oil GMC YUKON 2000 Owner's Guide

GMC YUKON 2000 Owner's Guide YUKON 2000 GMC GMC https://www.carmanualsonline.info/img/44/35603/w960_35603-0.png GMC YUKON 2000 Owner's Guide

Page 304 of 413

GMC YUKON 2000 Owners Guide 6-
6-1
Section 6 Service and Appearance Care
Here you will find information about the care of your vehicle. This section begins with service and fuel information,
and then it shows how to check import

Page 308 of 413

GMC YUKON 2000 Owners Guide 6-5
Fuels in Foreign Countries
If you plan on driving in another country outside the
United States or Canada, the proper fuel may be hard 
to find. Never use leaded gasoline or any other fuel not
reco

Page 311 of 413

GMC YUKON 2000 Owners Guide 6-8
Checking Things Under the Hood
CAUTION:
Things that burn can get on hot engine parts and
start a fire. These include liquids like fuel, oil,
coolant, brake fluid, windshield washer and other
fluid

Page 312 of 413

GMC YUKON 2000 Owners Guide 6-9
VORTEC 4800, 5300 and 6000 V8 Engine
VORTEC 5300 V8 engine shown, locations for other engines similar.
A. Engine Air Cleaner/Filter
B. Coolant Surge Tank
C. Air Filter Restriction Indicator
D. Eng

Page 313 of 413

GMC YUKON 2000 Owners Guide 6-10
Engine Oil
If the CHECK ENG OIL
LEVEL appears on the
instrument panel, it means
you need to check your
engine oil level right away.
For more information, see CHECK ENG OIL LEVEL 
in the Index.
Yo

Page 314 of 413

GMC YUKON 2000 Owners Guide 6-11
When to Add Engine Oil
If the oil is at or below the ADD mark, then youll need
to add at least one quart of oil. But you must use the
right kind. This part explains what kind of oil to use. For

Page 315 of 413

GMC YUKON 2000 Owners Guide 6-12 What Kind of Engine Oil to Use
Oils recommended for your vehicle can be identified by
looking for the starburst symbol.
This symbol indicates that the oil has been certified by
the American Petro

Page 316 of 413

GMC YUKON 2000 Owners Guide 6-13
As shown in the chart, SAE 5W-30 is best for your
vehicle. However, you can use SAE 10W
-30 if its going
to be 0F (
-18C) or above. These numbers on an oil
container show its viscosity, or thi

Page 317 of 413

GMC YUKON 2000 Owners Guide 6-14
How to Reset the CHANGE ENGINE OIL Message
To reset the CHANGE ENGINE OIL message, turn 
the ignition key to RUN with the engine off. Fully press
and release the accelerator pedal three times wit

Page 320 of 413

GMC YUKON 2000 Owners Guide 6-17
3. Remove the air filter by pulling downward on the
element. Remove the second portion of the air filter
by sliding it towards the rear of the vehicle and then
pulling downward.
4. Install the ne
Page:   < prev 1-10 11-20 21-30 31-40 41-50 next >