CD changer HONDA CIVIC COUPE 2005 7.G Owners Manual

Playing the Radio
92
AM/FM BUTTONTUNE KNOB
SCAN INDICATOR
SEEK BAR PRESET BUTTONS TUNE KNOB
SCAN INDICATOR
STEREO INDICATOR
AM/FM BUTTON STEREO INDICATOR
SEEK BAR
FM/AM
BUTTON
SEEK BAR
AUTO SELECT
BUTTON
SOUND
BUTTON
SCAN
BUTTONPRESET BUTTONS
PRESET BUTTONS
SCAN
BUTTON
AUTO SELECT BUTTON
PRESET BUTTONS
POWER/
VOLUMEKNOB
DX model
POWER/
VOLUMEKNOB AUTO SELECT
BUTTONPOWER/
VOLUMEKNOB
PRESET CALL BAR
SCAN BUTTON
Audio System with In-dash CD Changer
STEREO INDICATOR
U.S. :Special Edition models
Canada:REVERB, Si-GA models
U.S.: Value Package, HX, LX, EX models
Canada: DX Special Edition, LX, Si-G models
——y
y
(%yy

µµ
µ
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
Power Volume knob or the AM/FM
button (FM/AM button on models
with in-dash CD changer). Adjust the
volume by turning the Power
Volume knob.
As you adjust a volume, you will hear
a beep whenever the adjustment
level reaches the maximum and
minimum of its range.
The band and f requency that the
radio was last tuned to is displayed.
To change bands, press the AM/FM
or FM/AM button. On the FM band,
ST will be displayed if the station is
broadcasting in stereo. Stereo
reproduction on AM is not available. On the AM band, AM noise
reduction turns on automatically.
You can use any of f ive methods to
f ind a radio station on the selected
band: the
preset buttons, and .
Use the TUNE knob or
the SEEK bar to tune the radio to a
desired f requency.
Turn the knob to the right to tune a
higher f requency, and turn it to the
lef t to tune a lower f requency.
Press the side of the SEEK bar
to tune a higher f requency, and
press the side to tune a lower
f requency. The SEEK f unction
searches up and down f rom the
current f requency to f ind a station
with a strong signal. To activate it,
press the or side of the
SEEK bar, then release it.
On models with in-dash CD changer,
press the or side of the
SEEK bar until you hear a beep, then
release it.
The SCAN function
samples all stations with strong
signals on the selected band. To
activate it, press the SCAN button,
then release it. You will see SCAN in
the display. The system will scan f or
a station with a strong signal. When
it f inds one, it will stop and play that
station for about 5 seconds.On models with in-dash CD changer On models with in-dash CD changer
Except f or models with in-dash CDchanger
On models with in-dash CD changer Except f or models with in-dash CD
changer
CONT INUED
Playing the Radio
To Play the Radio
To Select a StationTUNE,SEEK,SCAN, AUTO SELECT
TUNE SEEK
SCAN
Features
93
——y
y
(%yy

µ
µ
Press the A. SEL button. ‘‘A.SEL’’
f lashes in the display, and the system
goes into scan mode f or several
seconds. It stores the f requencies of
six AM, and twelve FM stations in
the preset buttons.
You will see a ‘‘0’’ displayed af ter
pressing a preset button if Auto
Select cannot f ind a strong station
f or every preset button.
If you do not like the stations Auto
Select has stored, you can store
other f requencies on the preset
buttons as previously described.
press the
A. SEL button. This restores the
presets you originally set.
If you are
traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find stations in the local area.
To select a dif f erent preset
f requency, you can also use the
Preset CALL bar. Press the ‘‘ ’’
side of the bar to select the
f requency stored in the next preset
button, and press the ‘‘ ’’ side to
select the f requency in the previous
preset button.
The preset f requencies will be lost
if your vehicle’s battery goes dead,
is disconnected, or the radio f use
is removed.
If you do nothing, the system will
then scan f or the next strong station
andplayitfor5seconds.Whenit
plays a station that you want to listen
to, press the SCAN button again.
Each preset button can
store one f requency on AM, and two
f requencies on FM.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
Pick a preset button, and hold it
until you hear a beep.
UsetheTUNE,SEEK,orSCAN
function to tune the radio to a
desired station.
Select the desired band, AM or
FM. FM1 and FM2 let you store
two f requencies with each preset
button.
1. 2. 3. 4.
To turn of f Auto Select,
On models with in-dash CD changer
Playing the Radio
AUTO SELECT
Preset
94
——y

y
(%yy

µµ
µ µ
CONT INUED
Adjust the Balance, or side-
to-side strength of the sound.
Adjust the Fader, or the
f ront-to-back strength of the sound.
AdjusttheTrebleinthe
sound.
Adjust the Bass in the sound.
Press the SOUND (TUNE) knob or
SOUND button repeatedly to display
the Bass (BAS), Treble (TRE),
Balance (BAL), and Fader (FAD)
settings. Each mode is shown in the
display as it changes. Turn the SOUND (TUNE) knob to
adjust the setting to your liking.
Turn the Volume knob to adjust the
setting to your liking.
The displayed number shows you
the current setting. When the level
reaches the center, you will see a ‘‘C’’
in the display. The system will return
to the audio display about 5 seconds
af ter you stop adjusting a mode.
The level gauge on the display also
shows you the range. As you adjust a
mode, you will hear a beep whenever
the adjustment level reaches the
center (C), maximum, and minimum
of its range.
Except f or models with in-dash CD
changer
On models with in-dash CD changer On all models On models with in-dash CD changer
Playing the Radio
Adjusting the Sound
BAL
FAD
TRE
BAS
Features
95
——y
y
(%yy

