engine oil GREAT WALL HOVER 2006 Service Owner's Manual

CD Player and Air Conditioning System-17
Daily Maintenance of Air Conditioning System
In order to ensure normal operation of air conditioning system, maintenance and care services shall be frequently performed for the
air conditioning system. The daily maintenance of air conditioning system is illustrated as follows:
1. Inspect, wash and clean the condenser of air conditioning system, requiring that radiator pins are clean and there is no dirt
between the pins. After the car runs in the rain or on the muddy road, the fan of the condenser should be inspected to find
whether it bears the earth, sand, stone and etc, and remove them if any.
2. Check the quantity of the working media of the refrigerating system; when the compressor set works normally, observe the
liquid viewing glass, under the normal circumstance, there shall be not air bubbles in the glass.
3. Inspect the drive belt. The belt between the compressor and the engine should be tensioned.
4. Check if there is any abnormal noise or odor in the air conditioning system.
5. Check if the temperature difference between the air inlet and outlet of the compressor is normal.
6. Check if the hose of the refrigerating system is in an apparent good condition and connections of all joints are secure.
7. Check if the pipeline of the refrigerating system collides with other parts and components, and if there is any oil leakage trace
left at each joint.
8. Check if the circuit connection of the refrigerating system is secure and if there is an occurrence of short circuit and falling off
9. Check if fastening bolts of the compressor are firmly secured or broken. d. When connecting the pipe, apply little compressor oil to the O-ring and fasten the nut with two wrenches. Attention: never
spatter the compressor oil to the painted parts or the plastic components to avoid the corrosion. If these components are
spattered with the oil, please clean it immediately.
e. When connecting the pipe, please follow the torque listed in the following table to fasten the screws or the nuts:
Diameter of Pipe Fastening Torque (N·m)
￠8mm 12-15
￠16mm 30-35 30－35


At ends of each pipe the protective caps should be installed till the pipe is connected to the refrigerating system.
compressor oil fasten it by using two wrenches at the same time

Appendix B-13
Auto gear oil GL-5 140 Transmission L 1.4
For the exported
vehicle for extremely
hot areas
Auto gear oil GL-5 140 Transfer case L 2.7
For the exported
vehicle for extremely
hot areas
Auto gear oil GL-5 140 Rear axle L 2.9
For the exported
vehicle for extremely
hot areas
2.9L=5.14PTS
Auto gear oil GL-5 140 Front axle L 1.4
For the exported
vehicle for extremely
hot areas
1.4L=2.46PTS
Auto gear oil GL-5 75W/90 Front axle L 1.4
Auto gear oil GL-5 80W/90 Front axle L 1.4 1.4L=2.46PTS
Glass adhesive HV3 Front windshield glass L 0.6
Glass adhesive 7120 Backup door glass, side window
glass L 0.9
Clearance
adhesive LY-22 Luggage rack Kg Suitable
Liquid adhesive LY-609 Warming pipe, speed lever L 0.02
Windshield
washer Q35 Front and rear windows L 3
Refrigerant R134a Air-conditioning system Kg 0.73



















Non-metal Materials Consumption Table.

Name Brand, specification and
technical condition Utility Measuring
unit Quantity Note
Engine lubricating
oil SL 10W-40 Oil pan L 4.3 Available for 4G64S4M
engine
Engine lubricating
oil SL 5W-30 Oil pan L Suitable
Available for 4G64S4M
engine and exported
vehicles for extremely
cold areas.
Glass activator VP04604 Glass L Suitable
Lithium base
grease Grease HP-R Front axle,
chassis parts Kg Suitable
Industrial
Vaseline
Seat support,
accumulator
points
Kg Suitable

Appendix D-18
15 front cross stabilizer rod
-connecting bar bottom
arm bolt M10×1.25-8 63±5 39 brake petrol pipe joint M10×1.25 16
16 long longitudinal tie
connecting bolt M14×
1.5-10.9 200±20 40 safety belt body connecting bolt 7/16″-8.8
40±2
17 short longitudinal tie
front connecting bolt
M14×1.5-10.9 180±15 41 safety belt seat connecting bolt 7/16″-8.8 40±2
18 short longitudinal tie rear
connecting bolt M14×
1.5-10.9 200±20 42 body suspension connecting bolt M10×1.25-9.8 63±5
19 cross tie -carriage
connecting bolt M14×
1.5-10.9 200±20 43 Engine oil pan drain bolt 40±5
20 cross tie -rear axle fixing
nut M14×1.5-8 180±15 44 Transmission/transfer case refueling/drain bolt 30～35
21 rear cross stabilizer rod
-rear axle fixed bolt M8
×1.25-8.8 23±3 45 front drive axle refueling bolt M20×1.5 145±5
22 rear cross stabilizer rod
-connecting bar -carriage
bolt M10×1.25-8 63±5 46 Front drive axle drain bolt Rc1/2 30～35
23 standby tire bracket fixed
bolt 10×1.25-8.8 63±5 47 rear drive axle refueling/drain bolt M20×1.5 145±5
24 standby tire lifter fixed
bolt M8×1.25-8.8 25±3 48 Starter and wheel box connecting bolt 30±3