Lock HONDA ACCORD 2003 CL7 / 7.G Repair Manual

µ
Ì ÎÌ
ÌÎ
Maint enance
4-cylinder Models
252
Visually inspect the following items:
Service at the indicated distance
or time whichever comes first.
miles x 1,000
km x 1,000
months
Tie rod ends, steering gear box, and boots
Suspension components
Driveshaft boots
Brake hoses and lines (including ABS)
All fluid levels and condition of fluids
Exhaust system
Fuel lines and connections
Lights and controls, vehicle underbody Inspect every 110,000 miles (176,000 km), otherwise adjust only if noisy
Every 110,000 miles (176,000 km)
See dust and pollen filter on page for replacement information under special driving conditions.
See information on maintenance and emissions warranty, last column, page . Every 15,000 miles (24,000 km) (Use normal schedule except in dusty conditions)
At 120,000 miles (192,000 km) or 10 years,
then every 60,000 miles (96,000 km) or 5 years Check oil and coolant at each fuel stop
1016
20323048 40645080 70
112 80
128 100160110176 130208140224 160256170272
Every 30,000 miles (48,000 km) or 2 years Every 5,000 miles (8,000 km) or 6 months
Every 10,000 miles (16,000 km) or 1 year
Inspect every 30,000 miles (48,000 km) or 2 years
Inspect every 10,000 miles (16,000 km) or 1 year
Lubricate every 10,000 miles (16,000 km) or 1 year Rotate tires every 10,000 miles (16,000 km)
Inspect every 10,000 miles (16,000 km) or 1 year
6096
90
144 120192 150240180288
At 60,000 miles (96,000 km) or 3 years, then every 30,000 miles (48,000 km) or 2 years Every 3 years (independent of mileage)
Replace engine oil
Replace engine oil filter
Check engine oil and coolant
Replace air cleaner element
Inspect valve clearance
Replace spark plugs
Inspect drive belt
Inspect idle speed
Replace engine coolant
Replace transmission fluid
Inspect front and rear brakes
Replace brake fluid
Check parking brake adjustment
Replace dust and pollen filter
Lubricate all hinges, locks, and latches
Rotate tires (Check tire inflation and condition at
least once per month) 72
60 84 96 108
12 24 36 48
M/T
A/T
249
:
: 300
Maintenance Schedule for Severe Conditions
——y

y
(yy

µ
µ
Ø Ø Ø Ø Ø ØØØØØØØØØØØØØØØØØØØØ
ÌÌ
Î
Î
Ì
Maint enance
4-cylinder Models
253
Canadian Owners
U.S. Owners A, B, C, D, E, F, G, H
AB C
D
EF
G
H
Use the Maintenance Schedule for Severe Conditions.
Refer to page to determine which schedule to use.
Service at the indicated distance or time, whichever comes first. Do the items in as required for each distance/time interval.
5,000 mi/8,000 km
10,000 mi/16,000 km
15,000 mi/24,000 km
20,000 mi/32,000 km/1 yr
25,000 mi/40,000 km
30,000 mi/48,000 km
35,000 mi/56,000 km
40,000 mi/64,000 km/2 yrs
45,000 mi/72,000 km
50,000 mi/80,000 km
55,000 mi/88,000 km
3yrs
60,000 mi/96,000 km/3 yrs
60,000 mi/96,000 km/3 yrs,
then replace every 30,000mi/
48,000 km/2yrs
65,000 mi/104,000 km
70,000 mi/112,000 km
75,000 mi/120,000 km
80,000 mi/128,000 km/4 yrs
85,000 mi/136,000 km
90,000 mi/144,000 km
90,000 mi/144,000 km, then
replace every 30,000 mi/
48,000 km/2 yrs
95,000 mi/152,000 km
100,000 mi/160,000 km/5 yrs
105,000 mi/168,000 km
110,000 mi/176,000 km
115,000 mi/184,000 km
6yrs
120,000 mi/192,000 km/6 yrs Do item in A.
Do items in A, B.
Do items in A, C.
DoitemsinA,B,D.
Do item in A.
DoitemsinA,B,C,E.
Do item in A.
DoitemsinA,B,D.
Do items in A, C.
Do items in A, B.
Do item in A.
Replace brake fluid (independent of mileage).
DoitemsinA,B,C,D,E,F. Replace automatic transmission fluid.
Do item in A.
Do items in A, B.
Do items in A, C.
DoitemsinA,B,D.
Do item in A.
DoitemsinA,B,C,E. Replace automatic transmission fluid.
Do item in A.
DoitemsinA,B,D.
Do items in A, C.
DoitemsinA,B,G.
Do item in A. Replace brake fluid (independent of mileage).
DoitemsinA,B,C,D,E,F. Replace engine oil.
Replace engine oil filter.
Inspect front and rear brakes.
Lubricate all hinges, locks, and latches.
Rotate tires (follow pattern on page 306).
Inspect tie rod ends, steering gear box, and boots.
Inspect suspension components.
Inspect drive shaft boots.
Replace air cleaner element.
Check parking brake adjustment.
Inspect brake hoses and lines (including ABS).
Inspect exhaust system.
Inspect fuel lines and connections.
Check all lights.
Inspect the underbody.
Inspect drive belt.
Replace dust and pollen filter .
Replace transmission fluid (M/T).
Inspect valve clearance.
Replace spark plugs.
Inspect idle speed.
248
See information on maintenance and emissions warranty, last
column, page .
See dust and pollen filter on page for replacement information
under special driving conditions.
:
:
249
300
Maintenance Schedule for Severe Conditions (listed by distance/time)
——yy
(yy

