window GREAT WALL DEER 2006 User Guide

BE-55 Body Electric System
CCL and Electric Rocker Gear System
Definition of the connecting wire of CCL
1. G/R (G/W) Turn lampConnected to the anode wire of the turn lamp (right ) on vehicle, it will output 12 V voltage
when it is in operation
2. O
w/b1)Window-shutting signal outputThis wire has one second of voltage output of 12V when the car door is locking. (top SY SJ)
3. No connection
4. G (Y) Unlocking output of CCLConnected to the locking wire of actuator of CCL, and the normally closed contact in the
internal relay is the grounding wire.It will output 12 v voltage when locking with REMOTE
CONTROLLER or manually because the common spot of relay will contact the normally
opening contact.
5. Bl (G) Locking output of CCLConnected to the locking wire of actuator of CCL, and the normally closed contact inside
the internal relay is the grounding wire.It will output 12 V voltage when locking with
REMOTE CONTROLLER or manually because the common sots of relay will contact
with the normally opening contact.
6. Gr (G/B) Turn lampConnected to the anode wire of left turn lamp of vehicle, it will output 12 v Voltage when in
operation.
7. W (W) Manually controlled unlocking signalThe door lock control the locking process through the manual unlocking switch at left front
door, that is, under the locking condition, press the switch, the lock will be opened (the
switch will return to the connection situation automatically after pressing.
8. Br (R/B) Negative output of door switchConnected to the car door lamp switch, it is connected to the grounding wire (the indoor
lamp will light when opening the door.
9. R/G (G/B) Rotating speed testThe car door will lock automatically when the vehicle reaches a certain speed.
10. W(R ) ACC testConnect to the ACC wire, which will have 12 V voltage when the key is rotated to the ACC position.
11. R (R ) Power anode (12V)Connect to the anode of accumulator on vehicle, in front of which should be set the fuse
so that the voltage will be no less than 10V when the starter is in operation.
12. B(B) Power cathodeConnect to the body (grounding wire), it should be short as possible as can because the
overlong wire will produce the interference source.
SY SJ
1
2
3
4
5 6
7
8
9
10
11
12left turning light
manual switch locking signal

closing window output
none
door switch negative input
speed test
ACC test
power anode 12V
remote control opening lock output
power cathode
remote control closing lock output12V
W
K door switchK
M
M
MM
Items in the parenthesis is for SY diesel model
Items with
are configuration for SJ and top SY

BE-56 Body Electric System
CCL and Electric Rocker Gear System
Diagram of electric rocker gear
Dr
main
auxiliary
12
34 512
34 5
12
34 512
345 mainauxiliary
main auxiliary
12
345 12
34 5
12
34 51
2
1 2 3 4 5
6 7 8 9 10 1
2
1
2
43
5
21
345
1 2
21
3 4
R
N2
34 5
21
2 1
34
5
2 1
34
5
1
2 12
345
electric window relay
STON ACC auxiliary
falling
stop
raising
main
falling
stop
raising
auxiliary
main
falling
stop
raising falling
stop
raising
auxiliary
main
falling
raising
falling
stop
raising
right rear
left rear
right front
left
front
inhibitor switch
falling
stop
raisingstop
right front door switch
left front door switch
battery
fuseignition switchignition switch electric rocker gear
left rear door switch
left rear door switch

BE-57 Body Electric System
CCL and Electric Rocker Gear System
SF
right rear door switch
1
2
3
45
left rear door switch
1
2
345
right front door switch
1
2
345
left front door switch
123 456
7 8 9 10 111213
ignition switch
1 2 3 4 5
6 7
U9 10electric rocker gear
1
2 21
52
3 1
4
21
25
1
4 3
1
2
52
1
4 3
21
12
7
13 1
342
electric window relay
ST ON ACC
battery fuse ignition switch
right rear
left rear
right
front
left
front
control lock
12
11
inhibitor switch
Diagram of electric rocker gear

