST)
mode of the rear left seat may vary
depending on the position of the
driver’s seat.
Information

[The seat position changes to Relax
(REST) mode while the button M is
pressed. The seat stops moving when
the button M is released.

[The forward and rearward position for
the rear seats are adjusted based on its
current position. The starting position
may differ.

[Operating the seat control switch while
the seat is being adjusted for Relax
(REST) mode stops the seats from
moving.
To adjust the seats again, use the
control switch and adjust manually.

3-21
03
Information
Return function switch for adjusting the
front passenger's seat do not operate in
the following situations when:

[The Engine Start/Stop button is in the
OFF position.

[A passenger occupies the front
passenger's seat.

[An item occupies the front passenger's
seat.

[The front passenger's door is open.

[The front passenger's seatbelt is
fastened.
Information

[The seat position changes to Return
mode while the button O is pressed.
The seat stops moving when the button
O is released.

[Operating the seat control switch while
the seat is being adjusted for Return
mode stops the seats from moving.
To adjust the seats again, use the
control switch and adjust manually.
Calf support adjustment (if equipped)
ORS031027
ORS032155N
Place your leg on the calf support and
adjust its angle to relax.

[Control switch (Type A)
Slide the calf support switch
diagonally upward or downward to
adjust the angle.

[Armrest touchscreen (Type B)
1. Press
from the left side menu
on the armrest touchscreen.
- Seat adjustment screen is
displayed.
2. Press the adjustment button on
the lower part of the rear seat to
be adjusted, and select the calf
support function.
3. Press the arrows of the desired
direction to adjust the angle of the
calf support.

3-22
Safety System
Information
Opening the door will return the calf
support to its original position.
CAUTION
Do not sit or place heavy objects on the
calf support. It may damage the system.
WARNING

[When lowering or raising the calf
support, be careful not to have your
hands or legs caught under the front
seats or other surrounding parts of
the calf support. Unexpected injuries
may occur.

[Do not allow children to adjust the
switch. Unexpected injuries may
occur.

[Make sure that the footrest and calf
support do not interfere with each
other while adjusting. The body parts
or objects may be damaged if it is
caught in the interference.
Rear seat massage function (if
equipped)
Use massage seat to relax after a long
drive, or when resting inside the vehicle.
ORS031033
Massage button
1. While the Engine Start/Stop button is
in ‘ON’ position, press the massage
button on the rear passenger seat
door to start the function.

[The light indicating massage
intensity level illuminates, and the
massage function will start.
2. Press the button again to set the
intensity level.

[Each time you press the button, the
intensity setting of the Massage is
changed as follows:
+LJK

3-30
Safety System
Carrying long/narrow cargo
ORS031038
Additional cargo space is provided to
accommodate long/narrow cargo (skis,
poles, etc.) not able to fit properly in the
trunk when closed.
1. Pull the armrest down.
2. Pull the cover down while pushing the
release lever down.
NOTICE

[Be careful when loading cargo
through the rear passenger seats
to prevent damage to the vehicle
interior.

[When both the armrest and the
panel, which located between the
rear seatback and the trunk for long-
item storage, are folded down, put
back the panel first, before folding
back the arm rest. If not, the panel
knobs and the armrest knobs may
interfere with each other and get
damaged.
CAUTION

[Make sure the engine is off, the
vehicle is shifted to P (Park) and the
parking brake is applied whenever
loading or unloading cargo. The
vehicle may move if the shift lever
is inadvertently moved to another
position.

[When cargo is loaded through the
rear passenger seats, ensure the
cargo is properly secured to prevent
it from moving while driving.
WARNING
Cargo should always be secured to
prevent it from being thrown about the
vehicle in a collision and causing injury
to the vehicle occupants. Do not place
objects in the rear seats, since they
cannot be properly secured and may hit
the front seat occupants in a collision.

3-33
03
Front seat warmers
ORS031040
While the engine is on, press the seat
heater button on the center console to
select the temperature level.

[Temperature level can be adjusted to
strong, medium, or weak. Pressing
the button each time will change the
temperature in turn from strong, to
medium, weak, and off.

[Press and hold the seat heater button
to turn it off.

[Auto. Controls That Use Climate
Control Settings (for driver’s seat)
The seat warmer automatically
controls the seat temperature
depending on the ambient
temperature when the engine is
running.
To use this function, it must be
enabled from the Settings menu in the
infotainment system screen. Select:
-6HWXS

3-34
Safety System
Rear seat warmers (if equipped)
ORS032042N
1. While the engine is on, press
button from the left side menu on the
armrest touchscreen.

[Climate screen is displayed.
2. Press
next to the seat which
requires heating, from the air
conditioning screen.

[Seat heater is turned on with strong
temperature level.
3. Press
to lower the temperature.
Press to raise the temperature
again.

[Press and hold
or to turn off
the seat heater, or press multiple
times until it turns off.

[Seat heater automatically turns off
once the temperature reaches the
limit, and turns on again when the
temperature drops.

[Press
multiple times to turn
on the seat heater when the seat
ventilator is on. (if equipped)
Information

[After a certain period of time, the
temperature level of the seat heater is
automatically lowered to prevent low
temperature burns.

[,IWKHHQJLQHLVWXUQHGRIIZKLOHWKH
seat heater is on, the seat heater will be
turned off after the engine is restarted.
Using rear seat heaters from front
seat
ORS032108N
ORS032043N
Rear seat heaters can be turned on/off
from the front seat.
1. Press REAR from the upper part of
the air conditioning display while the
engine is on.

[Rear seat air conditioning screen is
displayed.

3-36
Safety System
Front air ventilation seats (if
equipped)
ORS031041
While the engine is on, press the seat
ventilator button on the center console
to select the intensity level.

[Ventilation intensity level can be
adjusted to strong, medium, or weak.
Pressing the button each time will
change the intensity in turn from
strong, to medium, weak, and off.

[Press and hold the seat ventilator
button to turn it off.

[Auto. Controls That Use Climate
Control Settings (for driver’s seat)
The air ventilation seat automatically
controls the seat temperature
depending on the ambient
temperature when the engine is
running.
To use this function, it must be
enabled from the Settings menu in the
infotainment system screen. Select:
-6HWXS