µ
Ì
Î Î Î
Î
Ì Ì
CONT INUED
6-cylinder Models
Maint enance257
Visually inspect the following items:
Service at the indicated distance
or time whichever comes first.
miles x 1,000
km x 1,000
months
Every 3,750 miles (6,000 km) or 6 months
Every 15,000 miles (24,000 km) (Use normal schedule except in dusty conditions) Check oil and coolant at each fuel stop
At 120,000 miles (192,000 km) or 10 years,
then every 60,000 miles (96,000 km) or 5 years
Inspect every 105,000 miles (168,000 km), otherwise adjust only if noisy
152412
304824457236
60964875
120 60 90
144
72 105168
84 120192
96
Replace engine oil, and oil filter
Check engine oil and coolant
Replace air cleaner element
Inspect valve clearance
Replace spark plugs
Replace timing belt and inspect water pump
Inspect drive belt
Replace engine coolant
Replace transmission fluid
Inspect front and rear brakes
Replace brake fluid
Check parking brake adjustment
Replace dust and pollen filter
Lubricate all hinges, locks and latches
Rotate tires (Check tire inflation and condition at
least once per month)
Tie rod ends, steering gear box, and boots
Suspension components
Driveshaft boots
Brake hoses and lines (including ABS)
All fluid levels and condition of fluids
Exhaust system
Fuel lines and connections
Lights and controls, vehicle underbody Every 7,500 miles (12,000 km) or 6 months
Every 3 years (independent of mileage)
Rotate tires every 7,500 miles (12,000 km)
Every 7,500 miles (12,000 km) or 6 months
See information on maintenance and emissions warranty, last column, page .
See timing belt on page for replacement information under special driving conditions.
See dust and pollen filter on page for replacement information under special driving conditions.
:
1:2: A/T
300 249
302
1
2
Maintenance Schedule for Severe Conditions
——y

