mirror GMC YUKON XL 2019 Get To Know Guide

4
REMOTE KEYLESS ENTRY TRANSMITTER (KEY FOB)
Unlock
Press to unlock the driver’s door. Press again to unlock all doors.
Lock
Press to lock all doors.
Press and hold the Lock/Unlock buttons to automatically fold/unfold the power mirrors.
Note: To change the Auto Mirror Folding setting, go to Settings > Vehicle > Comfort and Convenience.
Liftglass
Press twice to open the liftglass.
Power Liftgate
Press twice to open or close the power liftgate.
Vehicle Locator/Panic Alarm
Press and release to locate your vehicle. Press and hold to activate the alarm. Press again to cancel the alarm.
Remote Vehicle Start
Press and release the Lock button and then press and hold the button until the turn signal  lamps flash  (about  4 seconds) to start the engine from outside the vehicle. After entering the vehicle, turn on the ignition.
• During a remote start, the engine will run for 15 minutes.
• Remote Start can be extended once by repeating the remote start procedure.
• Press and hold the button until the  parking  lamps turn  off to cancel  a remote start.
• The heated/ventilated seats will turn on  during  a remote  start (if selected in the Vehicle Settings menu) when outside temperatures warrant.
Note: If a key fob is left in the vehicle when locking the vehicle, the Remote Left in Vehicle Alert may sound. To program the remote lock, unlock, and remote start settings, go to Settings > Vehicle > Remote Lock, Unlock, Start.
See Keys, Doors and Windows in your Owner’s Manual.
UNIVERSAL REMOTE SYSTEM
The Universal Remote System on the overhead console enables your vehicle to control 3  different  devices, ranging from garage doors and gates to home light-ing. Go to www.homelink.com for detailed
videos and instructions on how to pro-gram the Universal Remote System. For additional assistance, call 1-800-355-3515.
See Instruments and Controls in your Owner’s Manual.

6
SEAT ADJUSTMENTS
A. Seat Cushion Adjustment
Move the front horizontal control to move the seat forward or rearward, or to tilt, raise or lower the seat.
B. Seatback Adjustment
Move the vertical control to recline or raise the seatback.
C. Lumbar Adjustment
Move the rear control fore/aft to increase/decrease lumbar support or up/down to raise/lower the lumbar location.
SET MEMORY POSITIONS
1. With the vehicle in Park and the
ignition on, adjust the power driver’s seat, power adjustable pedals, power outside mirrors, and power tilt/tele-scopic steering column to the desired positions.
2. Press and release the SET button and then press and hold button 1 on the driver’s door until two beeps sound.
3. Repeat the steps using button 2 for a second driver.
SET EXIT POSITION
1. With the vehicle in Park and the ignition on, adjust the power driver’s seat, power adjustable pedals power, and power tilt/telescopic steering column to the desired positions.
2. Press and release the SET button and then press and hold the Exit button on the driver’s door until two beeps sound.
RECALL POSITIONS
Press and hold button 1 or 2 or the Exit button until the stored position is reached. Releasing the button before the stored position is reached cancels the recall.
The memory/exit positions can be programmed to be recalled automatically when the ignition  is turned  on/off (for exit  recall,  the driver’s  door must  be opened).
To set the Auto Memory Recall or Easy Exit Options, go to Settings > Vehicle > Comfort and Convenience > Auto Memory Recall or Easy Exit Options.
See Seats and Restraints in your Owner’s Manual.
POWER FRONT SEATS
BAC

