brake HONDA ELEMENT 2006 1.G Owner's Guide

HONDA ELEMENT 2006 1.G Owner's Guide ELEMENT 2006 1.G HONDA HONDA https://www.carmanualsonline.info/img/13/5907/w960_5907-0.png HONDA ELEMENT 2006 1.G Owner's Guide

Page 163 of 249

HONDA ELEMENT 2006 1.G Owners Guide This section explains why it is
important to keep your vehicle well
maintained and how to f ollow basic
maintenance saf ety precautions.
This section also includes
maintenance schedules f or normal
dr

Page 164 of 249

HONDA ELEMENT 2006 1.G Owners Guide To eliminate potential hazards, read
the instructions bef ore you begin,
and make sure you have the tools
and skills required.To clean parts, use a commercially
available degreaser or parts
cleaner, n

Page 165 of 249

HONDA ELEMENT 2006 1.G Owners Guide µµ
Avoid exceeding your vehicle’s
load limit. This puts excess stress
on the engine, brakes, and many
other vehicle parts. The load limit
is shown on the tire inf ormation
label on the driver’

Page 166 of 249

HONDA ELEMENT 2006 1.G Owners Guide µµµ
µ
µ
µ
Ì
We recommend the use of Honda
parts and f luids whenever you have
maintenance done. U.S. Vehicles:
Youshouldcheckthefollowing
items at the specif ied intervals. If
you are un

Page 167 of 249

HONDA ELEMENT 2006 1.G Owners Guide ÎÌ
Ì
Ì
Î
Follow the normal maintenance
schedule if the severe driving
conditions specif ied in the severe
conditions maintenance schedule on
the next page do not apply.
NOT E: If you only OC

Page 168 of 249

HONDA ELEMENT 2006 1.G Owners Guide µ
Î
Î
Ì
ÌÌ
Î
Î
Driving less than 5 miles (8 km) per
trip or, in f reezing temperatures,
driving less than 10 miles (16 km)
per trip.
Driving in extremely hot [over 90°F
(32°C)] condi

Page 171 of 249

HONDA ELEMENT 2006 1.G Owners Guide Fluid Locations
Maint enance
169
BRAKE FLUID
(Gray cap)AUTOMATIC
TRANSMISSION
FLUID DIPSTICK
(Yellow loop)
RADIATOR CAP
ENGINE
COOLANT
RESERVOIR WASHER FLUID
(Blue cap)
ENGINE OIL
FILL CAP
POWER
STEER

Page 179 of 249

HONDA ELEMENT 2006 1.G Owners Guide Check the brake f luid level in the
reservoirs monthly.
Always use Honda Heavy Duty
Brake Fluid DOT 3. If it is not
available, you should use only DOT 3
or DOT 4 f luid, f rom a sealed
container, as a

Page 184 of 249

HONDA ELEMENT 2006 1.G Owners Guide Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.
Turn on the lights to make sure
the new bulb is working.
Put the light assembly back into
the body, bottom first

Page 186 of 249

HONDA ELEMENT 2006 1.G Owners Guide Open the hatch. Remove the light
assembly cover by pushing in on
the tabs on both sides and pulling
the cover down.
Remove the socket f rom the light
assembly by turning it one-quarter
turn counterclo