brake sensor HONDA FIT 2008 1.G Owners Manual

Make sure all items in the cargo area
are secured. Loose items can f ly
f orward and cause injury if you have
to brake hard (See
on page ).
To return the seat-back to its upright
position, move the front seat forward
again, then lift up the seat-back.
While lifting the seat-back, the seat
cushion may come up with it. To
secure the seat cushion, see page .
Make sure the seat-back and seat
cushion are locked securely and all
rear shoulder belts are positioned in
front of the rear seat-backs. In the
center seating position of the rear
seat, be sure the detachable anchor
is latched securely bef ore using the
seat belt (see page ).
Move the f ront seat backward to
the desired position. Make sure
theseatislockedinplace.
Do not put any heavy items on the
seat-back when it is folded down.
Make sure that the f olded down rear
seat does not interf ere with the f ront
passenger’s seat-back. This will
cause the f ront passenger’s weight
sensors and the f ront passenger’s
seat belt reminder indicator to work
improperly (see pages and ).
Also check the passenger airbag of f
indicator to assure proper operation
of the passenger’s front airbag.
Make sure the rear outer head
restraint is locked in place. If you
f old down the driver’s side seat-
back, also adjust the rear center
head restraint to its lowest
position.
Pull up the release lever on the
outside of the seat-back.
Fold the seat-back forward. 5.
31
18
14693 91
2.
3.
4.
Seats
Carrying Cargo
92
RELEASE LEVER
\f—\f—y\fy
(
\fy\f\fy
2008 Fit