display HONDA CIVIC COUPE 2005 7.G User Guide

In MP3 mode with In-dash CD ChangerWith In-dash CD Changer
When you press the TITLE button
while playing a disc in MP3, the
displayshowsthefirst13characters
of the current f older or f ile name f or
about 5 seconds, then automatically
returns to the normal display.
With the f older or f ile name, you will
see the FOLDER or FILE indicator
in the display.
Each time you press the TITLE
button, the display mode changes
f rom File Name display to Folder
Name display, then to Normal
display.
If thefolderorfilenamehasmore
than 13 characters and the name is
displayed, press and hold the TITLE
button until you hear a beep. The
display will show the next 13
characters f or about 5 seconds. Tosee all characters of the f older or f ile
name, repeat this step.
If you press the TITLE button when
the last character(s) is displayed,
you hear two beeps, then the display
shows the f irst 13 characters again.
You will also see the f older or f ile
name in the f ollowing conditions:
When the f older or the f ile is
changed.
When you change the audio mode
to play discs in MP3 and the
system begins to play.
When you insert a disc and the
system begins to play. You can use the SEEK/SKIP bar
while a disc is playing to select
passages and change tracks (f iles in
MP3 mode).
To select a dif f erent disc, press the
appropriate preset button (1 to 6). If
you select an empty position, the
system will go into the loading
sequence (see page ).
In MP3 mode, use the FOLDER bar
to select f olders in the disc and use
the SEEK/SKIP bar to change files.
101
Folder Name and File Name Display
Function T o Change or Select T racks/Files
Playing a Disc
102
——y
y
(%y
y

µµ
µ µ
Each time you
press and release the / side of the SEEK/SKIP bar,
the player skips forward to the
beginning of the next track (f ile in
MP3 mode). Press and release the / side, to skip backward
to the beginning of the current track.
Press it again to skip to the
beginning of the previous track.
To move rapidly within a track, press
andholdthe / or /
side of the SEEK/SKIP bar.
You will see CUE or REW in the
display while moving.
While moving forward or backward,
thetimedisplaychangestothe
track/f ile playing time. Af ter
releasing the bar, the display goes
back to the time display. To
select a different folder, press and
release the ‘‘ ’’ side of the
FOLDER bar to move the beginning
of the next f older. Press and release
the‘‘ ’’sidetomovethe
beginning of the current f older.
Press and release it again to skip to
the beginning of the previous f older.
To continuously replay
a track (f ile in MP3 mode), press and
release the RPT button. You will see
RPT in the display. Press the RPT
button again to turn it off. With the
in-dash CD changer, press the RPT
button two or three times depending
on the selected mode to return to
normal playing. Pressing either side of the SEEK/
SKIP bar or selecting a dif f erent disc
with a preset button also turns of f
the repeat f eature.
This feature,
when activated, replays all the tracks
(all f iles in each f older in MP3 mode)
on the selected disc in the order they
are recorded on the disc. To activate
the disc repeat f eature, select the
Disc-Repeat mode by pressing the
RPT button repeatedly. You will see
D-RPT in the display. The system
continuously replays the current disc.
Press the RPT button again to turn it
off. Pressing the RDM button or
selecting a dif f erent disc with a
preset button also turns of f the
repeat feature.
Except f or models with in-dash CD
changer
On models with in-dash CD changer In MP3 mode with In-dash CD Changer With In-dash CD Changer
With In-dash CD Changer
CONT INUED
SEEK /SK IPFOLDER SELECTION
REPEAT (TRACK/FILE
REPEAT)DISC-REPEA T
Playing a Disc
Features
103
——y

y
(%y
y

µµ µ
In MP3 mode with In-dash CD Changer
In CD mode with In-dash CD Changer In MP3 mode with In-dash CD Changer
With In-dash CD Changer In MP3 mode with In-dash CD Changer
This feature,
when activated, replays all the f iles
on the selected f older in the order
they are compressed in MP3. To
activate Folder Repeat mode, press
the RPT button. You will see F-RPT
in the display. The system
continuously replays the current
folder. Press the RPT button again to
turn it off. Pressing the RDM button,
selecting a dif f erent disc with a
preset button, or selecting a dif f erent
folder with the FOLDER bar also
turns of f the repeat f eature. This f eature plays the
tracks (all f iles in each f older in MP3
mode) within a disc in random order.
To activate Random Play, press and
release the RDM button. In MP3
mode, press the RDM button twice
to select Within a Disc Random Play.
You will see RDM in the display.
Press the RDM button again to
return to normal play.
Selecting a dif f erent disc with a
preset button also turns of f the
random f eature. This
f eature, when activated, plays the
f iles within a f older in random order,
rather than in the order they are
compressedinMP3.Toactivate
Folder Random play, press the RDM
button. You will see F-RDM in the
display. The system will then select
and play f iles randomly. This
continues until you deactivate Folder
RandomPlaybypressingtheRDM
button again, or you select a
dif f erent disc with a preset button or
a different folder with the FOLDER
bar.
Each time you press and release the
RDM button, the mode changes
f rom Folder Random Play to Within
a Disc Random Play, then to normal
playing.
Each time you press and release the
RPT button, the mode changes f rom
File Repeat to Folder Repeat to Disc
Repeat, then to normal playing.
Each time you press and release the
RPT button, the mode changes from
Track Repeat to Disc Repeat, then to
normal playing.
FOL DER-REPEA T
RANDOM (Random within a
Disc)FOLDER-RANDOM
Playing a Disc
104
——y