On models with in-dash CD changerOn models with in-dash CD changer
You can display the sound with
spectroscopic analysis. There are
five modes of display; Peak-Hold,
Normal, Aurora, Level and Off. Each
time you press and release the DISP
button, the mode changes f rom P.
HOLD to NORMAL to AURORA to
LEVEL, then to OFF. You see the
selected mode in the display f or
about 5 seconds as it changes.You can use the instrument panel
brightness control knob to adjust the
illumination of the audio system (see
page ). The audio system
illuminates when the parking lights
are on, even if the radio is turned of f .
You can also select the reduced
brightness in the display when the
parking lights are on. Press and hold
the DISP button for about 5 seconds
until you hear a beep to change the
brightness. Press and hold this
button again f or about 5 seconds
until you hear a beep to return to the
f ull brightness.
63
Playing the Radio
Spect roscopic A nalysis
Display bright ness
A udio System L ighting
96
——y
y
(%yy

µ´
Playing a Disc
Features
99
AM/FM BUTTON
POWER/
VOLUMEKNOB
DX model
CD/TAPE BUTTON RANDOM BUTTON
REPEAT
BUTTON
DISC BUTTON DISC BUTTON
SEEK/SKIP BAR
POWER/VOLUMEKNOB
AM/FM
BUTTON CD BUTTON
CD SLOTREPEAT INDICATOR
RANDOM BUTTON
EJECT
BUTTON
REPEAT BUTTON
RANDOM INDICATOR
SEEK/ SKIP BAR LOAD BUTTON
LOADED DISC
NUMBER FOLDER INDICATOR/
NUMBER
FILE
INDICATOR/
NUMBER
DISC SLOT
DISC LOAD
INDICATOR DISPLAY
BUTTON
SEEK/SKIP
BAR
CD
BUTTON
DISC
NUMBER
RANDOM
BUTTON
FOLDER
BAR
POWER/
VOLUME KNOB
RANDOM INDICATOR
REPEAT
INDICATOR
TITLE BUTTONEJECT
BUTTON
RREPEAT BUTTON/
SCAN BUTTON
MP3 INDICATOR
Audio System with In-dash CD ChangerU.S.: Special Edition models
Canada: REVERB, Si-GA models
U.S.: Value Package, HX, LX, EX models
Canada: DX Special Edition, LX, Si-G models
——y
y
(%y
y

µ µ µ µ
On models with in-dash CD changerOn models with CD player
Optional on DX model
The in-dash CD changer can also
play CD-Rs and CD-RWs
compressed in MP3 standard. When
playing a disc in MP3, you will see
‘‘MP3’’ in the display. You can select
afolderortrackupto .
Video CDs and DVD discs will not
work in this unit.
The specif ications of the compatible
MP3 f ile are:
You operate the CD player/CD
changer with the same controls used
for the radio. To select the CD
player/CD changer, press the CD
button. You will see ‘‘CD’’ in the
display. The number of the track
playing is shown in the display. With
the in-dash CD changer, the disc and
track numbers are displayed. The
system will continuously play a disc
until you change modes.
To load or play discs, the ignition
switch must be in the ACCESSORY
(I) or ON (II) position.
Sampling f requency: 32/44.1/48kHz
Bit rate: 32/40/48/56/64/80/96/
112/128/160/192/224/256/
320 kbps
Compatible with variable bit rate
and multi-session
Maximum layers
(including ROOT): 8 layersWhile playing a disc, you can see the
playing time in the display by
cancelling the clock display (see
page ).
Insert a CD into the CD slot. The
drive will pull the CD in the rest of
the way to play it. When the system
reaches the end of the disc, it will
return to the beginning and play the
disc again.
You can also play 3-inch (8-cm) discs
without using an adapter ring.
To play the radio when a disc is
playing, press the AM/FM button.
Press the CD button again to switch
back to the CD player.
255
116
To Play a Disc
Playing a Disc
100
Do not use discs with adhesive labels.
The label can curl up and cause the
disc to jam in the unit.
——y

