check engine GMC SAVANA 1998 User Guide
[x] Cancel search | Manufacturer: GMC, Model Year: 1998, Model line: SAVANA, Model: GMC SAVANA 1998Pages: 388, PDF Size: 20.04 MB
Page 171 of 388

Anti-Lock Brakes (ABS) 
Your vehicle has anti-lock  brakes (ABS).  ABS is an 
advanced electronic braking system that  will help 
prevent a braking skid. 
When  you start your engine  and  begin to drive away, 
your anti-lock  brake system  will check  itself. 
You may 
hear  a momentary  motor or clicking  noise while this  test 
is  going 
on. This  is  normal. 
ANTI - 
LOCK 
United  States 
Canada 
If there’s a problem  with the anti-lock  brake system, this 
warning light  will  stay 
on. See “Anti-Lock  Brake 
System  Warning  Light” in  the  Index.  Here’s  how  anti-lock  works.  Let’s  say  the  road 
is wet. 
You’re  driving 
safely. Suddenly  an  animal jumps out in 
front  of  you. 
You slam 
on the  brakes.  Here’s what happens with ABS. 
A computer  senses  that  wheels  are  slowing  down. If one 
of the  wheels is about  to stop rolling,  the  computer will 
separately work the  brakes  at  each  front  wheel  and  at 
both  rear  wheels. 
4-7 
ProCarManuals.com 
Page 184 of 388

The exit speed  is  usually posted. 
Reduce  your speed according  to your speedometer, 
not 
to  your  sense of motion. After  driving for any  distance 
at  higher  speeds,  you 
may tend to think you are going 
slower  than you actually are. 
Before  Leaving on a  Long Trip 
Make  sure you’re  ready.  Try  to  be  well  rested. If you 
must  start  when  you’re not fresh 
-- such  as after  a day’s 
work 
-- don’t  plan to make  too many  miles that first part 
of  the  journey.  Wear comfortable  clothing and shoes  you 
can  easily drive 
in. 
Is your  vehicle  ready for  a long trip?  If  you  keep it 
serviced  and maintained,  it’s  ready  to  go. If it  needs 
service, have 
it done before starting out. Of course, 
you’ll  find experienced  and able  service  experts 
in GM 
dealerships  all across  North America.  They’ll be  ready 
and  willing  to  help if  you  need 
it. 
Here are some things  you can check  before  a trip: 
0 
0 
0 
0 
0 
0 
a 
Windshield  Washer  Fluid: Is the reservoir  full? Are 
all  windows  clean inside and  outside? 
Wiper Blades: Are they in good  shape? 
Fuel, Engine  Oil, Other Fluids: Have  you  checked 
all  levels? 
Lamps: Are  they  all  working? Are the lenses  clean? 
Tires: They  are vitally important to  a safe, 
trouble-free  trip. 
Is the  tread  good  enough for 
long-distance  driving?  Are the tires  all  inflated 
to the 
recommended  pressure? 
Weather Forecasts: What’s the weather  outlook 
along  your route? 
Should you  delay  your  trip a short 
time to avoid  a major  storm system? 
Maps: Do you have up-to-date  maps? 
4-20 
ProCarManuals.com 
Page 185 of 388

Highway  Hypnosis 
Is there  actually  such a condition as “highway  hypnosis”? 
Or  is  it  just 
plain falling  asleep  at  the  wheel?  Call it 
highway  hypnosis,  lack  of awareness, or whatever. 
There  is  something  about 
an easy  stretch of road  with  the 
same  scenery,  along  with  the 
hum of  the  tires  on  the  road, 
the  drone 
of the  engine,  and  the  rush  of the  wind  against 
the  vehicle  that  can  make  you  sleepy.  Don’t  let 
it happen 
to  you! 
If it does,  your  vehicle  can  leave the road in less 
than a second, and  you  could  crash  and  be  injured. 
What  can  you do  about  highway hypnosis?  First, be 
aware that  it  can  happen. 
Then  here 
are some  tips: 
Make  sure  your vehicle is well ventilated, with  a 
comfortably  cool interior. 
Keep your  eyes  moving.  Scan  the  road ahead and 
to  the  sides. Check your  mirrors and your 
instruments  frequently. 
0 If you  get sleepy, pull  off the  road into  a rest, service 
or  parking  area  and take 
a nap,  get some exercise,  or 
both.  For safety, treat  drowsiness on the  highway  as 
an  emergency. 
Hill and  Mountain  Roads 
Driving  on steep  hills or mountains is different  from 
driving  in flat  or  rolling terrain. 
4-21 
ProCarManuals.com 
Page 186 of 388

