display HONDA INSIGHT 2002 1.G Owners Manual

This section gives inf ormation about
the controls and displays that
contribute to the daily operation of
your Honda. All the essential
controls are within easy reach............................
Control Locations .44
...............................
Indicator Lights .45
.............................................
Gauges .50
...............................
Speedometer .50
..............
Display Change Button . 50
.....................................
Odometer .50
.................
Current Fuel Mileage . 53
.................................
Trip Meters .53
................................
Trip Mileage .54
Segment Distance and Fuel ....................................
Mileage .54
................
Lif etime Fuel Mileage . 55
Turning Of f the Mileage ....................................
Displays .55
..................
Battery Level Gauge . 56
................
Charge/Assist Gauge . 57
..................................
Fuel Gauge .58
...................
Temperature Gauge . 58
.................................
Tachometer .58
Maintenance Required ...................................
Indicator .59
Controls Near the Steering .......................................
Wheel .60
...................................
Headlights .61
............
Daytime Running Lights . 62
....
Instrument Panel Brightness . 62................................
Turn Signals .63
.....................
Windshield Wipers .63
..................
Windshield Washers . 64
Rear Window Wiper and .....................................
Washer .65
..........................
Hazard Warning .65
.............
Rear Window Def ogger . 65
...............................
Keys and Locks .67
..............................................
Keys .67
....................
Immobilizer System . 68
............................
Ignition Switch .69
..................................
Door Locks .71
............................................
Hatch .71
...................
Remote Transmitter . 73
............................
Seat Adjustments .76
.............
Front Seat Adjustments . 76
..............................
Power Windows .77
.............................................
Mirrors .78
.................................
Parking Brake .79
.....................................
Storage Box .79
........................................
Glove Box .80
.............................
Beverage Holder .80
...............
Accessory Power Socket . 81
...................................
Interior Light .82
Instruments and Controls
Inst rument s and Cont rols43

The odometer shows the total dis-
tance your car has been driven. It
displays in miles and kilometers.
It is illegal under U.S. f ederal law and
Canadian provincial regulations to
disconnect, reset, or alter the
odometer with the intent to change
the number of miles or kilometers
indicated.
The Display Change button switches
the speedometer reading between
miles per hour and kilometers per
hour. It also changes the odometer
and trip meters to read in miles or
kilometers correspondingly. To
change the readings, push the
Display Change button until the
display changes.
This shows your speed in miles per
hour (mph) or kilometers per hour
(km/h). Odometer
Display Change Button
Speedometer
Gauges
Inst rument s and Cont rols50
S SP PE
EE
ED
D O
OM M E
ET
TE
ER
R
T
T A
A C
CHH O
OM M E
ET
TE
ER
R
T
TR
RI IPP B
BUUT TT
TO
ON N
F
FU
UE EL
L G
GAAU
UG GEE
T
T R
RI IPP M
M E
ET
TE
ER
R/ /O
OD DO
OM M E
ET
TE
ER
R
T
T E
EM
M P
PE
ER
RA A T
TU
UR REE G
GAAU
UG GEE D
D
I
ISSP PL
LAA Y
Y C
CHH A
AN
NG GEE
B
BU UT TT
TO
ON N
M
M
A
AI
INNT TE
EN
NA AN
NC CEE R
REEQ
QU UIIRRE ED
D I
INND DI
ICCA A T
TO
OR R

This display shows the current, or
instantaneous fuel mileage you are
getting.The trip meters show the number of
miles or kilometers driven since you
last reset them.
There are two trip meters: Trip A
and Trip B. Each trip meter works
independently, so you can keep track
of two dif f erent distances. To change
the display to show Trip A, Trip B, or
the odometer, press the Trip button
repeatedly.To reset a trip meter, display it, then
press and hold the Trip button until
the numbers reset to 0.0.
You can turn off this display at any
time. See page . To change the meter reading in the
display, push the display change
button.
(U.S.: miles per hour and mpg,
Canada: kilometer per hour and
l/100 km) 55
CONT INUED
Gauges
Inst rument s and Cont rols
Current Fuel Mileage T rip Meters
53
C CUUR RRREEN
NT T F
FUUE EL
L M
M I
ILLE E A
A G
GE E
T
TR
RI IPP B
BUUT TT
TO
ON N