y
(%y
y

µµ
In CD mode with In-dash CD Changer In MP3 mode with In-dash CD ChangerExcept f or models with in-dash CDchanger
The SCAN f unction
samples all the tracks on the
selected disc in the order they are
recorded on the disc. To activate the
Scan f eature, press and hold the
SCAN button until you hear a beep.
You will see SCAN in the display.
You will get a 10 second sampling of
each track on the selected disc.
Press the SCAN button again to get
out of the system and play the last
track sampled.
Pressing either side of the SEEK/
SKIP bar or selecting a dif f erent disc
with a preset button also turns of f
the scan feature. This f eature, when
activated, samples all the files in the
selected f older in the order they are
compressedinMP3.Toactivatethe
Folder Scan f eature, press and hold
the SCAN button until you hear a
beep. You will see F-SCAN in the
display. The system will then play
the f irst f ile f or about 10 seconds. If
you do nothing, the system will then
play the f ollowing f iles f or 10
seconds each. When it plays a f ile
that you want to continue listening to,
press the SCAN button again.
Pressing either side of the SEEK/
SKIP bar, selecting a dif f erent disc
with a preset button, or a dif f erent
folder with the FOLDER bar also
turns off the scan feature. Press the eject button ( ) to
remove the CD. If you eject the CD,
but do not remove it f rom the slot,
the system will automatically reload
the CD af ter 15 seconds and put it in
pause mode. To begin playing, press
the CD button.
Press the AM/FM button to switch
to the radio while a CD is playing. To
play the CD, press the CD button.
If a tape is in the optional tape player,
press the TAPE button to switch to
the tape while a CD is playing. Press
the CD button again to switch back
to the CD player.
CONT INUED
SCAN F-SCAN
To Stop Playing a Disc
Playing a Disc
Features
105
——y
y
(%y
y

µ´µ
´
On models with in-dash CD changer
Except f or models with in-dash CDchanger
On models with in-dash CD changer Except f or models with in-dash CD
changer
The auxiliary input jack is on the
audio panel. The system will accept
auxiliary input f rom standard audio
accessories.
When the appropriate audio unit is
connected with the auxiliary input
jack, press the AUX button to select
the unit.
See pages and for
inf ormation on the error messages.
If you f ind any problem with this
audio system, take the vehicle to
your dealer.
For inf ormation on how to handle
and protect discs, see page . If you select an empty slot in the
magazine, the changer will search
f or the next available disc to load and
play.
An optional six disc CD changer is
available f or your vehicle. This disc
changer uses the same controls used
f or the in-dash CD player or the
radio.
Load the desired CDs in the
magazine, and load the magazine in
the changer according to the
instructions that came with the unit.
To select the CD changer, press the
CD button. The disc and track
numbers will be displayed. To select
a dif f erent disc, use the preset 5
(DISC ) or the preset 6 (DISC )
button. To select the previous disc,
press the preset 5 (DISC ), or the
preset 6 (DISC ) to select the next
disc in sequence.
109
110
108
Playing a Disc
Auxiliary Input Jack
Audio System Malf unction
Protecting Discs Operating the Optional CD
Changer
Features
107
——y
y
(%y

y

Error Message Cause Solution
If you see an error message in the
display while playing a disc, f ind the
cause in the chart to the right. If you
cannot clear the error message, take
your vehicle to your dealer.
Except f or models with in-dash CDchanger
FOCUS Error
Mechanical Error
High temperature Press the EJECT button and pull out the disc.
Check if it is inserted correctly in the discplayer.
Make sure the disc is not scratched or damaged.
Press the EJECT button and pull out the disc.
Check the disc for damage or deformation.
If the disc cannot be pulled out, or the error
message does not disappear after the disc is
ejected, see your dealer.
Will disappear when the temperature returns to
normal.
CD Player Error Messages
Features
109
——y
y
(%y

y

Error MessageSolution
CauseExcept f or models with in-dash CD
changer
If you see an error message in the
display while playing a disc, f ind the
cause in the chart to the right. If you
cannot clear the error message, take
your vehicle to your dealer.Press the magazine eject button and pull it out.
If the message does not disappear or the
magazine cannot be pulled out, see your dealer.
Insert disc.
Press the magazine eject button and pull it out,
check f or an error message, and insert the
magazine again. If the message does not
disappear or the magazine cannot be pulled out,
see your dealer.
Will disappear when the temperature returns to
normal.
Insert disc magazine.
FOCUS Error
No disc in the disc magazine
Mechanical Error
High temperature
No disc magazine in the
disc changer
CD Changer Error Messages
110
——y