y
(yy

µ
µ
Ø Ø Ø ØØØØØ Ø ØØØØØØØØØØØØØ
ÌÌ Î
Î
Ì
Î Î
6-cylinder Models
Maint enance258
Canadian Owners
U.S. Owners A, B, C, D, E
AB C
D E
Use the Maintenance Schedule for Severe Conditions.
Refer to page to determine which schedule to use.
3,750 mi/6,000 km
7,500 mi/12,000 km
11,250 mi/18,000 km
15,000 mi/24,000 km/1 yr
18,750 mi/30,000 km
22,500 mi/36,000 km
26,250 mi/42,000 km
30,000 mi/48,000 km/2 yrs
33,750 mi/54,000 km
37,500 mi/60,000 km
41,250 mi/66,000 km
3yrs
45,000 mi/72,000 km/3 yrs
48,750 mi/78,000 km
52,500 mi/84,000 km
56,250 mi/90,000 km
60,000 mi/96,000 km/4 yrs
60,000 mi/96,000 km/4 yrs,
then replace every 30,000mi/
48,000 km/2 yrs
63,750 mi/102,000 km
67,500 mi/108,000 km
71,250 mi/114,000 km
75,000 mi/120,000 km/5 yrs
78,750 mi/126,000 km Do item in A.
Do items in A, E.
Do item in A.
DoitemsinA,B,E.
Do item in A.
Do items in A, E.
Do item in A.
DoitemsinA,B,D,E.
Do item in A.
Do items in A, E.
Do item in A.
Replace brake fluid (independent of mileage).
DoitemsinA,B,E.
Do item in A.
Do items in A, E.
Do item in A.
DoitemsinA,B,D,E. Replace automatic transmission fluid.
Do item in A.
Do items in A, E.
Do item in A.
DoitemsinA,B,E.
Do item in A. Replace engine oil and oil filter.
Replace air cleaner element.
Lubricate all hinges, locks, and latches.
Check parking brake adjustment.
Inspect brake hoses and lines (including ABS).
Check all fluid levels, condition of fluids, and check
for leaks.
Inspect exhaust system.
Inspect fuel lines and connections.
Check all lights.
Inspect the underbody.
Replace spark plugs.
Inspect valve clearance. Replace timing belt and inspect water pump.
Inspect drive belt.
Replace dust and pollen filter .
Inspect front and rear brakes.
Rotate tires (follow pattern on page 306).
Inspect tie rod ends, steering gear box, and boots.
Inspect suspension components.
Inspect drive shaft boots.
Service at the indicated distance or time, whichever comes first. Do the items in as required for each distance/time interval.
248
See information on maintenance and emissions warranty, last
column, page .
See timing belt on page for replacement information under
special driving conditions.
See dust and pollen filter on page for replacement
information under special driving conditions.
Check engine oil and coolant at each fuel stop.
Check and adjust valve clearance, cold engine, only if noisy.
NOTE: :
1: 2: 249
302
300
1
2
Maintenance Schedule for Severe Conditions (listed by distance/time)
——y
y
(y
y

Always use Honda All Season
Antif reeze/Coolant Type 2. This
coolant is pre-mixed with 50 percent
antif reeze and 50 percent water. It
does not require any additional
mixing. If it is not available, you may
use another major-brand non-silicate
coolant as a temporary replacement.
Make sure it is a high-quality coolant
recommended f or aluminum engines.
However, continued use of any non-
Honda coolant can result incorrosion, causing the cooling
system to malf unction or f ail. Have
the cooling system f lushed and
ref illed with Honda antif reeze/
coolant as soon as possible.
If the reserve tank is completely
empty, you should also check the
coolant level in the radiator.
Make sure the engine and radiator
are cool.
Turn the radiator cap counter-
clockwise, without pressing down
on it, until it stops. This relieves
any pressure remaining in the
cooling system.
Remove the radiator cap by
pushing down and turning
counterclockwise.
1. 2. 3.
CONT INUED
Cooling Syst em
Maint enance273
6-cylinder models RESERVE TANK RADIATOR CAP
4-cylinder modelsRemoving the radiator cap
while the engine is hot can
cause the coolant to spray out,
seriously scalding you.
Always let the engine and
radiator cool down before
removing the radiator cap.
——yy
(yy

Thecoolingsystemshouldbe
completely drained and ref illed with
new coolant according to the time
and distance recommendations in
the maintenance schedule. Only use
Honda All Season Antif reeze/
Coolant Type 2. Use of any non-
Honda coolant or plain water can
result in corrosion and deposits in
the cooling system.
Draining the coolant requires access
to the underside of the car. Unless
you have the tools and knowledge,
you should have this maintenance
done by a skilled mechanic.Openthehood.Makesurethe
engine and radiator are cool to the
touch.
Turn the ignition ON (II). Turn
the temperature control dial all the
way clockwise. Turn off the
ignition and remove the key.Turn the ignition ON (II). Make
sure the DUAL indicator is off.
Turn the temperature control dial
to 90°F (32°C). Turn of f the
ignition and remove the key.
Remove the radiator cap.
1.
2.
CONT INUED
On cars with Manual A/COn car with AUTO A/C
Replacing Engine Coolant
Cooling Syst em
Maint enance275
4-cylinder models
6-cylinder models
——yy
(yy

