diagram HONDA ACCORD 2010 8.G Owners Manual

Also check the combined f use box in
the under-hood f use box.
If something electrical in your
vehicle stops working, the first thing
youshouldcheckforisablownfuse.
Determine f rom the chart on pages
, and , or the diagram on
thefuseboxlidorthefuselabel,
which f use or f uses control that
component. Check those f uses f irst,
but check all the f uses bef ore
deciding that a blown f use is not the
cause. Replace any blown f uses and
check if the device works. Check each of the large f uses in
the under-hood f use box by
looking at the wire inside.
Removing these f uses requires a
Phillips-head screwdriver.
Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are of f .
On the under-hood and passenger’s
side interior f use boxes, remove
the cover f rom each f use box. 3.
1. 2. 372 373 374
CONT INUED
Fuses
Checking and Replacing Fuses
T aking Care of t he Unexpect ed
369
FUSE
BLOWN BLOWN
——
y

y
)yy
Table of Contents

µ
Thediagramsinthissectiongive
you the dimensions and capacities of
your vehicle and the locations of the
identif ication numbers. It also
includes inf ormation you should
know about your vehicle’s tires and
emissions control systems.
................
Identif ication Numbers . 378
Specif ications
..................
(4-cylinder models) . 380
Specif ications ...............................
(V6 models) . 382
DOT Tire Quality Grading ..........................
(U.S. Vehicles) . 384
.................................
Tire Labeling . 386
Tire Pressure Monitoring System
(TPMS) Required Federal ............................
Explanation . 388
.......................
Emissions Controls . 390
..
Three Way Catalytic Converter . 392
........................
Emissions Testing . 393
T echnical Inf ormation
T echnical Inf ormation
377