y
(%y

y

µ
µ
Û
Î
Î
To switch to the radio or CD player
while a tape is playing, press the
AM/FM or CD/TAPE button. To
change back to the tape player, press
the CD/TAPE button.
To rewind the tape,
push the REW button. You will see
REW in the display. To f ast f orward
the tape, push the FF button. You
will see FF displayed. Press the FF,
REW, or PLAY/PROG button to
take the system out of rewind or fast
forward.
Press button to find
the beginning of the current song or
passage. Press button to f ind
the beginning of the next song or
passage. When the system reaches
the beginning of a song or passage, it
begins to play it.
The ignition switch must be in
ACCESSORY (I) or ON (II). Make
sure the open side of the tape is
facing right, then insert the tape
most of the way into the slot. The
system will pull the tape in the rest
of the way, and begin to play it.
The tape direction indicator will
come on to show you which side of
the tape is playing. The indicates
the side you inserted upward is now
playing. If you want to play the other
side, press the PLAY/PROG button.
When the player reaches the end of
the tape, it will automatically reverse
direction and play the other side. Dolby noise reduction turns on
when you insert a tape. The
indicator will come on in the
display. If the tape was not recorded
in Dolby, turn it of f by pressing the
NR button. Dolby remains of f until
you press the NR button again.
To remove the tape, press the eject
button on the tape player. If you
want to turn the player off, press the
Power/Volume knob or turn of f the
ignition. The tape will remain in the
drive. When you turn the system
back on, the tape will begin playing
where it lef t of f .
Tape player is optional except f or
models with in-dash CD changer.
Dolby noise reduction is manuf actured under
license from Dolby Laboratories Licensing
Corporation. ‘‘DOLBY’’ and the double-D symbol are trademarks of Dolby Laboratories
Licensing Corporation.
To Play a Tape
To Stop Playing a TapeT ape Search Functions
FF/REW
SK IP
Playing a T ape (Opt ional)
112
——y
y
(%y

y

µPress the RPT button
to continuously play a song or
passage. You will see RPT displayed.
The track will repeat until you press
the RPT button again.
The SKIP and REPEAT
f unctions use silent periods on the
tape to find the end of a song or
passage. These f eatures may not
work if there is almost no gap
between selections, a high noise
level, or a silent period in the middle
of a selection. Thetapeplayerpicksupdirtand
oxides f rom the tape. This
contamination builds up over time
and causes the sound quality to
degrade. To prevent this, you should
clean the player af ter every 30 hours
of use.
If you do not clean the tape player
regularly, it may eventually become
impossible to remove the
contamination with a normal
cleaning kit. Your dealer has a
cleaning kit available.
Use 100-minute or shorter tapes.
Tapes longer than that may break or
jam the drive.
If the tape is loose, tighten it by
turning the hub with a pencil or your
f inger. If the label is peeling of f ,
remove it or it could cause the
cassette to jam in the player. Never
try to insert a warped or damagedcassette in the player.
Store tapes in their cases to protect
them f rom dust and moisture. Never
place tapes where they will be
exposed to direct sunlight, high heat,
or high humidity. If a tape is exposed
to extreme heat or cold, let it reach a
moderate temperature bef ore
inserting it into the player.
Never try to insert f oreign object
into the tape player.
REPEAT Caring f or the Tape and Player
Playing a T ape (Opt ional)
Features
113
NOTE:
——y
y
(%y

y

Your vehicle’s audio system will
disable itself if it is disconnected
f rom electrical power f or any reason.
To make it work again, the user
must enter a specif ic f ive-digit code
in the Preset buttons. Because there
are hundreds of number
combinations possible f rom the f ive-
digits, making the system work
without knowing the exact code is
nearly impossible.
Youshouldhavereceivedacardthat
lists your audio system’s code and
serial numbers. It is best to store this
card in a saf e place at home. In
addition, you should write the audio
system’s serial number in this
Owner’s Manual.
If you lose the card, you must obtain
the code number f rom a dealer. Todo this, you will need the system’s
serial number.
If your vehicle’s battery is
disconnected or goes dead, or the
radio f use is removed, the audio
system will disable itself . If this
happens, you will see ‘‘ ’’
(except for models with
in-dash CD changer)/‘‘CODE’’
(on models with in-dash CD
changer) in the f requency display
the next time you turn on the system.
Use the preset buttons to enter the
f ive-digit code. The code is on the
radio code card included in your
Owner’s Manual kit. When it is
entered correctly, the radio will start
playing.
If you make a mistake entering the
code, do not start over; complete the
f ive-digit sequence, then enter the
correct code. You have ten tries to
enter the correct code. If you are
unsuccessful in ten attempts, youmust then leave the system on for 1
hour bef ore trying again.
You will have to store your favorite
stations in the preset buttons after
the system begins working. Your
original settings were lost when the
power was disconnected.
Standard f or Value Package, HX, LX, EX
and Special Edition models in the U.S.,and DX Special Edition, REVERB, LXandSimodelsinCanada
Radio T hef t Prot ect ion
114
——y
y
(%y

y