glove box GMC ENVOY 2007 Get To Know Guide

A.Exterior Lamp Controls
B.Air Outlets
C.Turn Signal/Multifunction Lever
D.OnStar
®/Audio Steering Wheel
Controls
E.Instrument Panel Cluster
F.Audio Steering Wheel ControlsG.Ignition Switch
H.Audio System
I.Climate Controls
J.Hood Release
K.Driver Information Center (DIC)
Steering Wheel Controls
L.Transfer Case ControlsM.Shift Lever
N.Lighter
O.Accessory Power Outlets
P.Parking Brake
Q.Rear Window Washer/Wiper
R.Rear Window Defogger
S.Glove Box
Getting to Know YourEnvoy2
See Section 3 of your Owner Manual.
Instrument Panel
DRIVER INFORMATION

5
Customization Button
• Press once and the vehicle settings
will be displayed. Press again to
scroll through and set the customization features.
Select Button
• Press to select your customiza
tion feature setting while it isdisplayed on the DIC, and to move
on to the next feature.
• The customization features can be
reset to their default mode by holding
and down for four seconds.
Language Options
• If you find that the unit displays a lan
guage other than the one you preferand you are unable to change it, hold
and down until the display
begins cycling through the threeavailable languages. Release the buttons when you see the preferredlanguage.
Displaying Driver Preferences
• The driver preferences are recalled
by pressing memory button 1 or 2
located on the driver’s door. The lastvalue displayed for each preferenceis saved automatically.
See Section 3 of your Owner Manual.
SAFETY & SECURITY
Lockout Protection
Prevent your ignition key from being
locked in your vehicle
• When the key is in the ignition and
a door is open, pressing any power
door lock switch unlocks the driver’sdoor and locks all other doors.
See Section 2 of your Owner Manual.
OnStar®(if equipped)
If your vehicle is OnStarequipped, the
OnStar system provides invehicle safety,
security, and phone services, available
24 hours a day, 7 days a week. These
services are easily accessed through the
three OnStar buttons in your vehicle.
• Press the blue OnStar button to con
nect to an OnStar Advisor for services
such as OnStar Vehicle Diagnosticsor driving directions and locationassistance.*
• Press the white Phone button to make
phone calls using OnStar HandsFreeCalling.**
• Press the red Emergency button to
connect to an OnStar Advisor who
can contact a nearby emergency
services provider to request emergency services be dispatched to yourlocation.
For more information about OnStar fea
tures, refer to the OnStar Owner’s Guideand enclosed audio CD located in yourglove box.
* Routing and location assistance may require
service upgrade
**Available in most markets
See Section 2 of your Owner Manual.

Getting to Know YourEnvoy16
PERFORMANCE & MAINTENANCE
Malfunction Indicator Lamp
(Service Engine Soon Lamp)
This instrument panel cluster lamp
illuminates under a variety of conditionswhen the OnBoard Diagnostics II (OBDII) system detects a malfunction in the
vehicle’s emission controls.
If the Malfunction Indicator Lamp
is lit steadily, check the gas cap toensure it is present and securely fastened
• Turn the cap clockwise until a ratch
eting sound is heard, signaling that itis secure.
•If this is the cause of the condition, a
few driving trips with the cap installedproperly should turn the light off.
See Section 3 of your Owner Manual.
Electronically Controlled
Air Suspension (if equipped)
Occasional whirring and/or hissing
sound under the rear of the vehicle
• This sound indicates that the sys
tem’s air compressor is operating to
provide a level ride height, and is normal.
See Section 4 of your Owner Manual.
Air Inflator System (if equipped)
Locate the air
inflator unit and kit
The inflator unit is in
the rear compart
ment on the passenger side of thevehicle, behind an
access cover.
An inflator kit, with a
22foot hose and three nozzle adapters,is located in the glove box.
Use the air inflator
1. Open the access cover.
2. Attach the appropriate nozzle adapter
to the end of the hose (if required).
3. Attach that end of the hose to the
object you are inflating. Attach theother end of the hose to the inflatoroutlet.
4. Press and release the on/off switch
to turn the air inflator on. An indicator
light verifies that the inflator is
running.
5. When inflation is complete, press and
release the on/off switch again.
6.Remove the hose from the outlet
(load leveling will not operate when
the hose is attached to the outlet).
See Section 5 of your Owner Manual.