remote control GMC ENVOY 2002 User Guide

3-50
Parental Control Button: This button is located on the
front of the DVD console which is mounted vertically
above the driver's right shoulder. Press this button while
a DVD is playing to freeze the video and mute the audio
to the headphones. It will also disable all other button
operations from the remote and DVD player. The driver
will then be able to gain the attention of the rear seat
passengers. Press this button again to restore normal
play of the DVD.
Ejecting a Disc
Press the stop/eject button on the DVD player once to
stop and a second time to eject the disc.
If a disc is ejected from the player, but not removed,
the DVD player will reload the disc after approximately
10 to 20 seconds.DVD Messages
The following errors may be displayed:

Disc Format Error: This message will be displayed
if a disc is inserted upside down, if the disc is not
able to be read or if the disc format is not compatible.
This message will also be displayed for un
-supported
formats such as CD
-RW s .

Disc Play Error: This message will be displayed
if the mechanism can not play the disc. Severely
scratched discs will cause this error.

Region Code Error: This message will be displayed
for all non Region 1 discs (DVDs sold outside of
North America).

Load/Eject Error: This message will be displayed
if the disc is not properly lined up in the mechanism.

Disc Not Present: This message will be displayed if
the PLAY, EJECT or DVD AUX buttons are pressed
and no disc is in the player.

3-51 Remote Control
To use the remote control, aim it at the small square
window to the left of the disc slot and press the desired
button. Direct sunlight or very bright light may affect
the ability of the entertainment system to receive signals
from the remote control. Be sure the remote's batteries
are not discharged, as this will also affect the function of
the remote control. Objects blocking the line of sight
may also affect the function of the remote control.
NOTICE:
Do not store the remote control in heat or direct
sunlight. This could damage the remote control
and would not be covered by your warranty.
Keep the remote control stored in a cool, dry place.
Remote Control Buttons
PWR (Power): Press this button to turn the DVD
player on or off.
PLAY/PAUSE: Press this button to play a disc.
Press this button while a disc is playing to pause. Press it
again to continue playing.

STOP: Press this button to stop playing, reversing or
fast forwarding the DVD.

3-53
COMP/AUDIO (COMP) Compression: Press and
release this button to display the current compression
displayed on the screen. Press this button again to
select the next compression state. Three compression
states are available including minimum, standard and
off. The compression feature only functions on AC3
(Dolby Digital) encoded DVD video discs.
Press and hold this button to see if the DVD playing
has optional audio tracks, such as different languages
or commentaries. Press and release to change selections.
INPUT/TITLE DVD AUX (Auxiliary): Press and
release this button to switch between the auxiliary input
device and the DVD player.
Press and hold this button to see a display of the DVD's
titles. Press and release to change the titles available.
RTN (Return): When a DVD menu is active and
the return button is pressed, the selected option will be
disabled. This button could have different functions with
different discs.
SCREEN BRIGHTNESS: Press the plus or
minus symbol to increase or decrease the brightness
of the screen. This button can also be found above the
video screen.
LIGHT: Press this button to illuminate the keypad
for about eight seconds.Setup Menu
To access the setup menu, ensure a DVD disc is in the
player and the video is in stop mode. Press the menu key.
Once the menu is activated, use the UP, DOWN, RIGHT,
LEFT, and Enter buttons to navigate the screen.
The setup menu allows the user to select default preferences
for Menu Language, Subtitle Language, Audio Language,
TV Aspect, TV Mode, and Dynamic Range Compression.
Not all DVDs support all the feature defaults in the
setup menus. In the event a particular feature is not
supported, defaults will be provided by the DVD media.
Exit the setup menu by pressing the RETURN button
on the remote control. If you make changes to the
system setup defaults, the disc will resume play from
it's beginning and not where it previously left off.
Battery Replacement
To change the batteries, do the following:
1. Unclip the battery door located on the back of
the remote control.
2. Remove the batteries from the compartment.
3. Replace the two AA batteries. Make sure that
they are installed correctly.
If the remote control is to be stored for a long period
of time, remove the batteries and keep them in a cool,
dry place.