BE-58 Body Electric System
CCL and Electric Rocker Gear System
Diagram of electric rocker gear
SL SK SY
52 11
234
ST ON ACC
N O P Q
R S T U
1
2 1
2
3
4
51
2
3
4
5 1
2
3
4
51
2
3
4
5 1
2
3
4
51
2
5 right rear
auxiliaryfalling
stop
raising
main
falling
stop
raising
auxiliary
main
falling
stop
raising falling
stop
raising
auxiliary
main
falling
raising
falling
stop
raising
inhibitor switch
falling
stop
raisingstop
battery
fuse
mainauxiliary
mainauxiliary
main
auxiliary
electric window relayleft rear
right front
left front
right front door switch
left front door switch
ignition switch electric rocker gear
left rear door switch
ignition switch
N
2
3
4
54 3
left rear door switch
121
5
1234
5
3
24
121
5
1234
5
3 24
121
5
1234
5
3
24

BE-61
Acoustical equipment system
The devices in this series is the vehicle-equipped acoustical receiver and recorder whose function is realized through
the electronic tuner and CD recorder, therefore, it can receive the amplitude modulation, frequency modulation and
stereo broadcast and can record the CD disc, what??s more, it is with the advanced electric anti-quaking, strong capability
of error correction, fashionable blue LCD liquid crystal digital display, and four-way power output. The device in this
series also has the characteristics such as low distortion, large output power and good performance of anti-interference,
broad frequency range and sweet sound, etc.
Diagram of Acoustical equipment system
SF
fuse
ignition switch
ACC ON ST
side-window aerial
CD deviceloudspeaker
ignition switch CD plugging elementplugging elements of rear
loudspeaker of CD device
1 2 3 4 5
6 7 8 9 1012 34
56 78912
34 5 5
4
1 2
3 5 3
8
4
9
75
6
1
7
Note: For Dr the antenna is the rod type.
battery cigarette lighter left front
right frontleft rearright rear
from small lamp relay
2
amplifier
Body Electric System
Acoustical Equipment System

BE-65
Failure of disc box
v
k
k
ON
v
OFF
OFF
Invalid
Invalid
(d) FM/TV failures
FM receiving effection is
not goodWhether the signal of local TV
station is weakPay attention to the
receiving location
Check whether the aerial
interface peels off
The receiving effection of
TV station is badWhether the signal of local
TV station is weakPay attention to the
receiving location
Check whether amplifier works
normally (the lamp is lighting )Turn the amplifier switch to

ON
position
Search the TV station for
another timeAmplifier failure
(e) disc box cannot be sent out
Disc box cannot be sent out
Press
OPEN
keyMove the small window
shrapnel at bottom of disc box
then it can be sent out
Body Electric System
Acoustical Equipment System

BE-70
SF
1
2 P
4 5 6
7
8 9 10
11 12 13
14
15 16 1718 19
20
21
22
23
2425262728
29
30 3132
33
34
3536
37
38
39
40
41
42
43
44 45 46 47
48
49 50 51
52
53
54
555657 5859
Housing wire harness (continued)
60 61
1 left door lamp switch
2 defrost switch at tail door
3 window regulator at tail door
4 parking brake switch
5 ignition lock
6 combined switch
7 instrument
8 combined switch shell
9 grounding wire
10 amplifying plate of air-conditioner
11 heat-sensitive resistance
12 control panel of air-conditioner
13 A/C Switch
14 glove-box lamp switch
15 glove-box lamp
16 speed-adjusting resistance
17 blower
18 indoor temperature sensor
19 right front loudspeaker
20 brush motor
21 turn lamp on right side22 electric fan relay
23 maxi-fuse
24 joint of wire harness at right front door
25 right front door lamp switch
26 right electric back-up mirror
27 grounding wire
28 rear sound box wire
29 ashtray lamp
30 CD Device wire
31 cigarette lighter A
32 cigarette lighter B
33 dual flasher switch
34 fog lamp switch
35 temperature indicator
36 stop lamp switch
37 brake liquid level sensor
38 control case of central control lock
39 left front loudspeaker
40 automatic aerial
41 turn lamp on left side
42 generator43 left front conner lamp
44 left front lever-shaped lamp
45 front fog lamp
46 left headlamp
47 temperature control switch
48 connected to wire of 220
49 spraying motor A
50 spraying motor B
51 right front conner lamp
52 right headlamp
53 horn A
54 horn B
55 right front lever-shaped lamp
56 right front fog lamp
57 electric fan
58 outdoor temperature sensor
59 connected to chassis wire harness
anright central wire harness
60 connected to left central wire harness
61 connected to engine wire harness
Body Electric System
Wire Harness Distribution

