bulb HONDA ACCORD 2004 CL7 / 7.G Owners Manual

The lef t or right turn signal indicator
blinks when you signal a lane change
or turn. If the indicators do not blink,
or if they blink rapidly, it usually
means one of the turn signal bulbs is
burned out (see pages and ).
Replace the bulb as soon as possible,
since other drivers cannot see that
you are signaling.
WhenyouturnontheHazard
Warning button, both turn signal
indicators blink. All turn signals on
the outside of the vehicle should
flash.This indicator reminds you that the
exterior lights are on. It comes on
when the light switch is in either the
or position. If you turn the
ignition switch to ACCESSORY (I)
or LOCK (0) without turning of f the
light switch, this indicator will
remain on. A reminder chime will
also sound when you open the driver’s
door.
This indicator comes on as a
reminder that you must ref uel soon.
231 233
Turn Signal and
Hazard Warning
Indicators
Lights On Indicator Low Fuel Indicator
Instrument Panel L ights
Inst rument s and Cont rols65
LOW FUEL INDICATOR
 — — y

y
(
 y  y

This section also includes
Maintenance Schedules f or normal
driving and severe driving conditions,
a Maintenance Record, and instruc-
tions f or simple maintenance tasks
you may want to take care of
yourself .
If you have the skills and tools to per-
f orm more complex maintenance
tasks on your Honda, you may want
to purchase the Service Manual. See
page f or inf ormation on how to
obtain a copy, or see your Honda
dealer.
This section explains why it is
important to keep your vehicle well
maintained and how to f ollow basic
maintenance saf ety precautions.
......................
Maintenance Saf ety . 200
.................
Maintenance Schedule . 201
............
Servicing Your Vehicle . 202
Owner’s Maintenance
...................................
Checks . 203
.....................
4-cylinder Models . 204
.....................
6-cylinder Models . 206
....................
Maintenance Record . 208
..............................
Fluid Locations . 212
........................
Adding Engine Oil . 214
.......
Recommended Engine Oil . 214
..............................
Synthetic Oil . 215
................
Engine Oil Additives . 215
.........
Changing the Oil and Filter . 216
....................
Windshield Washers . 218
..............................
Engine Coolant . 219
............
Adding Engine Coolant . 219
.......................
Transmission Fluid . 221
Automatic .........................
Transmission . 221
5-speed Manual .........................
Transmission . 224
................
Brake and Clutch Fluid . 225
................................
Brake Fluid . 225
...............................
Clutch Fluid . 226
....................
Power Steering Fluid . 226 ....................................
Timing Belt . 227
....................................
Hood Latch . 227
.............................................
Lights . 228
........................
Replacing Bulbs . 228
.........................................
Seat Belt . 235
.....................................
Floor Mats . 235
..................
Dust and Pollen Filter . 235
.................................
Wiper Blades . 236
...............................................
Tires . 238
......................................
Inf lation . 238
..........................
Tire Inspection . 240
.....................
Tire Maintenance . 240
.............................
Tire Rotation . 241
.........................
Replacing Tires . 241
......................
Wheels and Tires . 242
..........................
Winter Driving . 242
.............................
Snow Tires . 242
............................
Tire Chains . 243
................
Checking Your Battery . 244
.............................
Vehicle Storage . 246
291
Maintenance
Maint enance199
 — — y

y
(
 y  y

Theheadlightswereproperlyaimed
when your vehicle was new. If you
regularly carry heavy items in the
trunk or pull a trailer, readjustment
may be required. Adjustments
should be perf ormed by a Honda
technician or other qualif ied
mechanic.Your vehicle has two bulbs on each
side, f our in total. Make sure you are
replacing the bulb that is burned out.
Your vehicle uses halogen headlight
bulbs. When replacing a bulb, handle
it by its plastic case and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
Lights
Maint enance
Headlight A iming Replacing a Headlight Bulb
228
NOTE:
Halogen headlight bulbs get
very hot when lit. Oil, perspiration, or a
scratch on the glass can cause the bulb
to overheat and shatter.
 — — y
 y
(
 y 
y

CONT INUED
Open the hood. To change a bulb
on the passenger’s side, undo the
two fasteners and remove the air
intake cover.Remove the electrical connector
f rom the bulb by squeezing the
connector to unlock the tab, then
slide the connector of f the bulb.Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
Install the new bulb and turn it
one-quarter turn clockwise to lock
it in place.
1.
3.
2.
4.
Lights
Maint enance
High Beam Headlight
229
FASTENERS
4-cylinder models 6-cylinder models TAB
BULB
AIR INTAKE
COVER AIR INTAKE
COVER
FASTENERS
4-cylinder models
 — — y
 y
(
 y y

Push the electrical connector onto
the bulb.To change the passenger’s side
bulb, start the engine, turn the
steering wheel all the way to the
lef t, and turn of f the engine. To
change the driver’s side bulb, turn
the steering wheel to the right.Pull the inner f ender cover away
f rom the f ender and bumper.
Remove the bulb by turning it
approximately one-quarter turn
counterclockwise.
Remove the electrical connector
fromthebulbbysqueezingthe
connector to unlock the tab, then
slide the connector of f the bulb.
Use a f lat-tipped screwdriver to
remove the two holding clips f rom
the inner f ender.
Turn on the headlights to test the
new bulb.
(Passenger’s side)
Reinstall the air intake cover.
Reinstall the two fasteners and
secure them by pushing on the
heads until they lock.
6.
5.
3. 4. 5.
1. 2.
7.
Lights
Maint enance
L ow Beam Headlight
230
HOLDING CLIPS
TAB BULB
6-cylinder models BULB
 — — y
 y
(
 y y

