window GMC CANYON 2016 Get To Know Guide

2
Instrument Panel
Cruise Control/
Forward Collision Alert Buttons
FTurn Signal Lever Driver Information
Center Controls/Voice Recognition Buttons Windshield
Wipers Lever
4WD
Control
F
Driver
Information Center
Instrument Panel
Illumination Control/
Exterior Lamp Control
Power Mirror
Control
F/
Window Switches Tilt/Telescoping
Steering Wheel Lever
Low Fuel
Traction Control Off
Lane Departure Warning

Brake System
Cruise Control Set
StabiliTrak Active
StabiliTrak Off
Security
Tow/Haul Mode


Forward Collision Alert
Lights On Reminder
Airbag Readiness
Check Engine
Antilock Brake System
Symbols

4
Unlock
Press to unlock the driver’s door.
Press again to unlock all doors.
Lock
Press to lock all doors.
Vehicle Locator/Panic Alarm
Press and release to locate your vehicle.
Press and hold to activate the alarm.
Remote Keyless Entry Transmitter (Key Fob)F
Tilt/TelescopingF Steering Wheel
Head Restraints
With the vehicle in Park, push down the lever
(A) on the left side of the steering column to
adjust the position of the steering wheel. The
steering wheel can then be moved up or
down and in or out
F. Pull up the lever to lock
the steering wheel in place.
See Instruments and Controls in your Owner Manual.
Remote Vehicle StartF
Press and release the Lock button and
then press and hold the button until
the turn signal lamps flash to start the
engine from outside the vehicle. After
entering the vehicle, turn on the ignition.
Note: To change the remote lock, unlock, and
remote start settings, go to Remote Lock, Unlock,
Start in the Vehicle Settings menu.
See Keys, Doors and Windows in your Owner Manual.
Head Restraint Adjustment
To raise a front seat head restraint, pull it up.
To lower a front seat head restraint, press the button on top of the seatback and push
down the head restraint.
To fold a rear outboard head restraint (Crew Cab models only) for better visibility or
when folding the seatback, press the button on the side of the head restraint.
Extended Cab Seat Cushion Extension
The head restraint can be used as a seat cushion extension when
using a child seat.
1. To remove the passenger-side rear seat head restraint, press
the button on top of the seatback and pull up the head
restraint.
2. Insert the head restraint in the holes on the front of the
passenger-side rear seat cushion to use as a seat cushion
extension. The notch on the post faces outboard.
3. To remove the head restraint, press both buttons by the seat
cushion holes.
See Seats and Restraints in your Owner Manual.
A
F Optional equipment

12
Climate Controls
Automatic OperationF
1. Press AUTO.
2. Set the temperature.
The system automatically controls the fan speed, air delivery, air conditioning and
recirculation to reach the set temperature. Allow time for the system to reach the desired
temperature. If the air delivery mode or fan speed is manually adjusted, automatic opera
-tion is turned off.
Recirculation Mode
Press Recirculation Mode to quickly cool the air inside the vehicle or prevent
outside odors from entering the vehicle.
Note: When the Recirculation Mode is used without air conditioning, the air humidity
increases and
the windows may fog.
See Climate Controls in your Owner Manual.
Defog Mode
Defrost Mode Temperature
Control
Recirculation Mode Floor Mode AUTO Automatic
OperationF
Bi-level ModeREAR Rear Window/
Outside Mirror Defogger
F
Fan Speed
Control/Off Vent Mode
A/C
Air
Conditioning Control
F Optional equipment