y
(%y
y

On models with in-dash CD changer
Your vehicle’s in-dash CD changer
hold up to six discs.Press the LOAD button until you
hear beep and see ‘‘LOAD’’ in the
display. To load only one disc,
press and release the LOAD
button. The green disc load
indicator will come on.
The disc number f or an empty
position begins blinking. You cannot load and play 3-inch
(8-cm) discs in this unit.
When the disc load indicator turns
green and ‘‘LOAD’’ appears in the
display again, insert the next disc
in the slot. Do not try to insert a
disc until ‘‘LOAD’’ appears. You
could damage the audio unit.
Repeat this until all six positions
are loaded. If you are not loading
all six positions, the system begins
playing the last disc loaded.
You can also load a disc into an
empty position while a disc is playing
by pressing the appropriate preset
button. The system stops playing the
current disc and starts the loading
sequence. It plays the disc just
loaded.
Insert the disc into the disc slot
when the green disc load indicator
comes on. Insert it only about
half way; the drive will pull it in the
rest of the way. You will see
‘‘BUSY’’ in the display while the
disc load indicator turns red and
blinks as the disc is loaded.
To play the tape when a CD is
playing, insert a tape in the player
(optional). If a tape is in the player,
press the TAPE button. Press the
CD button again, to switch back to
the CD player.
If you turn the system of f while a CD
is playing, either with the Power/
Volume knob or by turning of f the
ignition switch, the disc will stay in
the drive. When you turn the system
back on, the CD will begin playing
where it lef t of f .
1. 2. 3.4. 5.
CONT INUED
L oading Discs in t he In-dash CD
Changer
Playing a Disc
Features
101
——y
y
(%y
y

In MP3 mode with In-dash CD ChangerWith In-dash CD Changer
When you press the TITLE button
while playing a disc in MP3, the
displayshowsthefirst13characters
of the current f older or f ile name f or
about 5 seconds, then automatically
returns to the normal display.
With the f older or f ile name, you will
see the FOLDER or FILE indicator
in the display.
Each time you press the TITLE
button, the display mode changes
f rom File Name display to Folder
Name display, then to Normal
display.
If thefolderorfilenamehasmore
than 13 characters and the name is
displayed, press and hold the TITLE
button until you hear a beep. The
display will show the next 13
characters f or about 5 seconds. Tosee all characters of the f older or f ile
name, repeat this step.
If you press the TITLE button when
the last character(s) is displayed,
you hear two beeps, then the display
shows the f irst 13 characters again.
You will also see the f older or f ile
name in the f ollowing conditions:
When the f older or the f ile is
changed.
When you change the audio mode
to play discs in MP3 and the
system begins to play.
When you insert a disc and the
system begins to play. You can use the SEEK/SKIP bar
while a disc is playing to select
passages and change tracks (f iles in
MP3 mode).
To select a dif f erent disc, press the
appropriate preset button (1 to 6). If
you select an empty position, the
system will go into the loading
sequence (see page ).
In MP3 mode, use the FOLDER bar
to select f olders in the disc and use
the SEEK/SKIP bar to change files.
101
Folder Name and File Name Display
Function T o Change or Select T racks/Files
Playing a Disc
102
——y
y
(%y
y

µµ
µ µ
Each time you
press and release the / side of the SEEK/SKIP bar,
the player skips forward to the
beginning of the next track (f ile in
MP3 mode). Press and release the / side, to skip backward
to the beginning of the current track.
Press it again to skip to the
beginning of the previous track.
To move rapidly within a track, press
andholdthe / or /
side of the SEEK/SKIP bar.
You will see CUE or REW in the
display while moving.
While moving forward or backward,
thetimedisplaychangestothe
track/f ile playing time. Af ter
releasing the bar, the display goes
back to the time display. To
select a different folder, press and
release the ‘‘ ’’ side of the
FOLDER bar to move the beginning
of the next f older. Press and release
the‘‘ ’’sidetomovethe
beginning of the current f older.
Press and release it again to skip to
the beginning of the previous f older.
To continuously replay
a track (f ile in MP3 mode), press and
release the RPT button. You will see
RPT in the display. Press the RPT
button again to turn it off. With the
in-dash CD changer, press the RPT
button two or three times depending
on the selected mode to return to
normal playing. Pressing either side of the SEEK/
SKIP bar or selecting a dif f erent disc
with a preset button also turns of f
the repeat f eature.
This feature,
when activated, replays all the tracks
(all f iles in each f older in MP3 mode)
on the selected disc in the order they
are recorded on the disc. To activate
the disc repeat f eature, select the
Disc-Repeat mode by pressing the
RPT button repeatedly. You will see
D-RPT in the display. The system
continuously replays the current disc.
Press the RPT button again to turn it
off. Pressing the RDM button or
selecting a dif f erent disc with a
preset button also turns of f the
repeat feature.
Except f or models with in-dash CD
changer
On models with in-dash CD changer In MP3 mode with In-dash CD Changer With In-dash CD Changer
With In-dash CD Changer
CONT INUED
SEEK /SK IPFOLDER SELECTION
REPEAT (TRACK/FILE
REPEAT)DISC-REPEA T
Playing a Disc
Features
103
——y

y
(%y
y