seat adjustment GENESIS G90 2023 User Guide

3-17
03
Easy access switch (for passenger’s
Seat) (if equipped)
ORS032109N
ORS032023N
9HKLFOHVHTXLSSHGZLWK,QWHJUDWHG
Memory System
The seats can automatically move
backward by opening the rear door with
the rear seats moved forward.
1. Press
on the left side of the menu
from the armrest touchscreen.

[Seat adjustment screen is displayed.
2. Touch either the right, or left seat
adjustment button M on the rear seat.
3. Press the DOOR button.

[The indicator light on the button
illuminates and easy access
function for entrance/exit is
enabled.
VIP seat (if equipped)
ORS032024N
The rear seat occupant can adjust the
VIP seat and front passenger seats for
VIP convenience. The front and rear
passenger seats are also adjustable
through the armrest touchscreen.
Information

[Convenience features of the rear left
seat is not available under the following
circumstances when:
-The driver’s seat is positioned back
too far.
-The driver’s seatback is reclined
back too much.

[Operating range of the convenience
features of the rear left seat may
vary depending on the position of the
driver’s seat.

3-18
Safety System
VIP seat mode switches (if
equipped)
ORS031025
ORS032154N
A : Control switch,
B : Armrest touchscreen,
L : Rear seat (Left),
R : Rear seat (Right)
You can automatically adjust the seat for
comfort or various in-vehicle activities.
1. Press
on the left side of the menu
from the armrest touchscreen.

[Seat adjustment screen is displayed.
2. Press and hold the appropriate mode
for your activity.

[Relax (REST) mode, Reading mode,
Return mode.
Relax (REST) Mode
The front and rear passenger seats are
automatically adjusted for comfort. Press
and hold button M on the rear door or
on the armrest touchscreen. Each seat is
adjusted automatically as below.

[Rear left seat
-6HDWEDFNWLOWVEDFNZDUG

3-19
03
NOTICE

[Do not press the Relax (REST) mode
switch again while operating the
seat positions for Relax (REST)
mode. It may abruptly stop the seat
movement.

[When you operate the seat control
switch while adjusting the seat
positions for the Relax (REST) mode,
it stops the automatic seat position
adjustment. In this case, manually
adjust the seat positions.

[Any items, which occupy the front
passenger's seat, may get damaged
while automatically adjusting the
seat positions for the Relax (REST)
mode. Do not put any items on the
front passenger's seat.
Information

[Relax (REST) mode switches for
adjusting the front passenger’s seat do
not operate in the following situations
when:
-The Engine Start/Stop button is in
the OFF position.
-A passenger occupies the front
passenger’s seat.
-An item occupies the front
passenger’s seat.
-The front passenger’s door is open.
-The front passenger’s seatbelt is
fastened.

[Relax (REST) mode for rear left seat
is unavailable under the following
circumstances when:
-The driver’s seat is positioned back
too far.
-The driver’s seatback is reclined
back too much.

[Operating range of the Relax (REST)
mode of the rear left seat may vary
depending on the position of the
driver’s seat.
Information

[The seat position changes to Relax
(REST) mode while the button M is
pressed. The seat stops moving when
the button M is released.

[The forward and rearward position for
the rear seats are adjusted based on its
current position. The starting position
may differ.

[Operating the seat control switch while
the seat is being adjusted for Relax
(REST) mode stops the seats from
moving.
To adjust the seats again, use the
control switch and adjust manually.

3-21
03
Information
Return function switch for adjusting the
front passenger's seat do not operate in
the following situations when:

[The Engine Start/Stop button is in the
OFF position.

[A passenger occupies the front
passenger's seat.

[An item occupies the front passenger's
seat.

[The front passenger's door is open.

[The front passenger's seatbelt is
fastened.
Information

[The seat position changes to Return
mode while the button O is pressed.
The seat stops moving when the button
O is released.

[Operating the seat control switch while
the seat is being adjusted for Return
mode stops the seats from moving.
To adjust the seats again, use the
control switch and adjust manually.
Calf support adjustment (if equipped)
ORS031027
ORS032155N
Place your leg on the calf support and
adjust its angle to relax.

[Control switch (Type A)
Slide the calf support switch
diagonally upward or downward to
adjust the angle.

[Armrest touchscreen (Type B)
1. Press
from the left side menu
on the armrest touchscreen.
- Seat adjustment screen is
displayed.
2. Press the adjustment button on
the lower part of the rear seat to
be adjusted, and select the calf
support function.
3. Press the arrows of the desired
direction to adjust the angle of the
calf support.

3-25
03
Front seat head restraints
ORS031141L
The driver’s and front passenger’s seats
are equipped with adjustable head
restraints for the passengers safety and
comfort.
ORS031013
Adjusting the height up and down
1. Push the control switch up to raise or
down to lower the head restraint.
2. Release the switch once the head
restraint reaches the desired position.
ORS031012
Forward and rearward adjustment
1. Push the control switch forward
orrearward to move the head restraint.
2. Release the switch once the head
restraint reaches the desired position.
NOTICE
ORS031131
If you recline the seatback towards the
front with the head restraint and seat
cushion raised, the head restraint may
come in contact with the sunvisor or
other parts of the vehicle.

3-26
Safety System
ORS031093
Removal/Reinstall
To remove the head restraint:
1. Recline the seatback O with the
seatback angle switch M.
2. Raise the head restraint as far as it can
go N.
3. Insert a thin-pointed tool into the
head restraint adjustment pole P and
then remove the head restraint Q.
WARNING
NEVER allow anyone to travel in a seat
with the head restraint removed.
ORS031014
To reinstall the head restraint:
1. Recline the seatback.
2. Push the head restraint height control
switch M up as far as it can go.
3. Put the head restraint poles into the
holes N.
4. Adjust the head restraint to the
appropriate height O.
5. Recline the seatback Q using the
seatback angle switch P.
WARNING
Always make sure the head restraint
locks into position after reinstalling and
adjusting it properly.