When you reset a trip meter, the
average fuel mileage for that trip
meter also resets. When a trip meter is displayed, the
average fuel mileage you have been
getting during that trip is shown in
the Fuel Mileage display. This
number is updated once per minute.
This display can be turned of f at any
time. See page .You can use this f unction to display
the distance and average f uel
mileage f or a segment of a trip.
To display the segment distance and
f uel mileage, press and release the
FCD Select button. The Segment
Display indicator will come on to
remind you that this is the segment
distance and fuel mileage display.
To reset the display, press and hold
the FCD Select button until the
display resets to zero and dashes.
The system then begins displaying
the distance and average f uel
mileage f rom that point. The display
is updated once per minute.
To switch between the segment
display and the Trip Meter/
Odometer display, press and release
the FCD Select button.
55
Gauges
Inst rument s and Cont rols
Trip Mileage Segment Distance and Fuel
Mileage
54
T TR
RI IPP M
M I
ILLE E A
A G
GE E (
(T
T R
RI IPP A
A)
) S
SE
EG
GM M E
EN
NT T
D
D I
ISSP PL
LAA Y
Y
I
IN ND DI
ICCA A T
TO
OR R
F
FC CD D S
SEEL
LEE C
CT T B
BUUT TT
TO
ON N

You can temporarily turn off the
Current Fuel Mileage and Fuel
Mileage displays.
To turn them off:
When the odometer is displayed, the
Fuel Mileage display shows the
lif etime f uel mileage. This is the
average f uel mileage your vehicle
has gotten since the last time the
display was reset. To reset this display, turn the
ignition switch to ON (II). If the
engine is running, make sure the
transmission is in neutral and the
parking brake is set. Use the Trip
button to display the odometer. Then
press and hold the Trip button until
the Lif etime Fuel Mileage Display
begins to blink (approximately f ive
seconds). Release the Trip button,
then press it again while the display
is blinking and hold it until the
display clears to dashes.
Turn the ignition switch to ON (II).
If the engine is running, make
sure the transmission is in neutral
andtheparkingbrakeisset.
Use the Trip button to select Trip
A, Trip B, or the odometer.
Press and hold the FCD Select
button f or approximately three
seconds. The Current Fuel
Mileage display will turn of f .
Press and hold the FCD Select
button again. The Fuel Mileage
display f or the meter you are
displaying (Trip A, Trip B, or
odometer) will turn of f .
1.
3.
4. 2.
CONT INUED
Gauges
Inst rument s and Cont rols
T urning Of f the Mileage Displays
Lifetime Fuel Mileage
55

Use the Trip button to select
another mileage display.
Press and hold the FCD Select
button again to turn off that
display.
Use the Trip button to select the
third display.
Press and hold the FCD Select
button again to turn off that
display.
Although the displays are turned off,
the average f uel mileages continue
to be calculated. The displays will
turn back on when you press and
hold the FCD Select button again. This gauge shows you the state of
charge of the battery for the
Integrated Motor Assist (IMA). This
battery is recharged by the engine,
anddischargedbytheIMAwhenit
is assisting the engine with powering
the vehicle.The gauge reading may drop near
the bottom under driving conditions
that require assist f or a long time,
such as prolonged acceleration or
climbing a long hill. The engine will
recharge the battery as you continue
driving.
5.
6.
7.
8.
With 5-speed
With CVT (U.S. only)
Gauges
Inst rument s and Cont rols
Battery Level Gauge
56
B BAA T
TT
TE
ER
RY Y L
LEE V
V E
EL
L G
GAAU
UG GEE

