cvt HONDA CIVIC 1996 6.G Workshop Manual

Chassis and Paint Codes
U.S. 1996 Model (2-door Coupe)
Vehicle ldentif ication Number
and Federal Motor Vehicle
Safety Standard Certification
IHG EJ6 12*T L 000001
Line. Body and Engine Type
EJ6: CIVIC 2-doorD16Y7
EJ7: ClVlC 2-doorD l6Y5
EJ8: ClVlC2-door/D16Y8
Body Type and Transmission Type
Check Digit
Model Year
T: 1996
L: East Liberty, Ohio Ptant, U.S.A.
1:Coupe/s-speed
Ma nua I
2: Coupe/4-speed Automatic, CVT
4: DX with A'lC, HX with A,,/C, EX
5: DX with ABS and A,/C, EX with ABS
ofEngine Number
Engine Type
D16Y5: 1600 SOHC WEC E 16-vatves
Sequential Multiport
Fuel-injected Engine
D 16Y7: 1600 SOHC 16-vatves
Sequential Multiport
Fuel-injected Engine
D16Y8: 1600 SOHC WEC 16-vatves
Sequential Multiport
Fuel-injected Engine
Serial Number
JAPAN: Dl6Y5 - 130000'1-
U.S.A. : D16Y7, D16YB - 150000'1-
Paint Code
oa
COLOR
G.82P
1300001
A4RA | 4-speed Automatic TransmissionS40 :s-speed Manual TransmissionM4VA I Continuously Variabte
Transmission (CVT)
A4RA : 5000001-
S40 : 1000001-
M4VA: 1000001-
NH-503P
NH-538
NH 583M
R-81
R-95P
Cypress Green Pearl
Granada Black Pearl
Frost White
New Vogue Silver MetallicMilano Red
lsland Coral Pearl
1-4
OO

Chassis and Paint Codes
U.S. 1997 Model (2-door Coupe)
Vehicle ldentification Number
and Federal Motor Vehicle
Safety Standard Certification
OOEngine Number
Engine Typ6
D16Y5: 1600 SOHC VTEC-E 16 vatves
Sequential Multiport
Fuel-injected Engine
D16Y7: 1600 SOHC 16-valves
Sequential Multiport
Fuel-injected EngineDl6Y8r 1600 SOHC VTEC 16 vatves
Sequential Multiport
Fuel-injected Engine
Serial Number
JAPAN: D16Y5 2300001-
U.S.A. : Dl6Y7, Dl6Y8 - 2500001-
Paint Code
D16Y5 - 2300001
eo
COLOR
Lino. Eody and Engine Typ6
EJ6: ClVlC2-door/D16y7
EJ7: ClVlC2-door/Dl6Yb
EJ8: ClVlC2-door/D16y8
Body Type and Transmission Type
Check Digit
Model Yeal
V: 1997
L: East Liberty, Ohio Plant, U.S.A.
A4RA: 4 speed Automatic Transmission84RA : 4-speed Automatic TransmissronS40 :s-speed Manual TransmissionM4VA: Continuously Variable
Transmission (CVT)
A4RA : 6000001-
B4RA: 6000001-
S40 : 1000001-
M4VA: 2000001-
G.82P
NH-503P
NH,538
NH-583M
R-8r
Cypress Green Pearl
Granada Black Pearl
Frost White
New Vogue Silver Metallic
Milano Red
1-1 0
G.82P
lo

Ghassis and Paint Codes
U.S. 1998 Model (2,door Coupel
Vehicle ldentif ication Number
and Federal Motor Vehicle
Safety Standard Certification
lHG EJ6 12*WL 000001
Line, Body and Enginc TypeEJ6: ClVlC2-door/D16y7
EJ7: ClVtC2-door/D16ys
EJ8: ClvlC2-door/D16y8
Body Type and Transmission Type
5: EX with ABS and IVCChock Digir
Model Year
W: 1998
L: East Liberty, Ohio ptant. U.S.A.
