door lock GREAT WALL SO COOL 2006 Owner's Manual

BE-78
wire harness at left front door
Wire harness at right rear door is distributed in the same way as that at left rear door.
1 connected to cab wire harness
2 connected to cab wire harness
3 connected to cab wire harness
4 left external electric rear vision mirror
5 left front loudspeaker
6 left door lamp
7 electric rocker
8 left front lock-out device
9 rear vision mirror switch
10 rocker switch
11 connect to cab wire harness
12 electric rocker
13 left rear lock-out device
14 rocker switch
15 highly-mounted stop lamp16 bass speaker(top SY)
17 ceiling lamp
18 grounding wire(top SY)
19 lamp for reading
20 car door display
21 temperature display
22 connected to cab wire harness
23 connected to cab wire harness
24 right external electric rear vision mirror
25 right front loudspeaker
26 right door lamp
27 electric rocker
28 right front lock-out device
29 rocker switch
1
2
34
5
6
789 10
11
12
13141516 17
18 19
20
21 22
23
24
25
2627wire harness at right front door
roof wire harness
wire harness at left rear door
Top style SY SJ
Wire harness at four doors and body roof (continued)
2829
Body Electric System
Wire Harness Distribution

BE-79
SF
1 connected to protective box I
2 connected to protective box I
3 rear vision mirror
4 front door-lamp switch
5 rocker switch
6 rocker at front door Wire harness distribution at front left door, front right door, rear left door and rear right door are same with each other.
1 2345
6
7 891011
wire harness at front doorwire harness at rear door
Wire harness of four doors(continued)
Body Electric System
Wire Harness Distribution
7 lock-out device at front door
8 wire harness at central part
9 wire harness at central part
10 rocker at rear door
11 rocker switch

BE-81
SF
1 connected to left rear wire harness
2 connected to left rear wire harness
3 lock switch at left tail door
4 electro-heating gate at tail door
5 electro-heating gate at tail door
6 left license lamp7 electric rocker at tail door
8 right license lamp
9 lower limit switch at tail door
10 alarming switch at tail door
11 lock barrel at tail door
12 lock switch at right tail door 12
3
4
5
67
89
10
1112
Wire harness at tail door (continued)
Body Electric System
Wire Harness Distribution

B0-4Vehicle Body
Front Door
Front door
Element figure
(glass)
glasschannel
outer auchi
inner tri-angle trim panel
door limiting device
door hinge
indoor handle
seal strip on
door plate
electric switch
and panel
interior trim panel
of electric door
(Dr)
interior trim panel
of electric door
(SF) interior trim panel of
electric door
sleeve
snapping ring elevator handle
(SL SK SY SJ)
door lamp
inner clip
lower rear glass
guide track sliding channelsmall sliding track door lock assembly
lower front glass
guide track lock cliplock ringlock barreloutdoor handle
manual interior
trim panel(Dr) snapping ring
glass bracket and glass gasket
rear vision mirror

B0-5
Adjustment of front door
1. Adjust the car door in the front-back and vertical direction;
Adjust the car door under the condition that the bolts of body
side hinge are loosened.
2. Adjust the car door in left-right and vertical direction
Adjustment should be made after the bolts of side hinge of
body are loosened.
3. Adjust the clip of door lock:
(a) Check whether the car door assembly and the match of
door lock are adjusted correctly.
(b) Loosen the lock clip lightly to mount the screws and tap
the lock clip with hammer to adjust their positions.
(c) Screw off the fixing screws of lock clip.
Disassembly of front door
1. Tear down the elevator handle (Dr)
Pull out the snapping ring of spring with dishcloth and tear
down the elevator handle and the sleeve.
2. Tear down the indoor handle
3. Tear down the inner triangle trim panel;
Loosen the clip open with a screwdriver to tear down the inner
triangle trim panel.
Notice: before using the screwdriver, wrapping the
screwdriver head with adhesive strap.
4. Tear down the rear vision mirror;
Tear down the three screws and rear vision mirror. Vehicle Body
Front Door

