belt GMC SIERRA 1993 Service Manual

AN160081
7. Push and pull the child restraint in different directions to be sure it is
To remove the child restraint, just unbuckle the vehicle’s safet\
y belt and let it
go back all the way. The safety belt will move freely again and \
be ready to
work
for an adult or larger child passenger.
Securing a Child Restraint in a Center Seat Position
(Except Extended Cab
Rear Seat)
secure.
K212
When you secure a child restraint in a center seating position you’ll be using
the lap belt. See the earlier part about the top strap
if the child restraint has
one.
1-43
ProCarManuals.com

1. Make the belt as long as possible by tilting the latch plate and pulling it
along the belt.
ANI 63029
2. Put the restraint on the seat. Follow the instructions for the\
child
3. Secure the child in the child restraint as the instructions say.
4. Run the vehicle’s safety belt through or around the restraint. The child
restraint.
restraint instructions will show you how.
..
AN1 63030
5. Buckle the belt. Make sure the release button faces upward or outward,
so you’ll be able to unbuckle it quickly if you ever need to.
1-44
ProCarManuals.com

6. To tighten the belt, pull its free end while you push down on t\
he child
restraint.
7. Push and pull the child restraint in different directions to b\
e sure it is
secure.
If the child restraint isn’t secure, turn the latch plate over and
buckle
it again. Then see if it is secure. If it isn’t, secure the restraint in
a different place in the vehicle and contact the child restraint maker for
t hei r advice.
To remove the child restraint, just unbuckle the vehicle’s safet\
y belt. It will be
ready to work for an adult or larger child passenger.
Securing a Child Restraint in the Center Seat Position
(Extended Cab)
I
PO700
You’ll be using the lap belt. See the earlier part about the top strap if the
child restraint has one.
145
ProCarManuals.com

Seats dk Safety Belts
1. Make lthe belt as long as possible by tilting the latch plate and pulling it
along the belt.
I
AN16301
2. Put the restraint on the seat. Follow the instructions for the\
child
restraint.
3. Secure the child in the child restraint as the instructions say.
4. Run the vehicle’s safety belt through or around the restraint. The child
restraint instructions will show you how.
AN1 63030
5. Buckle the belt. Make sure the release button faces upward or outward,
so you’ll be able to unbuckle it quickly if you ever need to.
1-46
ProCarManuals.com

6. To tighten the belt, pull its free end while you push down on t\
he child
restraint.
7. Push and pull the child restraint in different directions to be sure it is
secure.
If the child restraint isn’t secure, turn the latch plate over and
buckle it again. Then see
if it is secure. If it isn’t, secure the restraint in
a different place in the vehicle and contact the child restraint maker for
their advice.
To remove the child restraint, just unbuckle the vehicle’s safety belt. It will be
ready
to work for an adult or larger child passenger.
Securing a Child Restraint in the Right Front Seat
1
K2137
You’ll be using the lap-shoulder belt. See the earlier part \
about the top strap
if the child restraint has one.
1. Put the restraint on the seat. Follow the instructions for the child
2. Secure the child in the child restraint as the instructions say.
restraint.
3. Pull out the vehicle’s safety belt and run the
lap part through or around
the restraint. The child restraint instructions
will show you how. See if
the shoulder belt would go in front of the child’s face or neck. If so, put
it behind the child restraint.
1-47
ProCarManuals.com

Seats & Safety Belts
AN165013
4. Buckle the belt. Make sure the release button faces upward or \
outward,
so you'll be able to unbuckle it quickly if you ever need to.
5. Pull the rest of the lap belt all the way out of the retractor to set the
lock.
AN1 651 23 AN1 6501 5
6. To tighten the belt, feed the lap belt back into the retractor while you
push down
on the child restraint.
1-48
ProCarManuals.com

7. Push and pull the child restraint in different directions to be sure it is
To remove the child restraint, unbuckle the vehicle's safety belt \
and let it go
back all the way. The safety belt will move freely again and be ready
to work
for an adult or larger child passenger. secure.
2- .. 9. j .I 5.. :
8
'.I
149
ProCarManuals.com

,eats & Safety Belts
Larger Children
AM170054Rl
Children who have outgrown child restraints should wear the vehicle's sa\
fety
belts.
If you have the choice, a child should sit next to a window so the child
can wear a lap-shoulder belt and get the additional restraint a sh\
oulder belt
can provide. Accident statistics show that children are safer
if they are
restrained in the rear seat. But they need
to use the safety belts properly.
Children who aren't buckled up can be thrown out in a crash.
y
8
AM170059
1-50
ProCarManuals.com

Children who aren’t buckled up can strike other people who \
are.
I
1
AM1 70055
* Never do this.
‘b Here two children are wearing the same belt. The belt can’t properly
spread
the impact forces. In a crash, the two children can be
crushed together and seriously injured.
A belt must be used by only
I one person at a time.
Q: What if a child is wearing a lap-shoulder belt, but the child is so
small that the shoulder belt is very close to the child’s face or neck?
A: Move the child toward the center of the vehicle, but be sure that the
shoulder belt still is on the child’s shoulder,
so that in a crash the child’s
upper body would have the restraint that belts provide. If the child is
so small
that the shoulder belt still is very close to the child’s face or neck, you might
want
to place the child in a seat that has a lap belt, if your vehicle has one.
1-51
ProCarManuals.com

Seats & Safety Belts
I CAUTION
AM170056
Never do this.
Here a child is sitting in a seat that has a lap-shoulder belt, but the
shoulder part is behind the child.
If the child wears the belt in this
way, in a crash the child might slide under the belt. The belt’\
s force
would then be applied right on the child’s abdomen. That co\
uld
cause serious
or fatal injuries.
Wherever the child sits, the lap portion of the belt should be worn
low and
snug on the hips, and just touching the child’s thighs. Thi\
s applies belt force
to the child’s pelvic bones in a crash.
Safety Belt Extender
If the vehicle’s safety belt will fasten around you, you should\
use it. But if a
safety belt isn’t long enough
to fasten, your dealer will order you an extender.
It’s free. When you go in to order it, take the heaviest coat you will wear, so
the extender will be long enough for you. The extender will b\
e just for you,
and just for the seat in your vehicle that you choose. Don’t let so\
meone else
use it, and use it only for the seat
it is made to fit. To wear it, just attach it
to the regular safety belt.
Checking Your Restraint Systems
Now and then, make sure all your belts, buckles, latch plates, retractors,
anchorages and reminder systems are working properly. Look for \
any loose
parts
or damage. If you see anything that might keep a restraint system from
doing
its job, have it repaired.
1-52
ProCarManuals.com