fuel HONDA CIVIC 2012 9.G Owner's Manual
[x] Cancel search | Manufacturer: HONDA, Model Year: 2012, Model line: CIVIC, Model: HONDA CIVIC 2012 9.GPages: 345, PDF Size: 9.02 MB
Page 217 of 345

uuWhen DrivinguShifting
216
Driving
■Shift Lever Operation1Shift Lever Operation
NOTICE
When you change the shift lever from (D  to (R and 
vice versa, come to a complete stop and keep the  
brake pedal depressed. 
Operating the shift lever before the vehicle has come  
to a complete standstill can damage the transmission. 
Use the shift lever position indicator to check the  
lever position before pulling away. 
Whichever position the shift lever is in when driving,  
a blinking 
(D  indicator indicates a transmission 
problem. 
Avoid sudden acceleration and have the transmission  
checked by a dealer as soon as possible. 
The fuel supply may be cut off if you drive at engine  
speeds in or over the tachometer red zone (engine  
speed limit). If this happens, you may experience a  
slight jolt. 
It may not be possible to operate the shift lever if the  
brake pedal is applied while the shift lever release  
button is held down. 
Depress the brake pedal first.Tachometer's red zone
Shift Lever Position Indicator
Depress the brake pedal and  
press the shift lever release button to 
shift. 
Shift without pressing the shift lever  
release button. 
Press the shift lever release button  
and shift. 
Page 219 of 345

uuWhen DrivinguShifting
218
Driving
When you are not shifting, do not rest your  
foot on the clutch pedal. This can cause your  clutch to wear out faster. 5-speed manual  
transmission1Shifting 
Recommended Shift Points 
Driving in the highest gear that allows the engine to  
run and accelerate smoothly helps to optimize fuel 
economy and effective emissions control. The 
following shift points are recommended: 
If you exceed the maximum speed for the gear you  
are in, the engine speed will enter into the  
tachometer's red zone. When this happens, you may  
experience a slight jolt. Shift Up Normal Acceleration
1st to 2nd15 mph (24 km/h)
2nd to 3rd 27 mph (43 km/h)
3rd to 4th39 mph (63 km/h)
4th to 5th 53 mph (85 km/h)
Shift Up Normal Acceleration
1st to 2nd17 mph (27 km/h)
2nd to 3rd 29 mph (46 km/h)
3rd to 4th37 mph (59 km/h)
4th to 5th 43 mph (69 km/h)
5th to 6th49 mph (79 km/h)
5-speed manual transmission models
6-speed manual transmission models
6-speed manual  
transmission   
Page 227 of 345

226
uuWhen DrivinguTire Pressure Monitoring System (TPMS) - Required Federal Explanation
Driving
Tire Pressure Monitoring System (TPMS) - Required 
Federal Explanation Each tire, including the spare (if provided), should be checked 
monthly when cold and inflated to the inflation pressure  
recommended by the vehicle manufactu rer on the vehicle placard 
or tire inflation pressure label. 
(If your vehicle has tires of a different size than the size indicated  
on the vehicle placard or tire  inflation pressure label, you should 
determine the proper tire inflation pressure for those tires.) 
As an added safety feature, your vehicle has been equipped with  
a tire pressure monitoring system (TPMS) that illuminates a low 
tire pressure telltale  
when one or more of your tires is  significantly under-inflated.
Accordingly, when the low tire pressure telltale illuminates, you  
should stop and check yo ur tires as soon as possible, and inflate 
them to the proper pressure. Driving on a significantly  under-inflated tire causes the tire to 
overheat and can lead to tire failure. Under-inflation also reduces  
fuel efficiency and tire tread life, and may affect the vehicle's  
handling and stopping ability.
U.S. models 
Page 235 of 345

