Front Suspension
Damper/Spring Replacement
Exploded View
DAMPER MOUNTINGBEARING
UPPER SPRING MOUNTINGCUSHIONCheck for deteriorationano oamage,
DAMPER SPRINGCheck for lree length.
./ SELF-LOCK|NG NUT/.' 12 x 1.25inm
,,/ 44 N.m {4.5 kgt.m, 33lbf.ftl,/ neDtace.^atae9
-€.- - DAMPER MOUNTING BASE
1, @-:'\--""' check for delormation
lF \-:-./ - ,
E9-
DAMPER UNITCheck for oil leaks,gas leaks, and smoothoperatron.
\
18-20
5. With a feeler gauge (A), measure the clearance
between the gauge body and the adjusting nut (B)
as snown,
lf the clearance between the gauge body and the
adjusting nut is 0.4 mm (0.02 in.), the pushrod-to-
piston clearance is 0 mm. However. if the clearance
between the gauge body and the adjusting nut is
0 mm, the pushrod-to-piston clearance is 0 4 mm
{0.02 in.) or more. Therefore it must be adjusted
and rechecked.
Clearance: 0-0./t mm (0-0.02 in.)
lf the clearance is incorrect, loosen the star locknut
(A). and turn the adjuster (B) in or out to adjust.
. Adjust the clearance while the specified vacuum
is appiied to the booster.. Hold the clevis (C) while adjusting.
A0 0.4 mm l0 -0.02 in.) 22N.n
07JAG-SO40100
7. Tighten the star locknut securely.
8. Remove the special tool (D).
9. Check the pushrod length (A) asshownifthe
booster is removed, lf the length is incorrect,
loosen the pushrod locknut (B), and turn the clevis
(C) in or out to adjust.
A116 mm {4.6 in.)
10. Installthe master cylinder (see page l9-15)
10 x 1.0 mm1.5 N'm11.5 kgf.m,11 lbf.ftl
19-17