Install the new bulb and turn it
one-quarter turn clockwise to lock
it in place.
Push the electrical connector onto
the bulb.
Put the inner f ender cover in place.
Install the two holding clips. Lock
each one in place by pushing on
the center.
Turn on the headlights to test the
new bulb.
Use a f lat-tipped screwdriver to
remove the two holding clips f rom
the inner f ender.
To change the passenger’s side
bulb, start the engine, turn the
steering wheel all the way to the
lef t, and turn of f the engine. To
change the driver’s side bulb, turn
the steering wheel to the right.
Pull the inner f ender cover away
f rom the f ender and bumper.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
1.
3.
2. 4.
8.
7.
6. 9.
CONT INUED
Lights
Maint enance
Replacing the Front Side Marker/
Turn Signal and Parking L ightBulb
231
HOLDING CLIPS
BULB
 — — y
 
y
(
 y y

To remove the burned out bulb,
push it in and turn it
counterclockwise until it unlocks.
Install the new bulb and turn it
clockwise to lock it in place.
Insert the socket into the
headlight assembly. Turn it
clockwise to lock it in place.
Testthelightstomakesurethe
new bulb is working.
Put the inner f ender cover in place.
Install and lock each holding clip
bypushingonthecenter.
5. 6. 7. 8. 9.
Lights
Maint enance232
 — — y
  y
(
 y y

Open the trunk.
Remove the light assembly cover
by pulling its outside edge.
Remove the socket by turning it
one-quarter turn counterclockwise
and pull the bulb straight out of its
socket.Push a new bulb straight into the
socket until it bottoms, and
reinstall the socket into the light
assembly by turning it clockwise
until it locks.
Open the trunk.
Remove the trim clips f rom the
right or lef t corner of the trunk lid
trim by caref ully prying them
using a small, f lat-tip screwdriver
wrapped with tape.
Testthelightstomakesurethe
new bulb is working.
Reinstall the light assembly cover.
1. 3.
2. 4. 5.
1. 2.
6.
6-cylinder models
CONT INUED
Lights
Maint enance
Replacing Rear Bulbs
(in Fenders)
Replacing Rear Bulbs
(in T runk L id)
233
BULBS
COVER SOCKETS
TRIM CLIPS
 — — y
 y
(
 y y

Caref ully bend back the corner of
the trunk lid trim to expose thebulbs.
Remove the socket by turning it
one-quarter turn counterclockwise
and pull the bulb straight out of its
socket.Install a new bulb into the socket
and reinstall the socket into the
light assembly.
Open the trunk and remove the
socket f rom the light assembly by
turning it one-quarter turn counter-
clockwise.
Remove the burned-out bulb by
pulling it straight out of the socket.
Install the new bulb and reinstall
the socket.
Press the trim clips back into their
holes.
Push the trunk lid trim back into
position.
Test the lights.
3. 4. 5.6. 7.1. 2. 3.
8.
Lights
Maint enance
Replacing a High-mount Brake
Light Bulb
234
BULBS
SOCKETS BULBS SOCKETS
BULBSOCKET
 — — y
 y
(
 y y

CONT INUED
....................................
Accessories . 171
ACCESSORY (Ignition Key
.......................................
Position) . 82
.............
Accessory Power Socket . 107
....................
Additives, Engine Oil . 215
.....................................
Airbag (SRS) . 9
..........
Airbag System Components . 22
............................
Air Conditioning . 110
.........................................
Usage . 115
.......................
Air Pressure, Tires . 239
.......................
Alcohol in Gasoline . 280
Anti-lock Brakes (ABS)
................................
Description . 189
...............................
Indicator . 63, 190
...................................
Operation . 188
.
Anti-thef t Steering Column Lock . 82
........
Audio System . 122, 130, 132, 140
.............
Automatic Speed Control . 155
..............
Automatic Transmission . 182
..........................
Capacity, Fluid . 274
.......................................
Shif ting . 182
.
Shif t Lever Position Indicator . 182
................
Shif t Lever Positions . 182
....................
Shif t Lock Release . 185 Battery
Charging System ...........................
Indicator . 62, 260
............................
Jump Starting . 255
..............................
Maintenance . 244
............................
Specif ications . 275
..............................
Bef ore Driving . 163
..........................................
Belts, Seat . 8
.........................
Beverage Holders . 107
Brakes
...........
Anti-lock System (ABS) . 189
.............
Break-in, New Linings . 164
....................
Bulb Replacement . 233
...........................................
Fluid . 225
.......................................
Parking . 104
.........................
System Indicator . 62
........................
Wear Indicators . 188
.............................
Braking System . 188
........................
Break-in, New Car . 164
..
Brightness Control, Instruments . 76
........................
Brights, Headlights . 74
Bulb Replacement
..............................
Brake Lights . 233
................
Front Parking Lights . 231 .................................
Headlights . 228
.........
High-mount Brake Light . 234
............................
Specif ications . 275
...............................
Trunk Light . 233
....................
Turn Signal Lights . 231
..............................
Bulbs, Halogen . 228
............................
Capacities Chart . 274
.............
Carbon Monoxide Hazard . 56
.............................
Carrying Cargo . 173
..............
CAUTION, Explanation of . ii
...................................
CD Changer . 132
..............................
CD Player . 130, 131
........................
CD Pocket, Center . 106
........................
Certif ication Label . 272
............................................
Chains . 243
....................
Changing a Flat Tire . 249
Changing Oil
........................................
How to . 216
.............................
When to . 204, 206
...
Charging System Indicator . 62, 260
............
Checklist, Bef ore Driving . 178
Index
AB
C
I
 — — y

 y
(
 y y