eaEngine Number
Engine Type
D16Y5: 1600 SOHC WEC-E l6,vatvesSequential Multiport
Fuel-injected EngineD16Y7: 1600 SOHC 16-valves
Sequential Multiport
Fuel-in.iected EngineDl6Y8: 1600 SOHC WEC 16-vatves
Sequential Multiport
Fuel-injected EngineSerial Number
JAPAN: D16Y5 - 3300OOt-U.S.A. : D16Y7, D'16y8 - 3500001-
Paint Code
D16Y5 3300001
0a
COLOR
G.82P
84RA : 4-speed Automatic TransmissronS40 :s-speedManualTransmission
M4VA: Continuously Variable
Transmission (CVT)
B4RA:7000001-
S40 :1000001-
M4VA: 4000001-
NH-592P
NH-578
NH-583M
R-81
Cypress Green Pearl
Flamenco Black PearlTaffeta White
New Vogue Silver MetalticMilano Red
1-16
aa

Chassis and Paint Codes
Vehicle Grade
2: DX, HX
4: EX
5: EX With ABS, Si
Check Digit
Model Year
X:1999
Factory Code
L: East Liberty, Ohio Plant, U.S.A.Serial Number
Vehicle ldentification Number
and Federal Motor Vehicle
Safety Standard Certification
U.S. 1999 Model (2-door Coupe)
Vehicle ldentification Number
1HG EJ6 12*XL 000001
Manutacturer, Make andType of Vehicle'1HG: HONDA OF AMERTCA
MFG., INC.
HONDA Passenger
vehicle
Line, Body and Engine TypeEJ6: ClVlC2-door/D16y7
EJ7: ClVlC2-door/D16y5
EJ8: ClvlC2-door/D16y8
EM1: CIVIC 2-doorlB'1642
Body Type and Transmission Type1: Coupe/s-speed
Manual
2: Coupe/4-speed Automatic, CVT
Engine Number
Engine Type
81642:'1600 DOHC VTEC 16 vatves
Sequential Multiport
Fuel-injected EngineDl6Y5: 1600 SOHC WEC-E 16 vatves
Sequential Multipon
Fuel injected EngineD16Y7: 1600 SOHC t6-vatves
Sequential Multiport
Fuel,injected EngineD16Y8: 1600 SOHC VTEC 16-vatves
Sequential Multipon
Fuel-injected EngineSerial Numbel
JAPAN: 816A2, Dl6Y5 - 4300001-U.S.A. : D16Y7, D16Y8 - 4SO000t -
Paint Code
aa
ta
COLOR
B4RA : 4-speed Automatic TransmissionS40, S4C: 5-speed Manuat TransmissionM4VA : Continuously Variable
Transmission (CVT)
B4RA : 8000001-
S40, S4C:1000001-
M4VA : 5000001-
B-95P
G-95P
NH-592P
NH-578
NH-583M
R-97
Electron Blue Pearl
Clover Green PearlFlamenco Black Pearl
Taffeta White
New Vogue Silver Metallic
Roma Red
1-22
I
NH.592P
ea

Chassis and Paint Codes
U.S.2000 Model (2-door Coupe)
Vehicle ldentification Number
l HG EJ6 12 *Y1000001
Manufacturer. Make and
Type ol Vehicle'1HG: HONDA OF AMERICA
t\4FG., tNC.
