mirror GREAT WALL FLORID 2008 User Guide
[x] Cancel search | Manufacturer: GREAT WALL, Model Year: 2008, Model line: FLORID, Model: GREAT WALL FLORID 2008Pages: 281, PDF Size: 43.97 MB
Page 203 of 281

Downloaded from www.Manualslib.com manuals search engine GWFLORID Maintenance Manual196
Head unit 36 PIN socket definition
PinPin definitionPinPin definitionPinPin definition
1Auxiliary audio ground cable13Navigator communication line
(head unit receive)25Rear right audio output (reserve)
2Auxiliary left audio input14Navigator communication line
(reserve)26Mid-audio output (reserve)
3Auxiliary right audio input15Digital ground cable27Super bass audio output (reserve)
4Digital ground cable16Navigator composite video signal28Audio ground cable (reserve)
5Auxiliary video input17Navigator red video signal29Background left audio output
(reserve)
6SV-6269:Karaoke control wire
SV-6268: NC18Digital ground cable30Background right audio output
(reserve)
7Power supply +19Navigator green video signal31Background video output 1
(reserve)
8Ignition diagnostic20Navigator blue video signal32Auxiliary audio input 2 (reserve)
9Navigator audio input21Front left audio output (reserve)33Digital ground cable (reserve)
10SV-6269:Microphone audio input
SV-6268: NC22Front right audio output (reserve)34Audio ground cable (reserve)
11Navigator audio ground cable23Audio ground cable (reserve)35Auxiliary left audio output 2
(reserve)
12Navigator communication line
(head unit send)24Rear left audio output (reserve)36Auxiliary right audio input 2
(reserve)
Karaoke box MINI8PIN socket
PinPin definition
1Karaoke control wire
2Microphone audio output
3Power supply +
4Microphone audio ground cable
5Auxiliary left audio output
6Auxiliary right audio output
7Auxiliary audio ground cable
8Power supply ground cable
876
345
21
PinPin definitionPinPin definition
31Brake diagnostic35Rearview mirror power supply
32Reverse diagnostic36Rearview mirror power supply ground
cable
33Disc changer video input (reserve)37Rearview mirror video input
34Video ground cable38Video ground cable
Page 207 of 281

Downloaded from www.Manualslib.com manuals search engine GWFLORID Maintenance Manual200
Equipment connection drawing
Navigator
Antenna
Yellow
AUX IN/Karaoke J/B AUX IN J/B
Red
Black
Yellow Green BlueBlue & white
Green & white
Pink
Reverse shift switch
Yellow
Rear view mirror power supply ground wire
CAMERA—B+
Rear view mirror power supply ground wire
CAMERA—GND
Rear view mirror audio input
CAMERA—VIDEO
Power amplifier control
P.CONT
Brake diagnosis
P.CONT
Reverse detectREVERSE
Rear view mirror power supply ground wire
AUX IN VIDEO
Page 248 of 281

Downloaded from www.Manualslib.com manuals search engine 241Vehicle Body
Front & Rear Window Glasses
Windshield removal
1. Use steel wire to strip the glass sealant from the four
sides of the windshield.
2. Remove the windshield and trim strip from the vehicle.
3. Remove the trim strip and inner rearview mirror from
the windshield.
4. Use a blade to remove the glass sealant on the end of
the glass.
5. Use a polisher to remove the glass sealant on the glass
window frame, and polish clean the glass sealant.
Rear window glass removal
1. Disconnect the battery's negative cable.
2. Disconnect the defogger electrical connector of the
rear window.
3. Use steel wire to strip the glass sealant off the rear
window glass.
4. Remove the rear window glass.
5. Use a blade to remove the glass sealant.
6. Use a polisher to remove the glass sealant on the
glass frame.
Rear window glass installation
1. Coat glass sealant primer on the rear door's sheet
metal seam and rear window glass.
2. Coat the rear window glass with glass sealant, glass
sealant height is 10±2 mm.
3. Install the rear window glass.
4. Use adhesive tape fix the rear window glass and back
door, and fix the rear window glass.
5. Connect the defogger electrical connector of the rear
window.
6. Connect battery's negative cable.
7. Remove the tape after the glass sealant has been on
24 hours.
Windshield installation
1. Install the trim strip and inner rearview mirror on the
windshield.
2. Coat the windshield frame and its edge with primer.
3. Use a glue gun to coat the windshield with glass
sealant, glass sealant height is 10±2 mm.
4 . U s e a d h e s i v e t a p e f i x t h e w i n d s h i e l d a n d t h e
windshield's outside sheet metal.
5. Remove the tape after the glass sealant has solidified
for 24 hours.
Windshield
Windshield trim strip
Inner rearview mirror
Defogger electrical connector
Rear window glass
Page 255 of 281

Downloaded from www.Manualslib.com manuals search engine GWFLORID Maintenance Manual248
Front door removal
1. Remove the front door inner decoration board.
(a) Remove the interior armrest screw and armrest.
(b) R e m o v e t h e d o o r i n s i d e h a n d l e s c r e w a n d i n s i d e
handle.
(c) Remove the electrical switch and pull out the wire
harness.
(d) Insert buckle screwdriver between the fixed buckle and
the door inner decoration board to pry them loose.
Caution: Before using a buckle screwdriver, make sure
to wrap its head in tape.
(e) Take down the door inner decoration board.
Front Door Assembly
Components
Front door triangular protector LH
Front door protector assembly LH
Front door armrest LH
Front door internal weatherstrip LH
Front door assembly LH
Front door lower hinge assembly LH
Front door retainer LH
Front door upper hinge assembly LH
Left external rearview mirror assembly
Front door window front guide rail assembly LH
Front door glass run LH
Front door window LH
Front door weatherstrip LH
Front door external weatherstrip LH
Front door lock assembly LH
Window regulator assembly
Front door window rear guide rail assembly LH
Front door armrest LH
Front door window
switch assembly LH
Front door protector LH