homelink HONDA ACCORD COUPE 2001 CF / 6.G Owners Manual

Instruments and Controls

This section gives information about
the controls and displays thatcontribute to the daily operation of

your Honda. All the essential
controls are within easy reach.

Control Locations............................ 52

Indicator Lights................................ 53

Gauges.............................................. 58
Speedometer................................ 58

Tachometer.................................. 58

Odometer...................................... 58

Trip Meter.................................... 59
Temperature Gauge.................... 59
Fuel Gauge................................... 59

Maintenance Required
Indicator.................................... 60

Controls Near the Steering Wheel........................................ 61
Headlights.................................... 62
Automatic Lighting Off Feature...................................... 63
Daytime Running Lights............. 63 Instrument Panel Brightness..... 63
Turn Signals................................. 64
Windshield Wipers...................... 64
Windshield Washers................... 66
Hazard Warning........................... 66
Rear Window Defogger.............. 66

Steering Wheel Adjustment....... 67

Steering Wheel Controls ................ 68 Cruise Control.............................. 68
Remote Audio Controls .............. 70
Keys and Locks................................ 71
Keys...............................................71

Immobilizer System..................... 72
Ignition Switch............................. 73
Door Locks................................... 74
Power Door Locks....................... 75
Remote Transmitter.................... 76Childproof Door Locks............... 80
Trunk............................................ 80 Inside Trunk Opener................... 82
Glove Box..................................... 82

HomeLink Universal Transmitter......... 83

Seat Adjustments............................. 88
Front Seat Adjustments.............. 88

Driver's Seat Manual Height
Adjustment............................... 89
Driver's Seat Power Height

Adjustment............................... 89

Driver's Seat Full Power
Adjustments............................. 90

Driver's Lumbar Support............ 91
Front Passenger's Seat
Adjustments............................. 92

Head Restraints........................... 92

Folding Rear Seat........................ 93
Rear Seat Armrest....................... 94
Trunk Pass-through Cover......... 95

Seat Heaters..................................... 96

Power Windows............................... 97

Moonroof.......................................... 98

Mirrors.............................................. 99
Adjusting the Power Mirrors... 100

Parking Brake................................ 101

Digital Clock................................... 102
Console Compartment.................. 103

Coin Box......................................... 103

Beverage Holder............................ 104

Sun Visor......................................... 105

Vanity Mirror................................. 105
Sunglasses Holder......................... 106

Accessory Power Socket.............. 106
Interior Lights................................ 107

Instruments and Controls

HomeLink Universal Transmitter
On all V6 models

The HomeLink Universal
Transmitter built into your car can be programmed to operate remotely-controlled devices around your home,such as garage doors, lighting, or
home security systems. It can replace up to three remote
transmitters.

Customer Assistance

If you have problems with training
the HomeLink Universal

Transmitter, or would like
information on home products that
can be operated by the transmitter,

call (800) 355-3515. On the Internet,

go to www.homelink.jci.com. Important Safety Precautions
Always refer to the operating instructions and safety information
that came with your garage dooropener or other equipment you
intend to operate with the HomeLink Universal Transmitter. If you do not
have this information, you should contact the manufacturer of the
equipment.
While training or using the transmitter, make sure you have aclear view of the garage door or gate,
and that no one will be injured by its
movement.
General Information
If you are training the transmitter tooperate a garage door or gate, it is
recommended that you unplug the
motor for that device during training. Repeatedly pressing the remote
control button could burn out the
motor. The HomeLink transmitter stores
the code in a permanent memory.
There should be no need to retrain the transmitter if your car's battery
goes dead or is disconnected.
If your garage door opener was
manufactured before April 1982, you
may not be able to program the
HomeLink Universal Transmitter to
operate it. Garage door openers
manufactured before that date do
not have a safety feature that causes
them to stop and reverse if an
obstacle is detected during closing,
increasing the risk of injury. If you
have questions, call (800) 355-3515.
Instruments and Controls

HomeLink Universal Transmitter

Training the Transmitter Before you can use the HomeLink
Universal Transmitter to operatedevices around your home, it must
"learn" the proper codes. For
example, to train the transmitter to open and close the garage door:
Before you begin — If you just took

delivery of your vehicle and have not
trained any of the buttons in the
HomeLink transmitter before, you should erase any previously learned
codes before training the first button.
To do this, press and hold the two outside buttons on the HomeLink
transmitter for about 20 seconds
until the red light flashes. Release the buttons, then proceed to Step 1.
If you are training the second or
third buttons, go directly to Step 1.
1. Unplug the garage door opener motor from the house current.
2. Hold the end of the garage door opener remote control 2 to 5
inches from the HomeLink
transmitter. Make sure you are
not blocking your view of the red
light in the transmitter. 3. Select the transmitter button you
want to train.
4. Press the button on the remote control and the button on the
transmitter at the same time. Hold down both buttons.
Instruments and Controls

HomeLink Universal Transmitter

Canadian Owners:

The remote control you are training from may stop transmitting after two
seconds. This is not long enough for

the HomeLink transmitter to learn
the code. Release and press the

button on the remote control every
two seconds until the transmitter has

learned the code.

