width HONDA ACCORD COUPE 2012 8.G Owners Manual

µµÎ
Î
Î
Î
Specif ications(4-cylinder models)
420
Dimensions Seating Capacities
Weights
Air Conditioning
Engine Capacities
107.9 in (2,740 mm)
62.2 in (1,580 mm)
Length
Width
Height
Wheelbase
Track 190.9 in (4,850 mm)
2.1 US qt (2.0
)
2.0 US qt (1.9)
5.4 US qt (5.1)
4.0 US qt (3.8)
4.2 US qt (4.0)
1.96 US gal (7.4
)
1.90 US gal (7.2)
1.64 US gal (6.2
)
1.59 US gal (6.0)
5
2
3
Total
Front
Rear
18.5 US gal (70.0
)
Gross vehicle weight rating See the certification label attached to the driver’s doorjamb.
Refrigerant type
Charge quantity
Lubricant type HFC-134a (R-134a)
14.1 15.9 oz (400 450 g) ND-OIL8
Type
BorexStroke
Displacement
Compression ratio
Spark plugs (U.S.)
Spark plugs (Canada) Water cooled 4-stroke
DOHC i-VTEC 4-cylinder gasoline engine
3.43 x 3.9 in (87.0 x 99.0 mm) 144 cu-in (2,354 cm
)
10.5 : 1
ILZKR7B11S
SXU22HCR11S
DILZKR7B11GS
ILZKR7B11S
SXU22HCR11S
Excluding the oil remaining in the engine Including the coolant in the reserve tank and that remaining in the
engine
Reserve tank capacity: 0.180 US gal (0.68
)
72.7 in (1,848 mm)
56.3 in (1,432 mm)
Fuel tank
Engine
coolant
Engine oil
Manual
transmission
fluid
Automatic
transmission
fluid
Windshield
washer
reservoir4.8 US qt (4.5
)
2.6 US qt (2.5)
6.50 US qt (6.15
)
2.6 US qt (2.5)
Approx.
Change Manual
Automatic
Total Manual
Automatic
1:
2:
NGK:
DENSO:
Front/Rear
ULEV
PZEV
NGK:
NGK:
DENSO: Change
Including filter
Without filter
Total
Change
Total
Change
Total
U.S.
Canada
1
2

Technical Inf ormation
2012 Accord Coupe

ÎÎ
Î
µµ
Î
Î
Î
Specif ications (V6 models)
422
Dimensions Seating Capacities
Weights
Air Conditioning Capacities
Engine Length
Width
Height
Wheelbase
Track 190.9 in (4,850 mm)
62.2 in (1,580 mm)Total
Front
Rear
5
2
3
1.74 US gal (6.6
)
2.27 US gal (8.6)
4.5 US qt (4.3
)
5.3 US qt (5.0
)
Gross vehicle weight rating See the certification label attached
to the driver’s doorjamb.
Refrigerant type
Charge quantity
Lubricant type 18.5 US gal (70.0
)
Fuel tank
Engine
coolant
Engine oil
Manual
transmission
fluid
Automatic
transmission
fluid
Windshield
washer
reservoir 4.8 US qt (4.5
)
7.9 US qt (7.5
)
3.5 US qt (3.3)
2.2 US qt (2.1
)
2.6 US qt (2.5)
Water cooled 4-stroke
SOHC i-VTEC (SOHC VTEC )
6-cylinder (V6) gasoline engine 3.50 x 3.66 in (89.0 x 93.0 mm) 212 cu-in (3,471 cm
)
10.5 : 1
10.0 : 1
ILZKR7B11
SXU22HCR11
Excluding the oil remaining in the engine Including the coolant in the reserve tank and that remaining in the
engine
Reserve tank capacity: 0.180 US gal (0.68
)
ILZKR7B11
SXU22HCR11
Type
BorexStroke
Displacement
Compression
ratio
Spark plugs (U.S.)
Spark plugs (Canada) 4.2 US qt (4.0
)
HFC-134a (R-134a)
ND-OIL8
107.9 in (2,740 mm)
14.1 15.9 oz (400 450 g) 2.6 US qt (2.5
)
72.7 in (1,848 mm)
56.3 in (1,432 mm)
Approx.
1:
2: Change
Total
Front/Rear
ChangeIncluding filter
Without filter
Total
Change
Total
Change
Total
U.S.
Canada
Automatic
Manual
Manual transmission
: NGK:
DENSO:
NGK:
DENSO:
1
2

Technical Inf ormation
2012 Accord Coupe

Quality grades can be f ound where
applicable on the tire sidewall
between tread shoulder and
maximum section width. For
example:
All passenger car tires must conf orm
to Federal Saf ety Requirements in
addition to these grades.The treadwear grade is a compara-
tive rating based on the wear rate of
the tire when tested under controlled
conditions on a specif ied government
test course. For example, a tire
graded 150 would wear one and one-
half (1 1/2) times as well on the
government course as a tire graded
100. The relative perf ormance of
tires depends upon the actual condi-
tions of their use, however, and may
depart signif icantly f rom the norm
due to variations in driving habits,
service practices and dif f erences in
road characteristics and climate.
The traction grades, f rom highest to
lowest, are AA, A, B, and C. Those
grades represent the tire’s ability to
stop on wet pavement as measured
under controlled conditions on
specif ied government test surf aces
of asphalt and concrete. A tire
marked C may have poor traction
perf ormance.
Warning: The traction grade
assignedtothistireisbasedon
straight-ahead braking traction tests,
and does not include acceleration,
cornering, hydroplaning, or peak
traction characteristics.
The tires on your vehicle meet all
U.S. Federal Saf ety Requirements.
All tires are also graded f or
treadwear, traction, and temperature
perf ormance according to
Department of Transportation
(DOT) standards. The f ollowing
explains these gradings.
DOT Tire Quality Grading
(U.S. Vehicles)
Unif orm T ire Quality Grading
T readwear 200
Traction AA
Temperature A T readwear
T raction
424

Technical Inf ormation
2012 Accord Coupe

µ
µ
µ
µ
µµ
µ
The tires that came on your vehicle
have a number of markings. Those
you should be aware of are described
below.
Load index (a numerical code
associated with the maximum
load the tire can carry).
Whenever tires are replaced, they
should be replaced with tires of the
same size. Following is an example
of tire size with an explanation of
what each component means.
Vehicletype(Pindicates
passenger vehicle).
Tire width in millimeters.
Aspect ratio (the tire’s section
height as a percentage of its
width).
Tire construction code (R
indicates radial).
Rim diameter in inches. Speed symbol (an
alphabetical code indicating
the maximum speed rating).
P
R V
235
45
18 94
Tire Labeling
Tire Size
426
(3)
(4)
Tire Labeling Example
(1)
(2) (1)
(2)
(3)
(4) (1) Tire Size Tire Identification Number (TIN)
Maximum Tire Pressure
Maximum Tire Load
P235/45R18 94V

Technical Inf ormation
2012 Accord Coupe