3-54 Tips and Troubleshooting Chart
ProblemRecommended Action
No power.The ignition might be on.
The parental control button
might have been pressed.
(The power LED will flash.)
Disc will
not play.The Input/Title on the remote
might be set for auxiliary.
The disc is upside down or
is not compatible.
No sound.The volume on the headphones
could be too low. Adjust it on
the front panel or the remote.
The picture is
distorted during
fast forward or
fast reverse.This is normal for this operation.
ProblemRecommended Action
The picture
does not fill
the screen.
There are black
borders on the
top and bottom
or on both sides
or it looks
stretched out.Quickly press and release the
SIZE/ANGLE button on the
remote. This will fill the screen.
If the screen looks stretched
out, press and release the
SIZE/ANGLE button again.
If there are borders on the top
and bottom, the movie may have
been made that way for a standard
screen. Pressing the SIZE/ANGLE
button should fill the sides.
I ejected the disc
and tried to take
it out, but it was
pulled back into
the slot.Eject the disc again.

3-55
ProblemRecommended Action
The language
in the audio or
on the screen
is wrong.Press and hold the COMP/AUDIO
button on the remote. This will
access the DVD's main menu.
Go to the system menu and check
the default settings for menu
language, subtitle language
and audio language.
The remote does
not work.Point the remote directly at
the player, but not too close
to the screen.
The batteries could be dead or
put in wrong.
If the power button on the player
is flashing, the parental control
is on, which disables the remote.
I can not
hear anything
when I lower
the volume.Quickly press and release the
COMP/AUDIO button on the
remote. This tells you the current
default setting. Press and release
the COMP/AUDIO button again
to choose another setting.
ProblemRecommended Action
How do I get
subtitles on
or off?Press and hold the DISP/S-TITLE
button on the remote to go to the
DVD's main menu. Then follow
the prompts.
After stopping
the player,
I push PLAY
but sometimes
the DVD starts
where I left off
and sometimes
at the beginning.Press the STOP button on the
remote to resume where the
DVD left off.
Press the STOP button twice to
start the DVD at the beginning.
If the power is off and the
DVD is still in the player,
press the PLAY button.
The DVD is
playing but
there is no
picture or sound.
The auxiliary
medium (video
game, camcorder,
etc.) is running
but there is no
picture or sound.Press the INPUT/TITLE
button on the remote to get
to auxiliary input.
The auxiliary medium's cords
could be plugged into the
wrong jack.

4-18 Traveling to Remote Areas
It makes sense to plan your trip, especially when going
to a remote area. Know the terrain and plan your route.
You are much less likely to get bad surprises. Get
accurate maps of trails and terrain. Try to learn of any
blocked or closed roads.
It's also a good idea to travel with at least one other
vehicle. If something happens to one of them, the
other can help quickly.
Does your vehicle have a winch? If so, be sure to read
the winch instructions. In a remote area, a winch can be
handy if you get stuck. But you'll want to know how to
use it properly.
Getting Familiar with Off-Road Driving
It's a good idea to practice in an area that's safe and
close to home before you go into the wilderness.
Off
-road driving does require some new and different
driving skills. Here's what we mean.
Tune your senses to different kinds of signals. Your
eyes, for example, need to constantly sweep the terrain
for unexpected obstacles. Your ears need to listen for
unusual tire or engine sounds. With your arms, hands,
feet and body, you'll need to respond to vibrations and
vehicle bounce.Controlling your vehicle is the key to successful
off
-road driving. One of the best ways to control your
vehicle is to control your speed. Here are some things to
keep in mind. At higher speeds:

you approach things faster and you have less time to
scan the terrain for obstacles.

you have less time to react.

you have more vehicle bounce when you drive
over obstacles.

you'll need more distance for braking, especially
since you're on an unpaved surface.
CAUTION:
When you're driving off-road, bouncing and
quick changes in direction can easily throw you
out of position. This could cause you to lose
control and crash. So, whether you're driving on
or off the road, you and your passengers should
wear safety belts.