HONDA Passenger
Vehicle
Line, Body and Engine Type
EJ6: ClvlC2-door/Dt6Y7
EJ7: ClVlC2,door/D16y5
EJ8: ClVlC2-door/D16Y8
EM1: CIVIC 2-doorlB1642
Body Type and Transmission Type1 : Coupe/s-speed Manual
2: Coupe/4-speed Automatic, CVTVehicle Grade
2: DX, HX
4: EX
5: EX with ABS, Si
Check Digit
Model Year
Y: 2000
Factory Code
L: East Liberty, Ohio Plant, U.S.A.Serial Number
Vehicle ldentification Number
and Federal Motor Vehicle
Safety Standard Certification
Engine Number
81642, D16Y5: 5300001-
Dl6Y7, Dl6Y8: 5500001-
Engino Type
Bl642; 1600 DOHC WEC '16-vatves
Sequential Multiport Fuel-injected
Engine
D'I6Y5: 1600 SOHC WEC-E 16.vatves
Sequential Multiport Fuel-injectedEngine
D16Y7: 1600 SOHC 16-valves Sequenlal
Multiport Fuel-injected Engine
D16Y8: 1600 SOHC WEC 16-vatves
Sequential Multipon Fuel-injected
Engine
Serial Number
COLOR
D16Y5 - 5300001
ta
to
Paint Code
B4RA : 4-speed Automatic Transmission
S40, S4C: 5-speed Manual Transmissron
M4VA :ContinuouslyVariable
Transmission (CVT)
B4RA : 9000001*
S40. S4C: 1000001-
M4VA :6000001-
B-95P
NH-578
NH.583M
NH-592P
R-81
Electron Blue Pearl
Clover Green Pearl
Taffeta White
New Vogue Silver Metallic
Flamenco Black Pearl
Milano Red
1-28
NH.592P
to

Standards and ServiceLimits
Section '14Automatic Transmission (cont'd)
UO
MEASUREMENTSTANDARD {NEW}
Wire Dia.o.D.Free LongthNo. ol CoilsHegulator valve spring ARegulato. valve spring BStator reaction springModulator valve springTorque convener check valve springCooler relief valve springRelief valve spring2nd oritice control valve spring1-2 shift valve spring2-3 sh ift valve spring3 4 shift valve spring'l st accumulator spring4th accumulator spring B4th accumulator spring A2nd accumulator spring A3rd accumulator spring A2nd accumulator spring B3rd acc!mulator spring B2nd accumulator spring CLock up shift valve springLock up timing valve springLock-up control valve spring3 4 ofifice control valve springServo control valve springCPC valve springCPB valve spring4th exhaust valve spring
Springs1.8 {0.071)1.8 {0.071)4.5 \O.117)1.4 (0.055)
1.0 10.039)1.0 (0.039)
1.1 (0.043)
0.7 (0.028)
0.9 (0.035)
0.9 (0.035)
0.9 (0.035)
2.1 (0.083)
2.3 (0.091)
2.610.102)2.4 (0.094)
2.8 (0.'110)
1.6 (0.063)
2.2 (0.087)
2.2 t0.041)0.9 (0.035)
0.9 (0.035)
0.7 (0.028)
0.7 (0.028)
1.0 (0.039)
0.6 (0.024)
0.9 {0.035)0.9 (0.035)
14.7 (0.584)
9.6 (0.381)
3s.4 (1.407)
9.4 (0.374)8.4 (0.334)
8.4 (0.334)
8.6 {0.342)6.6 (0.262)
7.6 (0.302)
7.6 (0.302)
7.6 (0.302)16.0 (0.636)10.2lo.402l17.0 {0.676)29.0 (1.152)
17.5 (0.6951
9.0 (0.358)
31.0 (1.220)
14.5 {0.576)7.6 (0.302)
8.1 (0.319)
6.610.262)6.6 (0.262)
8.1 (0.322)
5.6 (0.2231