9
AUTOMATIC CLIMATE CONTROLS
AUTOMATIC OPERATION
1. Press AUTO.
2. Set the temperature.
The system automatically controls the fan speed, air delivery, air conditioning and recirculation to reach the set temperature. Allow time for the system to reach the desired temperature. If the functions are manually adjusted, automatic operation is turned off.
SYNC TEMPERATURE SETTINGS
Press SYNC to link the passenger’s and rear climate temperature settings to the
driver’s setting. When the passenger’s or rear climate setting is adjusted, the  
different  temperature  setting is displayed.
REAR CLIMATE CONTROLS
Press the Power button  to turn  the rear  climate  controls  on/off.
Press the button to lock out the rear controls. Rear climate control
operation is controlled using the front controls.
See Climate Controls in your Owner’s Manual.
Rear Power Control
Driver’s Heated/ Ventilated Seat Buttons
Passenger’s Heated/Ventilated Seat Buttons
AUTO Rear Automatic Operation
Rear Fan Speed
Rear Control Lock-out
Rear Air DeliveryRear Temperature
/ Defog Mode/ Bi-level Mode
/REAR Defrost Mode/ Rear Window/Outside Mirror Defogger
/ Vent Mode/ Floor Mode
Fan Speed Control/On/Off
A/C/ Air Conditioning Control/Recirculation Mode
AUTO Driver’s Temperature Control/Automatic Operation
SYNC Passenger’s Temperature Control/Link setting to driver’s setting

17
FORWARD AUTOMATIC BRAKING – In potential front-end imminent collision situa-tions with detected vehicles, the brakes may be applied, if you have not already done so, to help reduce damage or help avoid collisions at very low speeds with vehicles directly ahead. Forward Automatic Braking works at speeds of 5–50 mph or, if also equipped with Adaptive Cruise ControlF, at speeds above 2 mph.
To set the Forward Automatic Braking and Forward Collision Alert systems to Alert and  Brake,  Alert, or Off,  go to Settings  >  Vehicle  > Collision/Detection  Systems > Forward Collision System.
LANE KEEP ASSIST WITH LANE DEPARTURE WARNING – The system may help you avoid collisions due to unintentional lane departures. The Lane Keep Assist Indicator is green if the system is available to assist. If the vehicle approaches a detected lane marking without using a turn signal in that direction, the system may assist by gently turning the steering wheel and displaying an amber .
If active driver steering is not detected, the amber  may  flash  and the Safety  Alert Seat may pulse  or beeps  may sound  (if selected)  on the  side  of the  departure  direc-tion as the lane marking is crossed. The Lane Keep Assist system does not continu-ously steer the vehicle; the driver needs to steer and be in complete control of the vehicle.
Press the Lane Keep Assist button on the left side of the instrument panel to turn  the system  on or off.
LANE CHANGE ALERT WITH SIDE BLIND ZONE ALERT – While driving, the sys-tem displays a warning symbol on the left or right side mirror when a vehicle is detected in that side blind zone area or rapidly approaching that area. The warning symbol flashes if a  turn  signal  is activated  when a vehicle  has been  detected  on the same side.
 To  turn  the system  on or off,  go to Settings  >  Vehicle  > Collision/Detection  Systems > Lane Change Alert.
REAR VISION CAMERA – When the vehicle is in Reverse, a view of the area behind the vehicle displays on the infotainment screen. Vehicle speed must be below 8 mph.
 To  turn  the Rear  Vision  Camera  Guidelines  or  Rear  Park Assist  Symbols  on  or off, go to Settings > Rear Camera.
REAR CROSS TRAFFIC ALERT – When the vehicle is in Reverse, the system warns of cross-traffic  coming  in either  direction  by displaying  a red  alert  on the  infotainment screen and the left or right side of the Safety Alert Seat pulses or beeps sound (if selected). 
 To  turn  the system  on or off,  go to Settings  >  Vehicle  > Collision/Detection  Systems > Rear  Cross  Traffic  Alert.
FRONT AND REAR PARK ASSIST – During low-speed parking maneuvers, the sys-tem  provides  “distance  to closest  object”  information  on the  Driver  Information  Center and the Safety  Alert Seat pulses  or a beep  sounds  (if  selected).  When an object  is very close,  the Safety  Alert Seat  pulses  or a continuous  beep  sounds  (if selected).
 To  turn  the system  on or off,  press  the Park Assist button on the left side of the instrument panel.
DRIVER ASSISTANCE SYSTEMS
See Driving and Operating in your Owner’s Manual.
F Optional equipment