If  you drive regularly  in  steep country,  or if you’re 
planning  to visit  there,  here  are some  tips  that  can  make 
your  trips  safer  and  more  enjoyable. 
0 Keep  your  vehicle  in  good  shape. Check  all  fluid 
levels  and  also  the  brakes, tires, cooling  system  and 
transmission.  These parts can  work  hard on 
mountain  roads. 
0 Know  how  to go  down hills.  The most  important 
thing 
to know  is  this:  let  your engine do some of the 
slowing  down.  Shift to 
a lower  gear when you go 
down  a  steep or long hill. 
/r CAUTION: 
If’ you  don’t  shift down,  your  brakes  could get so 
hot  that  they wouldn’t  work well.  You  would then 
have  poor  braking 
or even  none  going down a hill. 
You  could  crash.  Shift  down  to  let your  engine 
assist  your  brakes 
on a steep  downhill  slope. 
1 
A CAUTION: 
Coasting downhill in NEUTRAL (N) or with  the 
ignition 
off is  dangerous.  Your brakes will have to 
do  all the  work  of slowing  down.  They could get 
so 
hot that  they wouldn’t  work well. You would  then 
have  poor  braking  or even  none  going  down  a hill. 
You  could  crash. 
Always have  your  engine running 
and  your  vehicle  in  gear when  you 
go downhill. 
a 
0 
0 
0 
Know  how  to go uphill.  You  may  want  to  shift  down 
to  a  lower  gear.  The  lower  gears  help  cool  your  engine 
and  transmission,  and 
you can  climb  the hill better. 
Stay 
in your  own  lane when  driving  on  two-lane 
roads  in  hills  or mountains.  Don’t  swing  wide  or 
cut 
across the center of the  road.  Drive  at  speeds  that  let 
you  stay  in  your  own  lane. 
As you go  over  the  top of a hill,  be alert. There  could  be 
something 
in your  lane,  like a stalled car or  an  accident. 
You  may  see  highway  signs  on  mountains  that  warn 
of 
special  problems.  Examples  are  long  grades,  passing  or 
no-passing  zones, 
a falling  rocks  area  or  winding 
roads.  Be  alert  to  these  and  take  appropriate  action. 
4-22 
ProCarManuals.com 
Page 190 of 388

Snow  can  trap  exhaust gases under  your  vehicle. 
This  can  cause  deadly 
CO (carbon  monoxide)  gas 
to  get  inside. 
CO could  overcome  you and  kill 
you. You  can’t  see  it or smell  it, so you might  not 
know  it  is  in  your  vehicle. Clear  away  snow  from 
around  the  base 
of your  vehicle,  especially  any 
that  is blocking  your  exhaust  pipe. And  check 
around  again 
from time  to  time  to  be sure  snow 
doesn’t  collect there. 
Open 
a window  just a little  on  the  side of the 
vehicle  that’s  away 
from the wind.  This will help 
keep 
CO out. 
Run your  engine  only  as  long as you  must.  This saves 
fuel.  When  you  run  the  engine, make it go a little  faster 
than  just idle.  That  is,  push 
the accelerator  slightly.  This 
uses  less fuel for  the  heat  that 
you get  and it keeps  the 
battery  (or  batteries)  charged. 
You will  need a 
well-charged  battery  (or  batteries) to restart  the  vehicle, 
and  possibly  for signaling  later on  with  your  headlamps. 
Let  the  heater 
run for a  while. 
If 
you have  a diesel  engine, you may  have to run it at a 
higher  speed to get  enough  heat.  Then, shut the engine 
off and  close  the  window  almost all  the  way to preserve 
the  heat.  Start  the  engine again  and  repeat  this  only 
when  you  feel  really  uncomfortable  from the cold.  But 
do 
it as  little as possible.  Preserve the fuel  as long  as you 
can. 
To help  keep  warm,  you  can  get out of  the  vehicle 
and  do some  fairly  vigorous  exercises every  half  hour  or 
so until  help comes. 
4-26 
ProCarManuals.com 
Page 199 of 388