B0-7
Change of Glass
(Dr SF)
1. Tear down the glass bracket with screwdriver or similar
tool;
2. Coat the black glue on the inside of glass bracket liner;
3. Tap the glass bracket with rubber hammer to encase it in.
(SL SK SY SJ)
1. Tear down the bolts on gear plate with pliers or similar
tool;
2. Tear down the bolts of glass bracket of car door to take
out the glass. Vehicle Body
Front Car Door170mm
Dr. SF
SL. SK. SY. SJ
9. Tear down t the lower rear glass guide track:
Tear down the bolts and guide track.
10. Tear down the lower front glass guide track;
Tear down the bolts and guide track.
11. Tear down the glass elevator:
(a) Tear down the two fixing bolts of small sliding track;
(b) Tear down the fixing bolts of three elevators (manually
operated)
Tear down the fixing bolts of four elevators. (electric)
(c) Tear down the elevator through the auxiliary hole.
12. Tear down the lock ring inside the vehicle;
Disconnect the control lever to tear down the lock ring inside
the vehicle.
13. Tear down the door lock and outdoor handle with lock
barrel;
(a) Disconnect the control lever from the outdoor handle
with lock barrel.
(b) Tear down the 3 bolts and door lock.
(c) Tear down the two bolts and outdoor handle with lock
barrel.
(d) Tear down the spring snapping ring and lock barrel.

B0-8
Assembly of Front Door
1. Coat the MP lubricant on the parts before mounting.
(a) Coat the MP lubricant on the sliding face and the gear of
glass elevator.
Notice: Do not plaster the MP lubricant on the spring of
glass elevator.
(b) Plaster the MP lubricant on the sliding face of door lock.
2. Mount the outdoor handle with lock barrel and the door
lock;
(a) Mount the lock barrel on the outdoor handle with spring
snapping ring;
(b) Use two bolts to mount the outdoor handle and the lock
barrel;
(c) Mount the door lock with three screws;
(d) Connect the outdoor handle to the control lever.
3. Mount the lock ring inside vehicle
Mount the lock ring inside of vehicle and connect the control
lever.
4. Mount the lower rear glass guide track,
5. Mount the lower front glass guide track;
6. Mount the glass elevator:
(a) Put in the elevator through the auxiliary hole;
(b) Mount on the three fixing bolts of elevator. (manually
operated)
Mount on the four fixing bolts of elevator (electric)
(c) Mount the small sliding track, and screw up the bolts of
small sliding track temporarily.
7. Mount the glass groove on car door;
8. Mount the car door and window glass;
Put the glass in the car door cavity, and then use two bolts to
fix the glass on the elevator. Vehicle Body
Front Door

B0-10
Rear Door (
)
Element Figure
glass
glass channel
Outer auchiglass bracket and glass gasket
door limiting
devicedoor hinge
electric switch
interior trim panel
of electric door (Dr)
interior trim panel
of electric door manual interior
trim panel
sleeve
snapping ring elevator handle door lamp inner cliplower rear glass
guide track
small sliding trackdoor lock assembly
lock clipoutdoor handle
lower dust
strip
indoor handle(Dr) lock ring
Dr SL SK SYVehicle Body
Rear Door
(SL,SY,SK)

B0-11Vehicle Body
Rear Door
Rear Door (
)
Element Figure
glass
glass channel
Outer auchi
glass bracket and
glass gasket
door limiting
device door hinge
electric switch
door lampinner cliplower rear glass
guide track
small
sliding
track door lock assemblyn
lock clipoutdoor handle
upper glass guide track
indoor handlelock ring quarter window glass
sliding
channel
SF

B0-12Vehicle Body
Rear Door
Rear door(
)
Element figure
glass
glass channel
outer auchi
door limiting devicedoor hinge
electric switch inner clipdoor lock assembly
lock clip
outdoor handlelock ring quarter
window glass
screw cap
glass supporter
indoor handle
SJ