cruise control GENESIS G90 2023 Owner's Guide

7-109
07
ORS071076
Driving to one side within lane
When vehicle speed is above 40 mph (60
km/h), if a detected vehicle around you is
driving at a close distance, your vehicle
will control steering in the opposite
direction of the vehicle to assist in safe
driving. If there a detected vehicle in
both sides of the lane that are driving
close to you, the function will not veer to
the opposite side of the lane.
+LJKZD\'ULYLQJ$VVLVWVWDQGE\
When Smart Cruise Control is
temporarily canceled while Highway
Driving Assist is operating, Highway
Driving Assist will be in the standby state.
At this time, Lane Following Assist will
operate properly.
Information

['ULYLQJ6SHHG/LPLWKHOSV\RXGULYH
EHORZPSKNPK$WWKLVWLPH
the vehicle decelerates due to the
vehicle ahead. After the vehicle has
decelerated, it cannot automatically
accelerate.

['ULYLQJ6SHHG/LPLWZLOOFDQFHOLQWKH
following circumstances:
-When the driver grabs the steering
wheel again
-When the driver turns on Lane
)ROORZLQJ$VVLVWE\SUHVVLQJWKH/DQH
Driving Assist button
-When +, -,
switch or button is
RSHUDWHGRUWKHDFFHOHUDWRUSHGDORU
WKHEUDNHSHGDOLVGHSUHVVHG
Highway Lane Change Assist
'LVSOD\LQJRSHUDWLQJVWDWXV
You can see the status of the Highway Lane
Change Assist operation in the Driving
Assist view on the cluster. Refer to “View
Modes” section in chapter 4.
Highway Lane Change Assist function
will be displayed as below depending on
the status of the function.