Making  Turns 
NOTICE: 
Making  very  sharp  turns  while  trailering  could cause  the  trailer  to  come  in  contact  with  the vehicle.  Your vehicle  could  be  damaged.  Avoid 
making  very  sharp  turns  while  trailering. 
When  you’re  turning  with  a trailer,  make  wider  turns  than 
normal. 
Do this so your  trailer  won’t  strike  soft  shoulders, 
curbs,  road  signs,  trees  or other  objects.  Avoid  jerky  or 
sudden  maneuvers.  Signal  well 
in advance. 
Turn  Signals  When  Towing  a  Trailer 
When you tow a trailer,  your  vehicle  has  to  have  extra 
wiring  and  a heavy-duty  turn  signal  flasher (included in 
the  optional trailering package). 
The  arrows  on  your  instrument  panel  will flash 
whenever  you signal 
a turn  or lane change.  Properly 
hooked  up,  the trailer  lamps will also  flash,  telling  other 
drivers  you’re about 
to turn, change  lanes or stop.  When  towing 
a trailer, 
the arrows on your  instrument 
panel 
will flash  for turns  even if the bulbs  on  the  trailer 
are  burned  out. Thus,  you  may  think  drivers behind 
you are seeing  your  signal when  they  are not.  It’s 
important  to  check occasionally 
to be sure the  trailer 
bulbs  are still  working. 
Driving  On  Grades 
Reduce  speed  and  shift to a lower gear before you  start 
down a  long or steep downgrade.  If  you  don’t  shift 
down,  you might  have 
to use your  brakes so much  that 
they  would  get hot  and 
no longer  work  well. 
On a long  uphill  grade, shift  down  and  reduce your 
speed  to around 
45 mph (70 km/h) to reduce  the 
possibility  of  engine and  transmission  overheating. 
When  towing  at  high  altitude  on  steep  uphill  grades, 
consider  the  following:  Engine  coolant  will  boil  at  a lower 
temperature  than  at  normal  altitudes.  If  you turn  your 
engine 
off immediately  after  towing  at  high  altitude  on 
steep  uphill  grades,  your  vehicle  may  show  signs  similar  to 
engine  overheating. 
To avoid  this,  let the engine  run  while 
parked  (preferably 
on level  ground)  with the automatic 
transmission 
in PARK  (P)  for a few  minutes  before  turning 
the  engine  off.  If  you do get 
the overheat  warning,  see 
“Engine  Overheating”  in 
the Index. 
4-35 
ProCarManuals.com 
Page 200 of 388

Parking on Hills 
You really should  not park  your  vehicle,  with a trailer 
attached,  on a hill.  If something goes  wrong, your rig 
could start  to  move. People can be injured, and  both 
your vehicle  and the trailer  can be damaged. 
But if you  ever  have to park your rig on a hill, here’s 
how  to do  it: 
1. Apply  your  regular brakes, but don’t  shift into 
PARK 
(P) yet.  Then  turn  your  wheels  into the  curb  if 
facing  downhill  or  into traffic if facing  uphill. 
2. Have someone place  chocks under the trailer  wheels. 
3. When the wheel  chocks  are in place, release  the 
regular  brakes until  the chocks  absorb the load. 
4. Reapply the  regular brakes. Then apply your parking 
brake  and  then  shift to 
PARK (P). 
5. Release  the regular brakes. 
When You Are  Ready  to  Leave  After 
Parking 
on a Hill 
1. Apply  your regular  brakes and  hold  the pedal  down 
while  you: 
Start your engine; 
Shift into a gear;  and 
Release the parking brake. 
2. Let up  on  the  brake pedal. 
3. Drive slowly until the trailer is clear  of the  chocks. 
4. Stop  and have someone pick  up and store the chocks. 
Maintenance  When  Trailer  Towing 
Your vehicle will  need  service more often when  you’re 
pulling  a trailer.  See  the  Maintenance Schedule for  more 
on this.  Things that are especially important  in trailer 
operation are automatic transmission fluid (don’t 
overfill),  engine  oil,  axle  lubricant, belt, cooling system 
and  brake  adjustment.  Each of these 
is covered in this 
manual,  and the Index will  help you find  them  quickly. 
If you’re trailering,  it’s a good  idea to review these 
sections before  you start your trip. 
Check  periodically to  see that all  hitch nuts and bolts 
are  tight. 
4-36 
ProCarManuals.com 
Page 207 of 388

A CAUTION: 
Using a  match  near  a  battery  can  cause  battery 
gas  to  explode.  People  have  been hurt doing  this, 
and  some  have  been  blinded.  Use 
a flashlight if 
you  need  more  light. 
Be  sure  the  batteries  have  enough  water. You 
don’t  need  to  add  water  to  the  ACDelco 
Freedom@  battery  (or  batteries)  installed  in 
every  new 
GM vehicle.  But if a battery  has  filler 
caps,  be  sure  the  right  amount  of fluid  is there.  If 
it  is 
low, add  water  to  take  care  of that  first. If 
you  don’t,  explosive  gas  could  be  present. 
Battery  fluid  contains  acid  that  can  burn  you. 
Don’t  get 
it on  you.  If you accidentally  get it in 
your  eyes or on  your  skin,  flush  the  place  with 
water  and  get  medical  help  immediately. 
5. Check that the jumper  cables don’t  have  loose or 
missing  insulation. 
If they do, you could get a  shock. 
The  vehicles  could be damaged,  too. 
Before 
you connect  the cables,  here are some  basic 
things 
you should  know.  Positive (+) will  go to 
positive 
(+) and  negative (-) will  go to an unpainted 
metal  engine  part or 
a body  metal  surface. Don’t 
connect positive 
(+) to  negative (-) or you will get  a 
short  that  would  damage the  battery  and  maybe  other 
parts,  too. And  don’t  connect  the  negative 
(-) to 
negative 
(-). 
Fans  or  other  moving  engine  parts  can  injure  you 
badly.  Keep  your  hands 
away from  moving  parts 
once  the  engine  is running. 
I 
5-5 
ProCarManuals.com 
Page 241 of 388

