display HONDA ACCORD 2023 User Guide

uuGauges and Driver Information Interface uGauges
106
Instrument Panel
Shows the outside temperature in Fahr enheit (U.S.) or Celsius (Canada).
■Adjusting the outside temperature display
Adjust the temperature readi ng by up to ±5°F or ±3°C if the temperature reading
seems incorrect.
Shows certain detected traffic signs while driving.
If speed limit warning is activated, the si gn icon blinks when the maximum speed of
the traffic sign detected is exceeded by a threshold, when compared with the vehicle
speed.
2 Traffic Sign Recognition System P. 390
■Outside Temperature
■Traffic Sign Recognition System
1Outside Temperature
The temperature sensor is in the front bumper.
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
1Adjusting the outside temperature display
You can adjust the temperature reading.
2 Vehicle Settings P. 126
1Traffic Sign Recognition System
The default speed limit wa rning threshold is the
maximum speed of the traffic sign detected.
You can adjust the threshol d for speed limit warning.
2 Vehicle Settings P. 126
23 ACCORD 4D US PET MAP-3130A6000_01.book 106 ページ ２０２２年１０月１９日　水曜日　午前１１時４９分

107
uuGauges and Driver Information Interface uGauges
Instrument Panel
Shows the current mode for ACC with Low Speed Follow, LKAS, and Traffic Jam
Assist.
2 Adaptive Cruise Control (ACC) with Low Speed Follow P. 342
2 Lane Keeping Assist System (LKAS) P. 362
2 Traffic Jam Assist P. 373
■Current Mode for ACC with Low Speed Follow, the LKAS,
and Traffic Jam Assist1 Current Mode for ACC with Lo w Speed Follow, the LKAS, and
Traffic Jam Assist
When you set speed for ACC with Low Speed Follow
or cruise control, a set speed mark will be displayed
on the speedometer.
Set
Speed
23 ACCORD 4D US PET MAP-3130A6000_01.book 107 ページ ２０２２年１０月１９日　水曜日　午前１１時４９分

108
uuGauges and Driver Information Interface uDriver Information Interface (Left Side Area)
Instrument Panel
Driver Information Interface (Left Side Area)
Shows the current mode for audio and phone information, etc.
2 Audio Remote Controls P. 209
2 Bluetooth ® HandsFreeLink ® P. 265
Shows the clock.
■Clock1 Clock
You can adjust the time manually and change the
clock display to show the 12 hour clock or 24 hour
clock. 2 Clock P. 136
You can choose whether the clock is displayed on the
driver information interface. 2 Customize Display P. 109
23 ACCORD 4D US PET MAP-3130A6000_01.book 108 ページ ２０２２年１０月１９日　水曜日　午前１１時４９分

Continued109
uuGauges and Driver Information Interface uDriver Information Interface (Left Side Area)
Instrument Panel
■Arrange audio source on the left side area
You can choose which sources to display on the audio source screen. 1.Roll the left selector wheel until Customize
display is selected, then press the left
selector wheel.
2. Roll the left selector wheel to scroll to select
Hide/show , then press the left selector
wheel.
3. Roll the left selector wheel to scroll
between audio sources, then press the left
selector wheel to check or uncheck them.
■Customize Display
1Arrange audio source on the left side area
When you customize settings, shift to
(P.
23 ACCORD 4D US PET MAP-3130A6000_01.book 109 ページ ２０２２年１０月１９日　水曜日　午前１１時４９分

110
uuGauges and Driver Information Interface uDriver Information Interface (Left Side Area)
Instrument Panel
■Turn the displaying on the left side area on and off
You can select whether the current audio information and clock appear on the left
side area. 1.Roll the left selector wheel until Customize
display is selected, then press the left
selector wheel.
2. Roll the left selector wheel to scroll to select
Display content , then press the left
selector wheel.
3. Roll the left selector wheel to scroll to select
your desired settings, then press the left
selector wheel.
23 ACCORD 4D US PET MAP-3130A6000_01.book 110 ページ ２０２２年１０月１９日　水曜日　午前１１時４９分

