start stop button GMC ENVOY 2002 User Guide

3-52
EJECT/LOAD: Press this button to eject a DVD
while it is playing. If the disc has been ejected and not
removed from the player, pressing this button will load
the disc. The stop/eject button on the DVD player will
also load the disc if the disc is ejected and not removed.
REW (Rewind): Press this button to reverse the
DVD in 5x speed. To stop reversing, press this button
again. This button may not work when the DVD is
playing the copyright or the previews.


FWD (Fast Forward): Press this button to fast
forward the DVD in 5x speed. To stop fast forwarding,
press this button again. This button may not work when
the DVD is playing the copyright or the previews.
PREV (Previous): Press this button to return to
the start of the current chapter. Press this button again
to backup to the previous chapter. This button may
not work when the DVD is playing the copyright or
the previews.


NEXT: Press this button to jump to the beginning
of the next chapter. This button may not work when the
DVD is playing the copyright or the previews.
MENU: Press this button to view the media menu.
The media menu is different on every disc. Use the up
and down and the right and left arrow buttons to movethe cursor around the media menu. After making your
selection, press enter. Some discs may contain a short
skit leading up to the media menu.
WIRED VOLUME: Press the plus or minus
symbol to increase or decrease the volume of the wired
headphones. You can press repeatedly or press and hold
the plus or minus symbol to increase or decrease the
volume in large amounts.
SIZE/ANGLE: This button controls the screen
ratio of the video display. Press and release this button
to stretch a 4:3 picture to fit the wide aspect ratio
16:9 screen.
Press and hold this button to choose different angles
of the same scene. Press and release this button again
to change angles. This feature is not available on all
DVD discs.
DISP/S
-TITLE (Display) CHAP TRK
(Chapter Track): Press and release this button to
display the title, chapter and elapsed time of the
current video segment or the track and time if a CD
is being played.
Press and hold this button to see the DVD's subtitle
language. Press and release this button again to change it.
This feature is not available on all DVD discs.

3-55
ProblemRecommended Action
The language
in the audio or
on the screen
is wrong.Press and hold the COMP/AUDIO
button on the remote. This will
access the DVD's main menu.
Go to the system menu and check
the default settings for menu
language, subtitle language
and audio language.
The remote does
not work.Point the remote directly at
the player, but not too close
to the screen.
The batteries could be dead or
put in wrong.
If the power button on the player
is flashing, the parental control
is on, which disables the remote.
I can not
hear anything
when I lower
the volume.Quickly press and release the
COMP/AUDIO button on the
remote. This tells you the current
default setting. Press and release
the COMP/AUDIO button again
to choose another setting.
ProblemRecommended Action
How do I get
subtitles on
or off?Press and hold the DISP/S-TITLE
button on the remote to go to the
DVD's main menu. Then follow
the prompts.
After stopping
the player,
I push PLAY
but sometimes
the DVD starts
where I left off
and sometimes
at the beginning.Press the STOP button on the
remote to resume where the
DVD left off.
Press the STOP button twice to
start the DVD at the beginning.
If the power is off and the
DVD is still in the player,
press the PLAY button.
The DVD is
playing but
there is no
picture or sound.
The auxiliary
medium (video
game, camcorder,
etc.) is running
but there is no
picture or sound.Press the INPUT/TITLE
button on the remote to get
to auxiliary input.
The auxiliary medium's cords
could be plugged into the
wrong jack.

