HONDA HR-V 2020 Owner's Manual (in English)

399
uuBluetooth ® HandsFreeLink ®u HFL Menus
Continued
Features
See the previous message.
Text MessagesRead/Stop(Existing message list)
See the next message. System reads received message aloud, or
stop message from being read.
Reply to a received message using one of six
fixed phrases.
CallMake a call to the sender.
Reply
Display the last outgoing, incoming and missed calls.Call HistoryAll
Dialed
Received
Display the last outgoing calls.
Display the last incoming calls.
MissedDisplay the last missed calls.
Dial
Redial
Enter a phone number to dial. Redial the last number dialed.
PhonebookDisplay the paired phone’s phonebook.
20 HR-V HDMC HDMG-31T7A6400.book 399 ページ ２０１９年８月８日　木曜日　午後３時５２分

uuBluetooth ® HandsFreeLink ®u HFL Menus
400
Features
■To pair a cell phone (when there is no
phone paired to the system)
1. Select Phone .
2. Select Yes.
3. Make sure your phone is search or
discoverable mode, then select Continue.
u HFL automatically searches for a
Bluetooth ® device.
4. Select your phone when it appears on the
list.
u If your phone does not appear, you can
select Refresh to search again.
u If your phone still does not appear, select
Phone Not Found and search for
Bluetooth ® devices using your phone.
From your phone, search for
HandsFreeLink .
5. The system gives you a pairing code on the
audio/information screen.
u Confirm if the pairing code on the screen
and your phone match.
This may vary by phone.
■Phone Setup1Phone Setup
Your Bluetooth -compatible phone must be paired to
the system before you ca n make and receive hands-
free calls.
Phone Pairing Tips:
•You cannot pair your phone while the vehicle is
moving.
•Up to six phones can be paired.
•Your phone’s battery may dr ain faster when it is
paired to the system.
•If your phone is not ready for pairing or not found
by the system within three minutes, the system will
time out and returns to idle.
Once you have paired a phone, you can see it
displayed on the screen with one or two icons on the
right side.
These icons indicate the following: : The phone can be used with HFL.
: The phone is co mpatible with Bluetooth ® Audio.
If there is an active c onnection to Apple CarPlay
TM,
pairing of additional Bluetooth-compatible devices is
unavailable and Add Bluetooth Device is grayed
out from the Bluetooth Device List screen.
20 HR-V HDMC HDMG-31T7A6400.book 400 ページ ２０１９年８月８日　木曜日　午後３時５２分

Continued401
uuBluetooth ® HandsFreeLink ®u HFL Menus
Features
■To change the currently paired phone
1. Go to the phone settings screen.
2 Phone settings screen P. 396
2.Select Bluetooth Device List .
3. Select a phone to connect.
u HFL disconnects the connected phone
and starts searching for another paired
phone.
4. Select Connect , Connect , or
Connect .
■To change the pairing code setting
1. Select .
2. Select Settings .
3. Select Bluetooth / Wi-Fi .
4. Select the Bluetooth tab.
5. Select Edit Pairing Code .
6. Select Random or Fixed .
1To change the currently paired phone
If no other phones are found or paired when trying to
switch to another phone, HFL will inform you that the
original phone is connected again.
To pair other phones, select Add Bluetooth Device
from the Bluetooth Device List screen.
1To change the pairing code setting
The default pair ing code is 0000 until you change the
setting.
To create your own, select Fixed, and delete the
current code, then enter a new one.
For a randomly generated pa iring code each time you
pair a phone , select Random .
20 HR-V HDMC HDMG-31T7A6400.book 401 ページ ２０１９年８月８日　木曜日　午後３時５２分

402
uuBluetooth ® HandsFreeLink ®u HFL Menus
Features
■To delete a paired phone
1. Go to the phone settings screen.
2 Phone settings screen P. 396
2.Select Bluetooth Device List .
3. Select a phone you want to delete.
4. Select Delete.
5. A confirmation message appears on the
screen. Select Yes.
20 HR-V HDMC HDMG-31T7A6400.book 402 ページ ２０１９年８月８日　木曜日　午後３時５２分

Continued403
uuBluetooth ® HandsFreeLink ®u HFL Menus
Features
■To turn on or off the text message
function
1. Go to the phone settings screen.
2 Phone settings screen P. 396
2.Select Enable Text Messages .
u A pop-up menu appears on the screen.
3. Select On or Off .
■To turn on or off the text message
notice
1. Go to the phone settings screen.
2 Phone settings screen P. 396
2.Select New Message Notification .
u A pop-up menu appears on the screen.
3. Select On or Off .
■To Set Up Text Message Options1To Set Up Text Message Options
To use the text message func tion, it may be necessary
to set up on your phone.
1 To turn on or off the text message notice
On: A pop-up notification comes on every time you
receive a new message.
Off: The message you receive is stored in the system
without not ification.
20 HR-V HDMC HDMG-31T7A6400.book 403 ページ ２０１９年８月８日　木曜日　午後３時５２分