8.1 10.322)6.1 10.242)
87.8 (3.457)
44.0 i.732l'30.3 (1.193)
35.0 {1.378)33.8 (1.331)
33.8 (1.331)
37.1 (1.461)
34.8 (1.370)
41.3 (1.626)
57.0 (2.2441
51 .0 \2.244189.1 {3.508)51.6 (2.031)
87.0 (3.425)
39.011.535)89.3 (3.516)
20.7 (0.815)
35.1 11.382)68.012.671173.7 12.902)80.7 (3.177)38.0 {1.496)37.5 fi.476)52.1 (2.051)
12.2 (0.480)
47.2 {1.858}36.4 {1.433)
16.511.01.910.94.24.213.422.016.326.826.a16.213.814.22.915.66.12.413.932.045.814.124.620.4
18.319.5
CVTSection 14
3-14
MEASUREMENTSTANDARD INEWISERVICE LIMITTransmissionfluidCapacity f {US qt, lmp. qt)6.4 {6.8, 5.6) for overhaul3.9 (4.1, 3.4) for fluid change
Hydraulicpressure
1kgflcm,, psi)
Forward clutch pressure at 1,500 rpm in E position1.4 - 1.15 114.3 - 11.A,203 - 2531Reverse brake pressure at 1,500 rpm in E position1.4 - 1.75 (14.3 11.8,203 2531Dr;ve pulley pressure at 1,500 rpm in E posrtrono.2 -0.7 12.0 -7.1,28- 1011Driven pulley pressure at 1,500 rpm in N positionr.5 - 2.3 115.3 - 23.5, 218 - 334)Lubrication pressure at 3,000 rpm in E posrtronAbove 0.212,30)Stall speed fpm (Check with vehicle on level ground)
E position
E, E, El positions2,5003,0002,350 - 2,6502,800 - 3, r00ClutchClutch initial clearance Forward clutchStart clutchReverse brakeClutch return spring free length Forward clutchStart clutchReverse brakeClutch disc thickness Forward clutchStart clutchReverse brakeClutch plate thickness Forward clutchSta rt clutchReverse brake
0.6 - 0.8 (0.024 - 0.031)0.5 - 0.7 (0.020 0.028)0.45 - 0.75 (0.018 - 0.030)30.5 {1.201)40.9 (1.610)
29.4 (1.157)
1.88 - 2.00 (0.074- 0.079)1.88 2.00 (0.074 - 0.079)1.94 - 2.06 (0.076 - 0.081)1.95 - 2.05 (0.077 -0.081)
2.25 2.35 (0.089 - 0.093)1.90 - 2.00 (0.075 0.079)
,*x.ar}38.9 (1.531)
27.411.019l'Until grooves worn out
Until grooves worn outDiscolorationDiscolorationDiscoloration
L.

MEASUREMENTSTANOARO INEW}SERVICE LIMIT
algnmenlCamber FrontRearCaster FrontTotaltoe FrontBearFront wheel turning angle Inward wheelOutward wheel
0"00'1 1"-1.1 1'1'40' I 1"In'1.01 2.0 {1/16 t 1/'16)In 2.0 ljB (1/161 1/16)39.50'33'10'(Reference)
Bim runout Aluminum wheel AxialBadialSteelwheel AxialRadla I
0 0.7 (0 - 0.03)0- 0.7 (0 - 0.03)0 - 1.0 (0 0.04)0 - 1.0 (0 0.04)
2.0 (0.08)
1.5 10.06)2.0 {0.0B)1.5 (0.06)Wheel bearingEnd play FrontRear0 0.0s (0 - 0.002)0 0.05 (0 0.002)
Standards and Service Limits
Suspension - Section 18
Brakes - Section 19
*1. 5410 Stamped on the caliper body.*2. 2056 Stamped on the caliper body.
Air Conditioning - Section 22
*: When using a new belt, adjust deflection or tension to new values. Run the engine for 5 minutes then turn it of{.Readjust deflection or tension to used belt values.