111
uuGauges and Driver Information Interface uDriver Information Interface (Right Side Area)
Continued
Instrument Panel
Driver Information Interfa ce (Right Side Area)
The driver information interface shows information such as the estimated travelable
distance and fuel economy of the vehicle. It also displays messages such as warnings
and other helpful information.
When a warning message displays, please check the message and contact a dealer
to have the vehicle inspected if necessary. Please refer to the pages below if the
Engine oil pressure low or Engine temperature too hot message is displayed.
2If the Engine oil pressure low Warning Appears P. 488
2 Overheating P. 486
23 ACCORD 4D US PET MAP-3130A6000_01.book 111 ページ ２０２２年１０月１９日　水曜日　午前１１時４９分

112
uuGauges and Driver Information Interface uDriver Information Interface (Right Side Area)
Instrument Panel
Roll the right selector wheel to view different types of content.
■Switching the Display1Switching the Display
You can add or delete the meter contents.
2 Gauge Display Settings P. 123
Right Selector
Wheel
No ContentMaintenance
P. 120
Safety Support
P. 121
Vehicle Settings
P. 126 Vehicle Stability
Assist Mode
P. 122 Brightness
Setting
P. 122
Warning Messages
P. 125
Range/Fuel/
Trip Meter
P. 113 Driver Attention
Monitor
P. 117
Speed/Time/
Trip Meter
P. 115
Gauge Display
Settings
P. 123 Seat Belts
P. 120
23 ACCORD 4D US PET MAP-3130A6000_01.book 112 ページ ２０２２年１０月１９日　水曜日　午前１１時４９分

113
uuGauges and Driver Information Interface uDriver Information Interface (Right Side Area)
Continued
Instrument Panel
Press the right selector wheel to switch between trip meter A and trip meter B.
■Trip meter
Shows the total number of miles or kilomete rs driven since the last reset. Meters A
and B can be used to measure two separate trips.
Resetting a trip meter
To reset the trip meter, display it, press and hold the right sele ctor wheel, and then
select Reset.
u The trip meter is reset to 0.0.
■Range/Fuel/Trip Meter
Trip Meter A Range
Average Fuel Economy
Instant Fuel
Economy Trip Meter B
23 ACCORD 4D US PET MAP-3130A6000_01.book 113 ページ ２０２２年１０月１９日　水曜日　午前１１時４９分

uuGauges and Driver Information Interface uDriver Information Interface (Right Side Area)
114
Instrument Panel
■Average fuel economy
Shows the estimated average fuel economy of each trip meter in mpg or l/100 km.
The display is updated at set intervals. When a trip meter is reset, the average fuel
economy is also reset.
■Instant fuel economy
Shows the instant fuel economy as a bar graph in mpg or l/100 km.
■Range
Shows the estimated distance you can trave l on the remaining fuel. This estimated
distance is based on the vehicle’s current fuel economy.
1 Average fuel economy
You can change when to reset the average fuel
economy.
2 Vehicle Settings P. 126
1Range
The driving range displayed is only an estimate and
may differ from the actual distance the vehicle can
travel.
23 ACCORD 4D US PET MAP-3130A6000_01.book 114 ページ ２０２２年１０月１９日　水曜日　午前１１時４９分

Continued117
uuGauges and Driver Information Interface uDriver Information Interface (Right Side Area)
Instrument Panel
The Driver Attention Monitor analyzes steering inputs to determine if the vehicle is
being driven in a manner consistent with drowsy or inattentive driving. If it
determines that the vehicle is being driven in such a manner, it will display the
degree of the driver’s attention on the driver information interface.
When you select Driver Attention Monitor on
the driver information in terface, bars on it
light up in white to indicate the degree of the
driver’s attention.
2 Switching the Display P. 112
■Driver Attention Monitor1Driver Attention Monitor
The Driver Attenti on Monitor cannot always detect if
the driver is tired or inattentive.
Regardless of the system’s feedback, if you are
feeling tired, stop in a safe location and rest for as
long as needed.
Driver Information Interface
Right Selector
Wheel
Level
23 ACCORD 4D US PET MAP-3130A6000_01.book 117 ページ ２０２２年１０月１９日　水曜日　午前１１時４９分