maintenance HONDA CR-V 2016 RM1, RM3, RM4 / 4.G Workshop Manual

455
uuReplacing Light Bulbs uFront Turn Signal/Side Marker Light/Parking Light Bulbs
Maintenance
Front Turn Signal/Side Marker Light/Parking Light
Bulbs
When replacing, use the following bulbs.
1.Turn the socket to th e left and remove it,
then remove the old bulb.
2. Insert a new bulb.
Front Turn Signal/Side Marker Ligh t/Parking Light: 28/8 W (Amber)
Models without smart entry system
Bulb
Socket
15 CR-V-31T0A6300.book 455 ページ ２０１５年２月２日　月曜日　午前１０時３５分

456
uuReplacing Light Bulbs uFront Turn Signal/Side Marker Light Bulbs
Maintenance
Front Turn Signal/Side Marker Light Bulbs
When replacing, use the following bulbs.
1.Turn the socket to the left and remove it,
then remove the old bulb.
2. Insert a new bulb.
Parking Light Bulbs
Parking light bulbs are LED type. Have an authorized Honda dealer inspect and
replace the light bulbs.
Front Turn Signal/Side Mark er Light: 28/8 W (Amber)
Models with smart entry system
Bulb
Socket
Models with smart entry system
15 CR-V-31T0A6300.book 456 ページ ２０１５年２月２日　月曜日　午前１０時３５分

457
uuReplacing Light Bulbs uSide Turn Signal/Emergency Indicator Light Bulbs*
Continued
Maintenance
Side Turn Signal/Emerge ncy Indicator Light Bulbs*
Door mirrors have the side turn lights. Ha ve an authorized Honda dealer inspect and
replace the light assembly.
Brake Light, Taillight, Back-Up Light, Rear Turn
Signal Light and Lower Rear Side Marker Light Bulbs
When replacing, use the following bulbs.
1.Use a Phillip-head screwdriver to remove
the bolts.
2. Pull the light assembly out of the rear pillar.
Lower Rear Side Marker/Brake/Taillight: 21/5W
Back-Up Light: 21W
Rear Turn Signal Light: 21W (Amber)
1Brake Light, Taillight, Back-Up Light, Rear Turn Signal Light and
Lower Rear Side Marker Light Bulbs
If it is difficult to remove the light assembly, remove
the cap.
Cap
Bolts
* Not available on all models
15 CR-V-31T0A6300.book 457 ページ ２０１５年２月２日　月曜日　午前１０時３５分

458
uuReplacing Light Bulbs uBrake Light, Taillight, Back-Up Light, Rear Turn Si gnal Light and Lower Rear Side Marker Light Bulbs
Maintenance
3.Turn the socket to the left and remove it.
Remove the old bulb.
4. Insert a new bulb.
5. Reinstall the light assembly by sliding it on
to the guide on the body.
Bulb Socket
Guide
15 CR-V-31T0A6300.book 458 ページ ２０１５年２月２日　月曜日　午前１０時３５分

459
uuReplacing Light Bulbs uUpper Rear Side Marker/Taillight Bulbs
Maintenance
Upper Rear Side Ma rker/Taillight Bulbs
When replacing, use the following bulbs.
1.Remove the lower taillight assembly.
2 Brake Light, Taillight, Back-Up Light, Rear Turn Signal Light and Lower Rear
Side Marker Light Bulbs P. 457
2.Use a Phillip-head screwdriver to remove
the bolt.
3. Pull the light assembly out of the rear pillar.
4. Turn the socket to th e left and remove it.
Remove the old bulb.
5. Insert a new bulb.
Upper Rear Side Marker/Taillight: 3CP
Bolt
Bulb
Socket
15 CR-V-31T0A6300.book 459 ページ ２０１５年２月２日　月曜日　午前１０時３５分

460
uuReplacing Light Bulbs uRear License Plate Light Bulb
Maintenance
Rear License Plate Light Bulb
When replacing, use the following bulb.
1.Push the left edge of the lens to the right
and pull out the license light assembly.
2. Push the tabs to remove the lens.
3. Remove the old bulb.
4. Insert a new bulb.
High-Mount Brake Light Bulb
High-mount brake light bulbs are LED type . Have an authorized Honda dealer
inspect and replace the light bulbs.
Rear License Plate Light: 3CP
Bulb Tab
Tab
Lens
15 CR-V-31T0A6300.book 460 ページ ２０１５年２月２日　月曜日　午前１０時３５分

461Continued
Maintenance
Checking and Maintaining Wiper Blades
Checking Wiper Blades
If the wiper blade rubber has deteriorated, it will leave streaks and the hard surfaces
of the blade may scratch the window glass.
Changing the Front Wiper Blade Rubber
1.Lift the driver side wiper arm first, then the
passenger side.
2. Push the lock tab up.
3. Slide the blade from the wiper arm.
1Changing the Front Wiper Blade Rubber
NOTICE
Avoid dropping the wiper ar m; it may damage the
windshield.
Lock Tab
15 CR-V-31T0A6300.book 461 ページ ２０１５年２月２日　月曜日　午前１０時３５分

462
uuChecking and Maintaining Wiper Blades uChanging the Front Wiper Blade Rubber
Maintenance
4. Slide the wiper blade out from its holder by
pulling the tabbed end out.
5. Remove the retainers from the rubber blade
that has been removed, and mount to a
new rubber blade.
u Correctly align the rubber protrusion and
the retainer grooves.
6. Slide the new wiper blade onto the holder
from the bottom end.
u The tab on the holder should fit in the
indent of the wiper blade.
7. Slide the wiper blade onto the wiper arm
until it clicks.
8. Lower the passenger side wiper arm first,
then the driver side.
Blade
Top Retainer
Blade
Tab Indent
15 CR-V-31T0A6300.book 462 ページ ２０１５年２月２日　月曜日　午前１０時３５分

463
uuChecking and Maintaining Wiper Blades uChanging the Rear Wiper Blade Rubber
Continued
Maintenance
Changing the Rear Wiper Blade Rubber
1.Raise the rear wiper arm up and away from
the rear window.
2. Pull up the lock tab and release the wiper
arm.
3. Slide the wiper blade out from the end with
the indent.1Changing the Rear Wiper Blade Rubber
NOTICE
Avoid dropping the wiper ar m; it may damage the
rear window.
Lock Tab
Blade
15 CR-V-31T0A6300.book 463 ページ ２０１５年２月２日　月曜日　午前１０時３５分

464
uuChecking and Maintaining Wiper Blades uChanging the Rear Wiper Blade Rubber
Maintenance
4. Remove the retainers from wiper blade and
mount to a new rubber blade.
5. Slide the wiper blade onto the holder.
u Make sure it is engaged correctly, then
install the wiper blade assembly onto the
wiper arm.Retainer
Rubber
15 CR-V-31T0A6300.book 464 ページ ２０１５年２月２日　月曜日　午前１０時３５分