3-18
MEASUREMENTSTANDARO INEWISERVICE LIMIT
Parklng brakePlay in stroke at 196 N (20 kgf, 44 lbfi lever forceTo be locked when pulled6 - I notchesFoot brakepeoalPedal height (with floor mat removed) M/TA/'T, CVTFree play
156.5 {6.16)161 (6 5/16)1 5(1/16-3/16)
Master cvlinderPiston to pushrod clearance0 - 0.4 (0 0.02)
Disc brakeDisc thickness FrontRearDisc runout FrontRearDisc parallelism Front and rearPad thackness Front
Rear
20.9 - 21.8 (0.82 - 0.86)8.9 - 9.1 (0.350 - 0.358)
9.5 10.5*'8.5 - 9.5*'7.0 8.0 (0.28-0.3r)
19.0 (0.75)
8.0 (0.31)
0.10 (0.004)
0.10 (0.004)
0.015 (0.0006)
1.6 (0.06)1.6 (0.06)'r.6 (0.06)
Rear brakedrumLD.Lining thickness200 17.a7l4.0 (0.16)201 \7 .9112.0 {0.08}
MEASUREMENTSTANDARD INEWI
Conditioning
SANDEN
Lubricant type: SP 10 (P/N 38897 - Pl3 - A01AH or 3889Lubricant capacity Condensermf (floz, lmp oz) EvaporatorLine or hoseReceiver
I - P13 A0li lFor refrigerant: HFC-134a (R,134a))
| 20 \2t3 0.11
I 45 (1 2/3, 1.6)10 (1/3,0.4)
10 t1/3,0.4)NIPPONDENSOLubricant type: ND'O|L8 (P/N 38899 - PR7 - 003) (For ReLubricant capacity Condensermf (floz, lmp oz) EvaporatorLine or hoseReceiver
f.igerant: HFC,134a (R-134a))25 (s/6 0.9)60 (2,2.11
10 (1/3,0.4)
10 (1/3.0.4)
CompressorSANDENLubricant type: SP-10Lubricant capacity ml lfl oz, lmp oz)Field coil resistance at 68'F (20"C) OPulley-to-pressure plate clearance
130 150 (4 1/3 4.6, 5.0 - 5.3)
0.5 r 0.15 10.020 t 0.006)
NIPPONDENSOLubricant type: ND-OlL8 {P/N 38899 - PR7 ,003 or P/N 38899 pR7 - AO1) (For Refrigerant: HFC 134a {R,134a))Lubricant capacity m{(fl oz, lrnpoz) | 14O(4.7,4.9J -15S{5.2.5.4)Stator coil resistance at 20'C (68.F) 0Pulley-to-pressure plate clearance3.4 - 3.80.510.15 (0.0210.006)
Compressorbelt*Deffection with 98 N (1Okgl.22lbllbetween pulleys7.5 - 9.5 (0.30 0.37) with used belt5.0 - 6.5 (0.20 - 0.26)with new belt
Belt tension N (kgf, lbf)Measured with belt tension gauge340 490 i35 50, 77 - 110) with used bell690 - 830 (70 - 85, 150 190) with new belt

Design Specifications
ITEMMETRICENGLISHNOTEDII/IENSIONS Overall Length2 door Coupe/4 door Sedan (,96 98)('99,'00)2 door Hatchback (,96, ,97)
('98 - 00)OverallwidthOverall height 2 door Coupe/2 door Hatchback4-door SedanWheelbase
I Track FronvRearGround ClearanceSeatiog Capacity
4,445 mm4,450 mm4,170 mm4,180 mm1,705 mm1,375 mm1,390 mm2,620 mm1,475/1,415 mm150 mm
175.0 in115.2 in164.2 in164.6 in67.1 in54.1 in54.7 in103.1 in58.1/58.15.9 in
WEIGHT (USA)Gross Vehicle Weight Raring (GVWR)2 door Coupe HX M/T, DX M/THX CVI ('96)HX CVT ('97,'98)HX CVT ('99}DX A,/T (96 98,DX A"/T ('99, '00)
EXSi2 door Hatchbacl CX. DX r'96, 97,cx, DX ('98)cx (,99, ,00)
DXM/Ti'99,00iDX A/T ( 99, 00,4 door Sedan DX, LX, DX-VEX
