belt GMC ACADIA 2007 Get To Know Guide

7
Manual Lumbar Support Adjustment
(if equipped)

To increase the amount of lumbar
support, ratchet up repeatedly the lever
located on the inboard side of the seat
back. To decrease support, ratchet the
lever down repeatedly.

Power Seat Adjustment (if equipped)

Use the horizontal control (A) on the
outboard side of the seat cushion to
move the seat forward/rearward and, on
the driver’s seat only, up/down as well
as raise/lower the front or rear of the
seat cushion.

Power Seatback Recline Adjustment
(if equipped)

Use the vertical control (B) on the
outboard side of the seat cushion to
recline/raise the seatback.

Power Lumbar Support Adjustment
(if equipped)

Use the control pad (C) on the outboard
side of the seat cushion to increase/
decrease lumbar support and to
raise/lower the height of the support.

See Section 1 of your Owner Manual.

Child Restraints (LATCH)

Your vehicle is equipped with LATCH
anchors, and may have top tethers for
use with a LATCH compatible child
restraint. The LATCH anchors are
located in the 2ndrow outboard seating
positions. If your child restraint is not
compatible with the LATCH system, you
may still use it by installing the child
restraint with the safety belt system.
Choose a child seat that is appropriate
for the child’s age and size (weight
and height).

See Section 1 of your Owner Manual.

Seat Adjustments
Manual Seat Height Adjustment

To raise the driver’s seat, ratchetup
repeatedlythe leverlocated on the front
outboard side of the seat cushion. To
lower the seat, ratchet the lever down
repeatedly .

Manual Seatback Recline Adjustment

Lift the lever located on the lower out
board side of the seatback and move
the seatback to the desired position;
then release the lever.

COMFORT

C
B
A
Power Seat controls

Acadia 2007 A 10/3/06 3:11 PM Page 7

9
3rdRow Seats
The 3rdrow 60/40 split bench seat
features folding seatbacks. Prior to folding a seatback, make sure all of theseatbelts are unbuckled, nothing is onthe 3rdrow seat, and the 2ndrow seatis not reclined.
Lift the lever (A) on the upperback out
board corner of the seatback until thehead restraint folds forward, and thenfold down the seatback.
To return the seatback to the upright
position, pull the seatback strap (B) from
the rear of the vehicle or lift up the seat
back from inside the vehicle. Pull on theseatback to make sure it is locked inplace. Lift up the head restraint to lock itin place.
See Section 1 of your Owner Manual.
The following heated front seat controls
are located on the center console infront of the shift lever:
(Heated Seat/Seatback):Press the
bottom button to turn on the heated seatcushion and seatback.
(Heated Seatback):Press the top
button to turn on the heated seatback.
Heated Seat Controls
(if equipped)
Memory settings can be programmed for
the position of the driver’s seat and outside mirrors. The memory buttons are
located on the driver’s door.
To save memory settings:
1. Adjust the driver’s seat and outside
mirrors to the desired position.
2. Press and hold button 1 until two
beeps sound.
Repeat these steps using button 2 for a
second driver.
To recall the memory settings, press
button 1 or 2 with the vehicle in Park.
The memory seat setting also can beprogrammed in the DIC to be recalledautomatically when using the RemoteKeyless Entry transmitter.
Easy Exit Seat
With the vehicle in Park, press the
(Easy Exit Seat) button to recall the exit
position for the driver’s seat. The easy
exit seat setting also can be pro
grammed in the DIC to be recalled whenremoving the key from the ignition.
See Section 1 of your Owner Manual.
Memory Seats and Mirrors
(if equipped)
Continue to press the desired button to
cycle through the temperature settingsof High (three indicator lights), Medium(two indicator lights), Low (one indicator
light), and Off (no indicator lights).
See Section 1 of your Owner Manual.
A
B
Acadia 2007 A 10/3/06 3:07 PM Page 9