BE-74
SF
8
1 connected to cab wire harness
2 left rear door lamp switch
3 door lamp at left rear door
4 electric rocker and lock-out device at left rear door
5 left rear sound box
6 controller for brush, door and window at rear door
7 connected to wire harness at tail door
8 left rear combination lamp
9 highly-mounted stop lamp
10 rear ceiling lamp11 rear brusher motor
12 right rear combination lamp
13 right rear sound box
14 front ceiling lamp
15 lamp for reading
16 electric rocker and lock-out device at right rear door
17 right rear door lamp
18 right rear door lamp switch
19 connected to cab wire harness
20 connected to protective box I
123
45
67 9
10
11
12
13 14
15
16 17
18
19
20
Cab Wire harness (continued)
Body Electric System
Wire Harness Distribution

AC-11Air-Conditioning System
Inspection On Refrigerant Quantity
Inspection on Refrigerant Quantity
1. Run the engine at the speed of 1500 r/m or so (the
atmospheric temperature should be above 35
);
2. Start the air-conditioner in the max cold air status for
several minutes;
3. Check the refrigerant quantity.
Watch the observation window on liquid tank.
Dr SF
SL SK SY SJ
liquid tank
liquid tankobservation window
observation window
No.
1
2
3
4
5
6
Symptoms
Refrigerant quantityRepairing approaches
Air bubble occurs in the observa-
tion window
No air bubble in observation win-
dow
No temperature difference between
the inlet and outlet of compressor
Obvious temperature difference be-
tween the inlet and outlet of compressor.
Observation window is in clear status
once the air-conditioner is turned off
There is refrigerant foam on observa-
tion window after the air-conditioner
is turned off, then the observation
window becomes clear.Insufficient
No, normal or redundant
No, or almost no
Normal or redundant
Redundant
NormalCheck to see whether there is leakage with the
gas leakage detector
Refers 3 and 4.
Vacuumize the system and inflate the
refrigerant, then check to see whether there is
leakage with the gas leakage detector.
Refer 5 and 6
Exhaust the redundant refrigerant until the speci-
fied quantity is satisfied.

AC-14Air-Conditioning System
Liquid Tank
Liquid Tank
Check to see whether there is leakage in observation window,
fusible plug and joints;
Conduct the inspection with the gas leakage detector and, if
necessary, repair or change the liquid tank.
Dismantle of Liquid Tank
1. Exhaust the refrigerant;
2. Tear down the two liquid pipes from the liquid tank;
Remark: the opened joint should be plugged with cork so as to
prevent the humid air from entering into the system.
3. Tear down the liquid tank from the tank bracket.
Mount of Liquid Tank
1. Mount the liquid tank on the liquid tank bracket;
Remark: the cover of joint should not be take down before
connecting the pipe;
2. Connect the two liquid pipes to the liquid tank;
Tightening moment
(See page AC-8)
3. Vacuumize the system and inflate the refrigerant in;
Vacuumizing time:
Dr SL SK SF SJ
Vacuumize for 20 min and main-
tain the pressure for 30min;
SY
Vacuumize for 30 min and maintain the pres-
sure for 30min.
4.
Dr
(600-650)g
SL
700
0g
SK SJ
560
0g
SF
(700-720)g
SY
850
0g
liquid pipe
condenser
liquid tank
liquid pipe
liquid pipe liquid pipe
liquid tankcondenser
SL SK SY SJ
Dr SF