´µ
´µ
´
´
µ
µ
Thedisplaydimswhentheparking
lights or headlights are turned on.
Adjust the brightness to the desired
level with the headlight switch of f ,
and also with the headlight switch on.
Both settings will remain at those
levels until you change them.
With the headlight switch on, you
can switch the display to f ull daytime
brightness by pushing and holding
the button. Push the button to
return the display to the original
brightness.
With the headlight switch off, the
high beam headlights come on with
reduced brightness when you turn
the ignition switch to ON (II) and
release the parking brake. They
remain on until you turn the ignition
of f , even if you set the parking brake.
The headlights revert to normal
operation when you turn them on
with the switch.
The buttons in the lower left corner
of the instrument panel adjust the
brightness of the display in six steps.
Push the or button five times
to see the f ull range.
Canadian models only
Controls Near the Steering Wheel
Instrument Panel Brightness
Daytime Running L ights
Inst rument s and Cont rols62
B BU UT TT
TO
ON N
B
BU UT TT
TO
ON N

When you set the temperature to its
lower limit (60°F/18°C) or its upper
limit (90°F/32°C), the system runs
at f ull cooling or heating only. It does
not regulate the interior temperature.
When the temperature is set
between the lower and upper limits,
the system regulates the interior
temperature to the set value.In cold weather, the fan will not
come on automatically until the car
has been driven f or a short time and
the heater starts to develop warm air.
To put the Automatic Climate
Control in f ully-automatic mode,
press the AUTO button and set the
desired temperature by turning the
temperature control dial. You will
see AUTO in the system’s display.
The light above the button
also shows you which mode,
Recirculation or Fresh Air, is
selected.
When the system is in f ully
automatic mode, the auto idle stop
f unction will not be activated.
The system automatically selects the
proper mix of conditioned and/or
heated air that will, as quickly as
possible, raise or lower the interior
temperature f rom its current level to
the set temperature. Fully-automatic Operation
Climat e Cont rol Syst em
Comf ort and Convenience Feat ures
Auto Button
92
A A
U
UT TO
O B
BUUT TT
TO
ON N
O
OF FFF B
BUUT TT
TO
ON N
M
M
O
ODDE
E B
BUUT TT
TO
ON N
F
FA
A N
N S
SPPE
EE
ED
D B
BUUT TT
TO
ON N
E
EC
CO ON N B
BUUT TT
TO
ON N T
T
E
EM
M P
PE
ER
RA A T
TU
UR REE
C
CO ON NTTR
RO OL L D
DI
IAA L
L

This button controls the source of
the air going into the system. When
the indicator above this button is lit,
air f rom the car’s interior is sent
through the system again (Recircula-
tion mode). When the indicator is off,
air is brought in f rom outside the car
(Fresh Air mode).
You can, f or example, manually put
the system in recirculation mode
when driving through an area of
smoke or f umes.You can manually select the f an
speed with the fan speed button.
Pressing the button repeatedly
makes the fan run faster. The fan
speed is shown by bars in the display.
If the f an is at its highest speed,
pressing the button again takes it to
its lowest speed.
Climat e Cont rol Syst em
Comf ort and Convenience Feat ures
Recirculat ion But t on
Fan Speed But t on
94
M MO
ODDE
E B
BUUT TT
TO
ON N E
E
C
CO ON N B
BUUT TT
TO
ON N
R
RE EC
CI IRRC CUUL LAA T
TI
IOON N B
BUUT TT
TO
ON N
F
FA
A N
N S
SPPE
EE
ED
D B
BUUT TT
TO
ON N T
T
E
EM
M P
PE
ER
RA A T
TU
UR REE
C
CO ON NTTR
RO OL L D
DI
IAA L
L

CONT INUED
Use the MODE button to select the
vents the air flows from. Some air
will f low f rom the dashboard corner
vents in all modes. Each time you
press the MODE button, the display
shows the mode selected. Press the
button four times to see all the
modes.Air f low is divided between
the f loor vents and the def roster
vents at the base of the windshield.
The main air f low is divided
between the dashboard vents and
the f loor vents. Air f lows f rom the f loor
vents.
The main air flow comes
f rom the dashboard vents.
Climat e Cont rol Syst em
Comf ort and Convenience Feat ures
Mode Button
95