3-27
03
Rear seat head restraints
ORS031029
The rear seats are equipped with head
restraints in all the seating positions for
the passenger’s safety and comfort.
ORS031030
0DQXDODGMXVWPHQWLIHTXLSSHG

[To raise the head restraint:
1. Pull it up to the desired position M.

[To lower the head restraint:
1. Push and hold the release button
N on the head restraint support.
2. Lower the head restraint to the
desired position O.
3RZHUDGMXVWPHQWLIHTXLSSHG
ORS031031
ORS032032N

[Adjusting the head restraint forward
and rearward M
- Adjustment switch (Type A)
Slide the adjustment switch forward
or backward to adjust the head
restraint forward and rearward.
- Armrest touchscreen (Type B)
1. Press
from the left side menu
on the armrest touchscreen.
- Seat adjustment screen is
displayed.
2. Press the adjustment button on
the upper part of the seat you
want to adjust from the armrest
touchscreen, and then adjust
the head restraint forward and
rearward.

3-28
Safety System
WARNING
Do not remove the head restraint.
Removing the head restraint on your
own might damage the adjustment
motor connector. Have your vehicle
inspected by an authorized retailer
Genesis Branded products.

[Adjusting the height up and down N
- Adjustment switch (Type A)
Push down or pull up the head
restraint adjustment switch to
adjust the head restraint up and
down.
- Armrest touchscreen (Type B)
1. Press
from the left side menu
on the armrest touchscreen.
- Seat adjustment screen is
displayed.
2. Press the adjustment button on
the upper part of the seat you
want to adjust from the armrest
touchscreen, and then adjust the
head restraint up and down.
Wing-out head restraint adjustment
(if equipped)
ORS031036
While driving, the wing-out head
restraint supports the passenger’s head
from shaking. Hold both ends of the
wing-out head restraint with your hands,
and pull out or push in to adjust its
position.
Information
When the wing-out head restraint is not in
use, hold both ends of the head restraint
and pull out to return it to its original
position.

3-42
Safety System
NOTICE
If you are not able to smoothly pull
enough of the seat belt out from the
retractor, firmly pull the seat belt out
and release it. After release, you will be
able to pull the belt out smoothly.
WARNING
ORS031127
Improperly positioned seat belts may
increase the risk of serious injury
in an accident. Take the following
precautions when adjusting the seat
belt:

[Position the lap portion of the seat
belt as low as possible across your
hips, not on your waist, so that it
fits snugly. This allows your strong
pelvic bones to absorb the force of
the crash, reducing the chance of
internal injuries.

[Position one arm under the shoulder
belt and the other over the belt, as
shown in the illustration.

[Always position the shoulder belt
anchor into the locked position at the
appropriate height.

[Never position the shoulder belt
across your neck or face.
Height adjustment
You can adjust the height of the shoulder
belt anchor to one of the four different
positions for maximum comfort and
safety.
The shoulder portion should be adjusted
so it lies across your chest and midway
over your shoulder nearest the door, not
over your neck.
ORS031047
Front seat:
To adjust the height of the seat belt
anchor, lower or raise the height adjuster
into an appropriate position.
To raise the height adjuster, pull it up
M. To lower it, push it down O while
pressing the height adjuster button N.
Release the button to lock the anchor
into position. Try sliding the height
adjuster to make sure that it has lock into
position.

4-30
Instrument Cluster, Armrest touchscreen, Infotainment system
Setting Touchscreen
Press Setup from the main menu of the
touchscreen.
Settings for other functions can be
accessed on the left side of the Setup
(
) menu.
• Fragrance (if equipped): Select the
fragrance for pleasant riding. For more
details, refer to “Built in diffuser”
section in chapter 5.
• Seat (if equipped): Select different
seat modes for rear right seat
occupant. For more details, refer to
“Seats” section in chapter 3.
• Rear Wireless Charging (if equipped):
Turn on/off the wireless cellphone
charge function for rear seat
occupants. For more details, refer
to “Wireless smart phone charging
system” section in chapter 5.
• Display: Change the screensaver
timeout setting and screen display
method while using massage buttons
from the rear door.
-Screen Time-out: 15 sec, 30 sec, 1
Min, 2 Min (default),5 Min, 10 Min
-Massage Notification/Status
(if equipped): Massage Screen
(default), Pop-up, OFF
• Graphic Themes: Select the display
theme of the screen.
-Use Audio System's Display Theme
(default)
-User-Set Time : Select between
white and black theme, or set the
screen to change automatically to
white theme during the day and
black during the night. • Illumination: Select the brightness of
the screen.
-Adjust Brightness Automatically:
The brightness of the display is
automatically adjusted depending
on outside brightness.
-Manual adjustment: Manually adjust
the brightness to desired level.
Brightness is maintained at the
adjusted level.
-Reset: Returns all settings to
default.
• Blue Light Filter: Select whether to
turn the blue light filter on or off, and
set the color when the blue light lifter
is on.
-Use Blue light filter/color
adjustment: Select or deselect
whether to use the blue light filter,
and adjusts the display color when
the blue light filter is on.
-Auto: Adjusted blue light filter is
turned on automatically when the
surrounding area is dark.
-User-Set Time: Adjusted blue light
filter turns on at the time set.
004_RS4_HMA.indd 4-302022-04-06  3:02:36