3-56
ProblemRecommended Action
The audio or
video skips
or jumps.The DVD could be dirty or
scratched. Try cleaning the DVD.
When I return to
the DVD from
the system menu,
sometimes it
plays from the
beginning and
sometimes from
where it left off.If the STOP button was pressed
once, it resumes play from where
it left off.
If the STOP button was pressed
twice, it will start at the beginning
of the DVD.
However, if a change was made to
the menu, the DVD will start from
the beginning, even if the STOP
button was only pressed once.
The fast forward,
fast reverse,
previous and
next functions
do not work.Some commands that do one thing
for DVDs will not always work
or perform the same function for
audio, CDs or games.
ProblemRecommended Action
My disc is
stuck in the
player. The
EJECT/LOAD
button does
not work.Press the EJECT/LOAD button on
the remote, or the STOP/EJECT
button on the DVD player.
Turn the power off, then on again.
I lost the
remote and/or
the headphones.See your dealer for assistance.
What is the best
way to clean
the screen?Pour some isopropyl or rubbing
alcohol on a clean cloth and wipe.
Sometimes
the wireless
headphone
audio cuts out
or buzzes for a
moment then it
comes back.This could be caused by
interference from cell towers
or by using your cell phone in
the vehicle.

4-10
The TRAC OFF light on the button will come on under
the following conditions:

The Traction Assist System is turned off, either by
pressing the TAS on/off button or turning off the
automatic engagement feature of the TAS.

The transmission is in FIRST (1); TAS will not
operate in this gear. This is normal.

The vehicle is driven on an extremely rough road.
When the vehicle leaves the rough surface, slows
down or stops, the light will go off and TAS will be
on again. This is normal.

A Traction Assist System, Anti
-Lock Brake System
or engine
-related problem has been detected and the
vehicle needs service.
The Traction Assist System, as delivered from the
factory, will automatically come on whenever you start
your vehicle. To limit wheel spin, especially in slippery
road conditions, you should always leave the system on.
But you can turn the TAS off if you ever need to. You
should turn the TAS off if your vehicle ever gets stuck in
sand, mud or snow and rocking the vehicle is required.
See ªRocking Your Vehicleº in the Index.
To turn the system on
or off press the TAS
on/off button located
near the shift lever.
If you used the button
to turn the system off,
the TRAC OFF light
on the button will
come on and stay on.
You can turn the system back on at any time by pressing
the button again. The TRAC OFF light on the button
should go off.
If desired, you can change the TAS automatic
engagement feature so that the system will not come on
automatically when the engine is started. To do so:
1. Park the vehicle with the ignition off and the
transmission in PARK (P).
2. Turn the ignition to RUN; do not start the engine.

4-11
3. Apply the brake pedal, press the accelerator pedal to
the floor and then press the TAS on/off button and
hold it down for at least six seconds.
4. Release the TAS button and both pedals.
5. Turn off the ignition and wait a few seconds.
The next time you start your vehicle, the TAS will not
automatically come on. You can restore the automatic
feature by using the same procedure. Whether the
TAS is set to come on automatically or not, you can
always turn the system on or off by pressing the TAS
on/off button.
Steering
Power Steering
If you lose power steering assist because the engine
stops or the system is not functioning, you can steer
but it will take much more effort.
Steering Tips
Driving on Curves
It's important to take curves at a reasonable speed.
A lot of the ªdriver lost controlº accidents mentioned
on the news happen on curves. Here's why:Experienced driver or beginner, each of us is subject to
the same laws of physics when driving on curves. The
traction of the tires against the road surface makes it
possible for the vehicle to change its path when you turn
the front wheels. If there's no traction, inertia will keep
the vehicle going in the same direction. If you've ever
tried to steer a vehicle on wet ice, you'll understand this.
The traction you can get in a curve depends on the
condition of your tires and the road surface, the angle
at which the curve is banked, and your speed.
While you're in a curve, speed is the one factor you
can control.
Suppose you're steering through a sharp curve.
Then you suddenly accelerate. Both control
systems
-- steering and acceleration -- have to do
their work where the tires meet the road. Adding the
sudden acceleration can demand too much of those
places. You can lose control. Refer to ªTraction Assist
Systemº in the Index.
What should you do if this ever happens? Ease up on the
accelerator pedal, steer the vehicle the way you want it
to go, and slow down.
Speed limit signs near curves warn that you should
adjust your speed. Of course, the posted speeds are
based on good weather and road conditions. Under less
favorable conditions you'll want to go slower.