234
Driving
Refueling
Fuel Information ■Fuel recommendation
Use of a lower octane gasoline can cause a persistent, heavy metallic knocking noise  
that can lead to engine damage. 
Use of a lower octane gasoline can cause occasional metallic knocking noise in the  
engine and will result in decreased engine performance.
Use of a gasoline with a pump octane less than 87 can lead to engine damage. ■ Top tier detergent gasoline
Because the level of detergency and additives in gasoline vary in the market, Honda  
endorses the use of “TOP TIER Detergent Gasoline” where available to help  
maintain the performance and reliability of your vehicle. TOP TIER Detergent 
Gasoline meets a new gasoline standard jointly established by leading automotive  
manufacturers to meet the needs of today’s advanced engines.
Unleaded gasoline, pump octane number 87 or higher
Unleaded premium gasoline, pump octane number 91 or higher
1Fuel Information
NOTICE
We recommend quality gasoline containing  
detergent additives that help prevent fuel system and  
engine deposits. In addition, in order to maintain  
good performance, fuel economy, and emissions  
control, we strongly recommend the use of gasoline  
that does NOT contain harmful manganese-based 
fuel additives such as MMT, if such gasoline is  available. 
Use of gasoline with these additives may adversely  
affect performance, and cause the malfunction  
indicator lamp on your instrument panel to come on. 
If this happens, contact a dealer for service.
Some gasoline today is blended with oxygenates such  
as ethanol. Your vehicle is designed to operate on  
oxygenated gasoline containing up to 10% ethanol 
by volume. Do not use gasoline containing methanol.  
If you notice any undesirable operating symptoms, try  
another service station or switch to another brand of 
gasoline.1.8  engine models
2.4  engine models 
Page 236 of 345

Continued235
uuRefuelinguHow to Refuel
Driving
Qualifying gasoline retailers will, in most cases, identify their gasoline as having met  
"TOP TIER Detergent Gasoline" standards at the retail location. This fuel is  
guaranteed to contain the proper level of detergent additives and be free of metallic  
additives. The proper level of detergent additives, and absence of harmful metallic 
additives in gasoline, help avoid build-up of deposits in your engine and emission  
control system.  
For further important fuel-related information for your vehicle, or on information on 
gasoline that does not contain MMT, visit  www.hondacars.com. In Canada, visit 
www.honda.ca  for additional information on gasoline. For more information on top 
tier gasoline, visit  www.toptiergas.com .
■ Fuel tank capacity: 13.2 US gal (50 liters)
How to Refuel
1.Stop your vehicle with the service station  
pump on the left side of the vehicle in the rear.
2. Turn off the engine.
3. Push on the fuel fill door release handle at 
the foot of the driver’s seat.
uThe fuel fill door opens.
1How to Refuel
3WARNING
Gasoline is highly flammable and explosive.  
You can be burned  or seriously injured 
when handling fuel. • Stop the engine, and keep heat, sparks,  
and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
Push  
Page 237 of 345

uuRefuelinguHow to Refuel
236
Driving
4. Remove the fuel fill cap slowly. If you hear a  
release of air, wait until this stops, then turn  
the knob slowly to open the fuel fill cap.
5. Place the fuel fill cap in the holder.
6. Insert the filler nozzle fully.
uWhen the tank is full, the fuel nozzle will  
click off automatically. This leaves space  
in the fuel tank in case the fuel expands  
with a change in the temperature.
7. After filling, replace the fuel fill cap,  
tightening it until you hear it click at least  
once.
uShut the fuel fill door by hand.
1How to Refuel 
The filler nozzle automatically stops to leave space in  
the fuel tank so that fuel does not overflow as a result  
of changes in air temperature. 
If the fuel nozzle keeps turning off when the tank is  
not full, there may be a problem with the pump's fuel  
vapor recovery system. Try filling at another pump. If  
this does not fix the problem, consult a dealer. 
Do not continue to add fuel after the nozzle has  
automatically stopped. Additional fuel can exceed  
the full tank capacity.
Cap
Cap
Holder   
Page 238 of 345

237
Driving
Fuel Economy
Improving Fuel Economy 
Fuel economy depends on several conditions, including driving conditions, your  
driving habits, the condition of your vehicle, and loading. Depending on these and  
other conditions, you may or may not achieve the rated fuel economy of this vehicle.
You can optimize your fuel economy with proper maintenance of your vehicle. 
Always maintain your vehicle in accordance with the messages displayed on the  information display *
/multi-information display *
.
• Use the recommended viscosity engine oil, displaying the API Certification Seal.
• Maintain the specified tire pressure.
• Do not load the vehicle with excess cargo.
• Keep your vehicle clean. A buildup of snow or mud on your vehicle's underside 
adds weight and increases wind resistance.
■Maintenance and Fuel Economy
1Improving Fuel Economy 
Direct calculation is the recommended method to  
determine actual fuel consumed while driving. 
In Canada, posted fuel economy numbers are  
established following a simulated test. For more 
information on how this test is performed, please visit  
http://oee.nrcan.gc.ca/
Miles driven Gallons of 
fuel Miles per 
Gallon
100 Liter Kilometers L per 100 km
* Not available on all models 
Page 241 of 345