3,290 tbs3,320 tbs3,330 tbs3,360 rbs3,290 rbs3,310 tbs3,440 tbs3,480 tbs3,285 tbs3,290 tbs3,290 tbs3,290 tbs3,330lbs3,330 tbs3,460 tbsWEIGHT (CANADA)Gross Vehicle Weight Bating (GVWR)2-door Coupe DX ('96)DX ('97 00)DX-Gsi 1,96)si ('97 - 00)siR2 door Hatchback CX, CX,G ('96)cx, cx,G 1,97)cx-G (,98)
cx ('98 00)DX M/T, SE M/IDX A,/T, SE A,/T4 door Sedan LX, LX VEX M/IEX A/T
1,500 ks1,510 kg1,510 kg1,560 kg1,570 kg1,590 ks1,495 kg1,505 kg1,510 ks1,510 ks1,510 kg1,530 kg1,510 kg1,510 ks1,540 ksENGINEType
Cylinder ArrangementBore and Stroke D16Y5, D16Y7, Dt6y8B 1642DisplacementD16Y5, D16Y7, Dl6Y881642Compression Ratio D16Y5, D16y7D16Y8816A2Valve TrainLubrication SystemOil Pump Displacement at 6,800 engine rprnD16Y5, D,l6Y7, D16Y881642Water Pump Displacementat 6,000 engine rpm 016Y5, D16Y7, D16y8816A2Fuel Required D16Y5, D16Y7, D16y8
816A2
Water-cooled, 4-stroke SOHC*1, SOHCVTEC"', SOHC WEC.E'3, DOHC VTEC{gasoline engineInline 4 cylinder, transverse2.95 x 3.54 in3.19 x 3.05 in97.0 cu-in97.3 cu in9.49.610.2Belt driven, 4 valve per cylinderForced and wet sump, trochoid pump
33.4 f (35.3 US qt, 29.4 lmp qt)/minute43.8 | (46.3 US qt, 38.6 lmp qt)/minute
125 { {132 US qt, 110 lmp qt}/minute140 f {148 US qt, 123 lmp qt}/minuteUNLEADED gasoline with 86 PumpOctane Number or higherPremium UNLEADED gasoline 91 PumpOctane Number or higher
75.0 x 90.0 mm81.0 x 77.4 mm1,590 cm31,595 cm3
*1: D16Y7*': D16Y8*3: D16Y5*': 816A2
STARTEBType/MakeNormal OutputNominalVohageHour RatingDirection of Rotation
Gear reduction/MITSUBA1.0 kw, 1.2 kw12V30 secondsClockwise as viewed from gear end
5-Z.V
-

trEM I merntc ENGLISH NorEs
SfAnff n i*nt-i- W"'gf,t MllSUBA r.u, l.z kw r'4 rg
CLUTCHClutch Type
Clutch Facing Area
M/T
CVTM/T
Single plate dry, diaphragm springTorque converterMulti plates wet sanP, hYdraulic160 cm,25 sq in
Synchronized 5-speed forward, 1 reverse
4 speed automatic, 1 reverse
Non stage speed forward, 1 reverse
Direct 1 : 1
TRANSMISSIONTransmission Type
Primary Reduction
M/TArrCW
Manualtransmission
Gear Ratio 1st2nd3rd4th5thReverse
Final Reduction Gear ratio
Gear tYPe
Engine type
D16Y5 | D16Y7 D16Y8 I 81642
3.2501.1821.1120.9090.7023.153
3.2501.1821.1120.9090.7023.153
3.2501.9091.2500.9090.1023.153
3.2302.1051.4581.1070.8753.000
*1:2 doorHatch back+2r 2-door Coupe,and 4 doorSedan
3.122 13.122"11.053" 1 4.250 | 4.266
Single helicalgear
Engine type
D16Y7 | D16Y8Automatic transmission
Gear Ratio 'lst
2nd3rd4thReverse
Final Reduction Gear ratio
Gear tYPe
2.6001.4680.9260.6381.954
2.122
0.9750.6381.954
1.3514.357
cwGear Ratio Low - O.D.Reverse
Secondary Reduction Gear Ratio
Final Reduction Gear Ratio
2.466 0.4492.4661.3334.357
AIRCONDITIONING
Cooling Capacity3,530 Kcal/h14,000 BTU/h
Compressor Type/MakeNo. of CYlindersCaPacitYMax. SpeedLubricant CaPacitY
Scroll/SANDEN
85.7 m//rev 5.22 cu inkev10,000 rpm130 mf 41l3tl oz.