The air cleaner element should be
cleaned or replaced according to the
time and distance recommendations
in the maintenance schedule.
Clean the air cleaner element by
blowing compressed air through it in
the opposite direction to normal air
f low. If you do not have access to
compressed air (such as a service
station), ask your Honda dealer to do
this service.
Follow the replacement procedure
for removal and reinstallation.
Always use Honda Power Steering
Fluid. If it is not available, you may
use another power steering f luid as
an emergency replacement.
However, continued use can cause
increased wear and poor steering in
cold weather. Have the power
steering system f lushed and ref illed
with Honda PSF as soon as possible.
A low power steering f luid level can
indicate a leak in the system. Check
the f luid level f requently and have
the system inspected as soon as
possible.
A ir Cleaner Element
Cleaning (Severe Condit ions)
Power Steering, A ir Cleaner Element
Maint enance286
T urning the steering wheel to f ull lef t
or right lock and holding it there can
damage the power steering pump.
——yy
(yy

Clean up any dirt and oil that have
collected around the ignition coils.
Use a wrench to remove the bolt
holding the ignition coil. Pull the
ignition coil up slightly.
Disconnect the wire connector
f rom the ignition coil by pushing
on the lock tab and pulling on the
connector. Pull on the plastic
connector, not the wires.Remove the ignition coil.
Remove the spark plug with
a f ive-eighths inch (16 mm) spark
plug socket.
Torque the spark plug. (If you do
not have a torque wrench, tighten
the spark plug two-thirds of a turn
after it contacts the cylinder head.)
Tightening torque:
Put the new spark plug into the
socket, then screw it into the hole.
Screw it in by hand so you do not
crossthread it.
5.
2. 4.
3.
6. 7.8.
Spark Plugs (4-cylinder Models)
Maint enance290
BOLT CONNECTOR
IGNITION COIL
LOCK TAB
13 lbf·ft (18 N·m , 1.8 kgf·m)
——yy
(yy

Install the ignition coil into the
hole.
Connect the wire connector to the
ignition coil. Make sure it locks in
place.
Push the ignition coil down all the
way. Install the bolt.
Repeat this procedure f or the
other three spark plugs.
Reinstall the coil cover, and
tighten the f our nuts.The spark plugs in your car are a
special iridium-tipped design f or
longer lif e. The spark plugs should
be replaced according to the distance
recommendation in the maintenance
schedule.
9.
10. 11. 12.13. NGK:
DENSO:
NGK:
DENSO:
On some models
CONT INUED
Specif ications: Spark Plugs (6-cylinder Models)
Spark Plugs (4-cylinder Models), Spark Plugs (6-cylinder Models)
Maint enance291
IZFR6K-11
SKJ20DR-M11 IZFR6K-13
SKJ20DR-M13
Tighten the spark plugs caref ully. A
spark plug that is too loose can
overheat and damage the engine.
Overtightening can cause damage to
the threads in the cylinder head.
——yy
(yy

Disconnect the wire connector
f rom the ignition coil by pushing
on the lock tab and pulling on the
connector. Pull on the plastic
connector, not the wires.Remove the spark plug with
a f ive-eighths inch (16 mm) spark
plug socket.
Use a wrench to remove the
hexagonsocketheadcapbolt
holding the ignition coil. Remove
the ignition coil by pulling it
straight out.
Loosen the two holding clips by
turning the heads one-quarter turn
counterclockwise with a f lat-tipped
screwdriver. Remove the cover on
the f ront cylinder bank by pulling
it straight up. Cleanoffanydirtandoilthathas
collected around the ignition coil.
1.
2. 3.4. 5.
Replacement
Spark Plugs (6-cylinder Models)
Maint enance292
HOLDING CLIP CONNECTOR
HEXAGON SOCKET HEAD CAP BOLT
IGNITION COIL
——y
y
(yy