uuBluetooth ® HandsFreeLink ®u HFL Menus
404
Features
You can change the ring tone setting.
1.Go to the phone settings screen.
2 Phone settings screen P. 396
2.Select Ring Tone .
3. Select Fixed or Mobile Phone .
If you get into the vehicle while you are on the phone, the call can be automatically
transferred to HFL.
1.Go to the phone settings screen.
2 Phone settings screen P. 396
2.Select Auto Phone Call Transfer .
3. Select On or Off .
■Ring Tone1Ring Tone
Fixed: The fixed ring tone sounds from the speakers.
Mobile Phone: For certain connect ed phones, the
ring tone stored in the phone sounds from the
speakers.
■Automatic Transferring
20 HR-V HDMC HDMG-31T7A6400.book 404 ページ ２０１９年８月８日　木曜日　午後３時５２分

Continued405
uuBluetooth ® HandsFreeLink ®u HFL Menus
Features
■When Automatic Phone Sync is set to
On:
When your phone is paired, the contents of its
phonebook and call history are automatically
imported to the system.
■Changing the Automatic Phone Sync
setting
1. Go to the phone settings screen.
2 Phone settings screen P. 396
2.Select Automatic Phone Sync .
3. Select On or Off .
■Automatic Import of Cellular Phonebook and Call History1Automatic Import of Cellular Phonebook and Call History
When you select a name from the list in the cellular
phonebook, you can see up to three category icons.
The icons indicate what types of numbers are stored
for that name.
On some phones, it may not be possible to import the
category icons to the system.
The phonebook is updated af ter every connection.
Call history is updated after every connection or call.
Pref
Home
Mobile
Work
PagerFax
Car
Other
Voice
20 HR-V HDMC HDMG-31T7A6400.book 405 ページ ２０１９年８月８日　木曜日　午後３時５２分

uuBluetooth ® HandsFreeLink ®u HFL Menus
406
Features
Up to 20 speed dial numbers can be stored per phone.
To store a speed dial number:
1.Go to the phone menu screen.
2 Phone Menu screen P. 398
2.Select Speed Dial .
3. Select New Entry.
4. Select a place to choose a number.
From Import from Call History:
u Select a number from the call history.
From Manual Input :
u Input the number manually.
From Import from Phonebook :
u Select a number from the connected cell
phone’s imported phonebook.
5. When the speed dial is successfully stored,
you are asked to create a voice tag for the
number. Select Yes or No.
6. Select Record to store a voice tag for the
speed dial entry.
u Using the button, follow the prompts
to store a voice tag for the speed dial
entry.
■Speed Dial1 Speed Dial
When a voice tag is stored, press the button to
call the number using the voice tag. Say the voice tag
name.
20 HR-V HDMC HDMG-31T7A6400.book 406 ページ ２０１９年８月８日　木曜日　午後３時５２分

Continued407
uuBluetooth ® HandsFreeLink ®u HFL Menus
Features
■To add a voice tag to a stored speed
dial number
1. Go to the phone menu screen.
2 Phone Menu screen P. 398
2.Select Edit Speed Dial .
3. Select an existing speed dial entry.
u From the pop-up menu, select Edit.
4. Select Voice Tag .
u From the pop-up menu, select Record.
5. Select Record , or use the button,
follow the prompts to complete the voice
tag.
■To delete a voice tag
1. Go to the phone menu screen.
2 Phone Menu screen P. 398
2.Select Edit Speed Dial .
3. Select an existing speed dial entry.
u From the pop-up menu, select Edit.
4. Select Voice Tag .
u From the pop-up menu, select Clear.
5. A confirmation message appears on the
screen. Select Yes.
1Speed Dial
Avoid using duplicate voice tags.
Avoid using “home ” as a voice tag.
It is easier for the system to recognise a longer name.
For example, use “ John Smith” instead of “John.”
20 HR-V HDMC HDMG-31T7A6400.book 407 ページ ２０１９年８月８日　木曜日　午後３時５２分

408
uuBluetooth ® HandsFreeLink ®u HFL Menus
Features
■To edit a speed dial
1. Go to the phone menu screen.
2 Phone Menu screen P. 398
2.Select Edit Speed Dial .
3. Select an existing speed dial entry.
u From the pop-up menu, select Edit.
4. Select a setting you want.
■To delete a speed dial
1. Go to the phone menu screen.
2 Phone Menu screen P. 398
2.Select Edit Speed Dial .
3. Select an existing speed dial entry.
u From the pop-up menu, select Delete.
4. A confirmation message appears on the
screen. Select Yes.
AAAAA
BBBBB
CCCCC
DDDDD
EEEEE
FFFFF
20 HR-V HDMC HDMG-31T7A6400.book 408 ページ ２０１９年８月８日　木曜日　午後３時５２分