| 4.6 imp ozsP,10
Compressor Type/ManufacturerNo. of CylinderCapacityMax. SpeedLubricant CaPacitY
Lubricant TYPe
Swash-plate/DENso10155.3 mf /rev 9.4 cu_in/rev76,000 rpm140 mf | 4 2l3fl oz,I 4 9lmp ozND'OIL8
Condenser TypeCorrugated fin
Evaporator TyPeCorrugated fin
Elower TyPeMotor InputSPeed ControlMax. CaPacity
Sirocco fan200w112v4 speed variable460 m3/h 16,200 cu ft/h
Temperature Control
Compressor Clutch TyPePower ConsumPtionDry, single plate, PolY-V'belt drive40 W max./12 V at 68'F (20'C)
Refrigerant TyPeouantity
HFC 134a (R'134a)
650 gos | 22.9 isoz
(cont'd )
4 . J-Z I

ILubrication Points
For the details of lubrication points and types of lubricants to be applied, refer to the lllustrated Index and various workprocedures (such as Assembly/Reassembly, Replacement, Overhaul. Installation, etc.) contained in each section.
No.LUBRICATION POINTS
Engine
LUBRICANT
"Energy Conserving" grade oil,The oil container may also display the Apl Certification markshown below. Make sure it says ,,For Gasoline Engines.,,SAE Viscosity: See chart below,
I
TransmissionManualGenuine Honda MTF*1
Genuine Honda Premium FormulaAutomatic Transmission Fluid (ATF)*,
Genuine Honda CVT Fluid*3
Genuine Honda DOT3 Brake Fluid*a
Automatic
CVT
3Brake Line
ClL,tci t""e4
I
Genuine Honda DOT3 Brake Fluid*aPower steering gearboxSteering grease P/N 08733 - BO70EShift lever pivots (manual transmission)Grease with molybdenum disulfide7-:ti
9
10'l'l
l3
14
't7
18
19
20
2122
Release fork (manual trancmi Steering bootsTailgate hinges and latches (2-door HatchbacklSteering ball joints
Shift lever (automatic transmission)Pedal linkageBrake master cylinder pushrod
Super High Temp Urea crease (p/N 08798 - 9OO2)
i Multi-purpose grease
I
I
Honda White Lithium Grease
Multi-purpose grease
Silicone grease
@
Trunk hinges and latch (4-door Sedan and 2-doorCoupe)Door hinges upper and lowerDoor opening detentsHood hinge and hood latch-FUet T ter ttd
Clutch master cylinder pushrodThrottle cable end and throttle linkageRear brake shoe linkagesSteering wheel (back side)
23
E-
Caliper piston seal, dust seal,caliper pin. pistonThrottle cable end (dashboard lower panel)
Power steering system (for cars with p/S)
Air conditioning compressorComDressor oil:SANDEN: SPlo P/N 38897 - p13 -A01AH or 38899 - p13_ A01{For Refrigerant: HFC-134a (R-134a))
CERTIFICATION SEAL
ffi
NorE: The items m arked * 1, *2, +3, *4 and +5 on above chan are described as folows:*1: Always use Genuine Honda Manual Transmission Fluid (MTF). Using motor oil can cause stiffer shifting because itdoes not contain the proper additives.*2: Always use Genuine Honda premium Formula Automatic Transmission Fluid (ATF). Using a non-Honda ATF can affectshift quality.+3: Use Genuine Honda cVTfluid only usingotherfluid can affect tra nsmission operation and may reduce transmission life.*4: Always use Genuine Honda DoT3 Brake Fluid. Using a non-Honda brake fluid can cause corrosion and dec.ease the lifeof the svstem.*5: Always use Genuine Honda Power steering Fluid. using any other type of power steering fluid or automatrc transmissionfluid can cause increased wear and poor steering in cold weather.
4-2
Recommended Engine Oil
Engine oil viscosity forambrent temperature ranges
API SERVICE LABEL