240
Maintenance
Before Performing Maintenance
Inspection and Maintenance 
For your safety, perform all listed inspections and maintenance to keep your vehicle  
in good condition. If you become aware of any abnormality (noise, smell, insufficient  
brake fluid, oil residue on the ground, etc.), have your vehicle inspected by a dealer.  
(Note, however, that service at a dealer is not mandatory to keep your warranties in 
effect.) Refer to the separate maintenance booklet for detailed maintenance and  inspection information. ■Daily inspections
Perform inspections before long distance trips, when washing the vehicle, or when  refueling. ■ Periodic inspections
• Check the automatic transmission fluid level monthly.
2 Automatic Transmission Fluid  P. 263
• Check the brake fluid level monthly.
2 Brake/Clutch Fluid  P. 266
• Check the tire pressure monthly. Examine the tread for wear and foreign objects.
2 Checking and Maintaining Tires  P. 280
• Check the operation of the exterior lights monthly.
2 Replacing Light Bulbs  P. 268
• Check the condition of the wiper blades at least every six months.
2 Checking and Maintaining Wiper Blades  P. 278
■Types of Inspection and Maintenance
1Inspection and Maintenance 
Maintenance, replacement, or repair of  
emissions control devices and systems may be  
done by any automotive repair establishment or 
individuals using parts that are "certified" to  EPA standards. 
According to state and federal regulations, failure to  
perform maintenance on the maintenance main  
items marked with # will not void your emissions  
warranties. However, all maintenance services should  
be performed in accordance with the intervals  
indicated by the information display *
/multi-
information display *
.
2 Maintenance Service Items  P. 245, 249
If you want to perform complex maintenance tasks  
that require more skills and tools, you can purchase a  
subscription to the Service Express website at 
www.techinfo.honda.com .
2 Authorized Manuals  P. 335
If you want to perform maintenance yourself, make  
sure that you have the necessary tools and skills first. 
After performing maintenance, update the records in 
the separate maintenance booklet.
U.S. models
* Not available on all models 
Page 242 of 345

241
uuBefore Performing MaintenanceuSafety When Performing Maintenance
Maintenance
Safety When Performing Maintenance 
Some of the most important safety precautions are given here. 
However, we cannot warn you of every conceivable hazard that can arise in 
performing maintenance. Only you can decide whether or not you should perform 
a given task. • To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames  
away from the battery and all fuel related parts.
• To clean parts, use a commercially available degreaser or parts cleaner, not  
gasoline.
• Wear eye protection and protective clothing when working with the battery or  
compressed air.
• Engine exhaust contains carbon monoxide, which is poisonous and can kill you.
uOnly operate the engine if there is sufficient ventilation.
• The vehicle must be in a stationary condition.
uMake sure your vehicle is parked on level ground, the parking brake is set, and  
the engine is off.
• Be aware that hot parts can burn you.
uMake sure to let the engine and exhaust system cool thoroughly before  
touching vehicle parts.
• Be aware that moving parts can injure you.
uDo not start the engine unless instructed, and keep your hands and limbs away  
from moving parts.
■Maintenance Safety
■Vehicle Safety
1Safety When Performing Maintenance
3WARNING
Improperly maintaining this vehicle or  
failing to correct a problem before driving 
can cause a crash in which you can be  
seriously hurt or killed. 
Always follow the inspection and  
maintenance recommendations according 
to the schedules  in this owner's manual.
3WARNING
Failure to properly follow maintenance  
instructions and precautions can cause you  
to be seriously hurt or killed. 
Always follow the procedures and  
precautions in this owner's manual. 
Page 256 of 345

255
uuMaintenance Under the HooduOil Check
Continued
Maintenance
Oil Check 
We recommend that you check the engine oil level every time you refuel. 
Park the vehicle on level ground. 
Wait approximately three minutes after turning the engine off before you check the  
oil.1.Remove the dipstick (orange handle).
2. Wipe the dipstick with a clean cloth or paper towel.
3. Insert the dipstick back all the way into its  
hole.
1Oil Check 
If the oil level is near or below the lower mark, slowly  
add oil being careful not to overfill.
2.4  engine models
1.8  engine models