Section 6 Service  and  Appearance  Care 
Here you  will  find information about the care of your vehicle.  This section  begins  with service and fuel  information, 
and  then  it shows  how to check important fluid  and  lubricant levels. There is also  technical  information  about  your 
6-2 
6-3 
6-5 
6-5 
6-7 
6-8 
6- 11 
6- 12 
6-  16 
6- 
17 
6-2 1 
6-2 1 
6-24 
6-25 
6-25 
6-26 
6-27 
6-3 
1 
vehicle,  and  a  part devoted to its appearance care. 
Service 
Fuel  (Gasoline Engine) 
Fuels  in Foreign Countries (Gasoline Engines) 
Filling  Your  Tank  (Gasoline Engine) 
Filling  a Portable  Fuel Container 
Checking Things  Under the Hood 
Noise Control System  Engine  Oil (Gasoline Engine) 
Air  Cleaner (Gasoline Engines) 
Automatic  Transmission  Fluid 
Rear  Axle 
Engine Coolant 
Radiator  Pressure  Cap 
Thermostat 
Power Steering  Fluid 
Windshield  Washer Fluid 
Brakes 
Battery 
6-32 
6-32 
6-40 
6-4 
1 
6-5 1 
6-5 1 
6-55 
6-56 
6-57 
6-57 
6-57 
6-59 
6-60 
6-6 
1 
6-66 
6-67 
6-69  Bulb 
Replacement 
Halogen Bulbs 
Windshield  Wiper  Blade  Replacement 
Tires  Appearance  Care 
Cleaning  the Inside 
of Your  Vehicle 
Cleaning  the Outside  of  Your  Vehicle 
Cleaning Aluminum Wheels  (If Equipped) 
Cleaning  Tires 
Sheet  Metal  Damage 
Finish Damage 
Appearance  Care Materials Chart 
Vehicle  Identification  Number (VJN) 
Electrical  System 
Replacement  Bulbs 
Capacities  and Specifications 
Normal  Maintenance  Replacement  Parts 
6-1 
ProCarManuals.com 
Page 243 of 388

You can  be  injured  and  your  vehicle  could  be 
damaged 
if you  try  to  do  service  work  on  a 
vehicle  without  knowing  enough  about  it. 
Be sure  you have  sufficient  knowledge, 
experience,  the  proper  replacement  parts 
and  tools  before  you attempt  any  vehicle 
maintenance  task. 
Be  sure  to  use the  proper  nuts,  bolts  and 
other  fasteners.  “English”  and  “metric” 
fasteners  can  be  easily  confused. 
If you  use 
the  wrong  fasteners,  parts  can  later  break 
or  fall  off.  You  could  be  hurt. 
Adding  Equipment  to  the  Outside of 
Your  Vehicle 
Things  you might  add to the  outside  of  your  vehicle  can 
affect  the  airflow around 
it. This may cause  wind  noise 
and  affect  windshield  washer  performance. Check with 
your dealer before adding equipment to  the outside  of 
your  vehicle. 
Fuel (Gasoline Engine) 
If  your  vehicle  has  a diesel  engine, see “Diesel Fuel 
Requirements and 
Fuel System”  in  the  Diesel  Engine 
Supplement.  For  vehicles  with  gasoline engines, 
please  read this. 
Use  regular  unleaded  gasoline rated at 87  octane  or 
higher.  At  a minimum, it  should  meet specifications 
ASTM  D4814 in  the  United  States and CGSB 
3.5-M93 
in  Canada.  Improved  gasoline specifications  have 
been  developed  by the  American  Automobile 
Manufacturers  Association (AAMA) for better 
vehicle  performance  and engine  protection.  Gasolines 
meeting  the  AAMA  specification  could provide 
improved  driveability  and  emission control system 
protection  compared 
to other gasolines. 
Be sure the  posted octane 
is at least 87.  If the octane is 
less  than  87, you  may  get a heavy  knocking  noise when 
you  drive. 
If it’s  bad  enough, it can damage your engine. 
If you’re using fuel rated at  87 octane or higher  and  you 
hear  heavy  knocking, your engine  needs service.  But 
don’t  worry  if  you hear a  little pinging  noise  when 
you’re accelerating or  driving up a hill.  That’s  normal, 
and 
you don’t  have to buy a higher  octane fuel to get rid 
of pinging. It’s the  heavy,  constant knock  that  means 
you  have 
a problem. 
6-3 
ProCarManuals.com