check engine HONDA ACCORD SEDAN 2014 9.G Technology Reference Guide

45
INSTRUMENT PANEL INDICATORS
Malfunction IndicatorsIf an indicator remains on, there may be a problem; see your dealer
On/Off Indicators
Condition IndicatorsAction is needed by driver
PASSENGER AIRBAG OFF(next to display screen)
VSA OFF
CRUISE CONTROL on
ECON Mode on Fog lights on
Headlights on
Turn signals/hazards on
High beams on
Charging system
Low brake fluid Anti\bLock Brake System (ABS)
Malfunction lamp
(check engine light)
Tire Pressure Monitoring System
(TPMS) (blinks and stays on )
Vehicle Stability Assist
®(VSA)
Parking brake on:
Release Seat belt reminder:
Fasten seat belt(s)
Starter system
Brake system
Smart Entry System
Automatic light control
Low oil pressure
Supplemental Restraint System
(SRS)
Electric Power System (EPS)
Forward Collision Warning
(FCW)
Lane Departure Warning
(LDW)
Door/Trunk open:
Close door(s) / trunk Low tire pressure:
\bdd air
Maintenance Minder
TM:
Make dealer appointmentLow fuel:
Refill
LDW (blinks):
Stay in your laneFCW (blinks):
Brake
CRUISE MAIN on
Immobilizer (blinks):
Use other vehicle key
and see dealer
Briefly appear with each engine start. Red and orange indicators are most critical. Blue
and green indicators are used for general information. See your Owner’s Manual for
more information.
14 Accord 2D TRG_EXL \ANAVI_ATG_NEW STYLE \A 7/18/2013 9\f0\b AM \APage 4

\b9
3. Press ECON again to turnthe system off.
2. The ECON mode indicatorcomes on.\f. Press ECON to turn thesystem on.
ECON Button
E C O A S S I S TT M
When turned on, performance of the vehicle’s engine, transmission, cruise control, and
air conditioning system are adjusted to maximize fuel efficiency.
Ambient Meter
High fuel efficiency Moderate fuel efficiency Low fuel efficiency
Indicates real\btime fuel efficiency using color\bcoded bars.
T I R E P R E S S U R E M O N I T O R I N G S Y S T E M ( T P M S )
Monitors the vehicle’s tire pressures.
How It Works
When the tire pressure drops
significantly below recommended
levels, the low tire pressure
indicator comes on.
What to Do
\f. Visually inspect the tires for damage.
2. Use a tire air pressure gauge to check which tire(s) have low pressure.
3. Inflate the tire(s), if necessary, to the recommended pressures listed on the
label on the driver’s doorjamb.
4. Start TPMS calibration.
Any time you inflate, change, or rotate one or more of your tires, you need to
recalibrate the system.
TPMS Calibration
\f. Press SETTINGS. Use the interface dial to make and
enter selections.
2. Select Vehicle Settings.
3. Select TPMS Calibration.
4. Select Calibrate. The low tire pressure indicator blinks, and
calibration begins.
5. Press BACK to exit the menu.
14 Accord 2D TRG_EXL \ANAVI_ATG_NEW STYLE \A 7/18/2013 9\f07 AM \APage \b