5. The red light in the transmitter should begin flashing. It will flash
slowly at first, then rapidly.
6. When the red light flashes rapidly,
release both buttons. The

transmitter should have learned

the code from the remote control.
7. Plug in the garage door opener motor, then test the transmitter
button by pushing it. It should operate the garage door.
If the button does not work, repeat
this procedure to train it again. If it still does not work, you may have a
variable or rolling code garage door opener. Test this by pressing
and holding the HomeLink
transmitter button you just trained. If the red light blinks for twoseconds, then stays on, you have a
rolling code garage door opener.
You may be able to verify this with the manufacturer's documentation. Go to "Training With a Rolling

Code System."

8. Repeat these steps to train the other two transmitter buttons to
operate any other remotely-
controlled devices around your
home (lighting, automatic gate, security system, etc.).
Training With a Rolling Code
System

For security purposes, newer garage
door opening systems use a "rolling"or variable code. Information from
the remote control and the garage door opener are needed before the
HomeLink transmitter can operate
the garage door opener.

The "Training the Transmitter"
procedure trains the HomeLink
transmitter to the proper garagedoor opener code. The following
procedure synchronizes the HomeLink transmitter to the garage
door opener so they send and
receive the correct codes.
CONTINUED
Instruments and Controls

HomeLink Universal Transmitter

It may be helpful to have someone
assist you with this procedure.
1. Make sure you have properly completed the "Training the
Transmitter" procedure.
2. Find the "Training" button on your garage door opener unit. The
location will vary, depending on
the manufacturer. Themanufacturer's documentation
may help.
3. Press the Training button on thegarage door opener unit until the
light next to the button comes on,
then release it. The light may blink, or come on and stay on. You then
have approximately 30 seconds to complete the following steps. 4. Press and release the button on
the HomeLink transmitter. (Thesame button you trained with the

"Training the Transmitter"

procedure.)

5. Press and release the HomeLink transmitter button again. This
should turn off the training light
on the garage door opener unit. (Some systems may require you to
press and release the button up to
three times.)
6. Press the transmitter button again. It should operate the garage door.
Instruments and Controls TRAINING BUTTON

HomeLink Universal Transmitter

Retraining a Button

To train an already programmed
transmitter button to operate a new
device:

1. Select the transmitter button you
want to train.

2. Press and hold the transmitter
button until the red light begins to

flash slowly (approximately 20
seconds).

3. While continuing to hold the
transmitter button, place the

remote control for the device 2 to5 inches from the HomeLink

transmitter.

4. Press and hold the button on the
remote control. Hold both buttons

until the red light begins to flash

rapidly.
5. Release both buttons. The
transmitter should now be trained
to operate the device.
Erasing Codes
To erase the codes stored in all three buttons, press and hold the twooutside buttons until the red light
begins to flash, then release the
buttons.
You should erase all three codes before selling the car. As required by the FCC:
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any
interference received, including
interference that may cause undesired
operation.

Changes or modifications not expressly
approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This device complies with Industry

Canada Standard RSS-210.
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must
accept any interference that may cause undesired operation of the device.
Instruments and Controls

Index

Headlights......................................... 62Aiming......................................... 276
Automatic Lighting Off............... 63Daytime Running Lights............. 63
Lights On Indicator..................... 53
Low Beams, Turning on............. 62
Reminder Chime.......................... 62
Replacing Halogen Bulbs ......... 278

Turning on.................................... 62

Head Restraints............................... 92
Heating and Cooling...................... 110
High Altitude, Starting at.............. 194
HomeLink Universal Transmitter.................................. 83
Hood, Opening the ........................ 180
Hydraulic Clutch............................ 252
Hydroplaning.................................. 210
Identification Number, Vehicle.... 326
Ignition

Keys............................................... 71

Switch............................................ 73

Timing Control System............. 336

Immobilizer System......................... 72
Important Safety Precautions.......... 6
Indicators, Instrument Panel.......... 53
Infant Restraint................................ 28

Infant Seats....................................... 28
Tether Anchorage Points........... 39
Inflation, Proper Tire .................... 268
Inside Mirror.................................... 98

Inspection, Tire.............................. 270

Instrument Panel............................. 53
Instrument Panel Brightness......... 63 Interior Cleaning............................ 290
Interior Lights................................ 106
Introduction......................................... i

Jacking up the Car......................... 209

Jack, Tire........................................ 298

Jump Starting................................. 304
Keys................................................... 71

Gas Mileage, Improving................ 185

Gasohol........................................... 331

Gasoline.......................................... 178

Gauge............................................ 58

Octane Requirement................. 178

Tank, Filling the......................... 178

Gas Station Procedures................. 178

Gauges
Engine Coolant Temperature .... 59
Fuel................................................59

Speedometer................................ 58
Tachometer.................................. 58
Gearshift Lever Positions Automatic Transmission........... 1975-speed Manual Transmission.......................... 195
Glass Cleaning............................... 292
Glove Box......................................... 82

Halogen Headlight Bulbs.............. 278
Hazard Warning Flashers............... 66