clock HONDA INSIGHT 2006 1.G User Guide

HONDA INSIGHT 2006 1.G User Guide INSIGHT 2006 1.G HONDA HONDA https://www.carmanualsonline.info/img/13/5949/w960_5949-0.png HONDA INSIGHT 2006 1.G User Guide

Page 149 of 218

HONDA INSIGHT 2006 1.G User Guide Install the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.To change the bulb on the driver’s
side, start the

Page 150 of 218

HONDA INSIGHT 2006 1.G User Guide Install the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
Put the inner f ender cover in place.
Tighten the s

Page 151 of 218

HONDA INSIGHT 2006 1.G User Guide Determine which bulb, brake/
taillight, back-up light, side marker
light or turn signal is burned out.
Remove the socket f or that bulb
by turning counterclockwise.
Pull the bulb straight out of its
s

Page 170 of 218

HONDA INSIGHT 2006 1.G User Guide CONT INUED
Place the jack under the jacking
point nearest the tire you need to
change. It is pointed to by an
arrow molded into the underside
of the body. Turn the end bracket
clockwise until the top

Page 179 of 218

HONDA INSIGHT 2006 1.G User Guide If you do not f ind an obvious leak,
check the coolant level in the
radiator reserve tank. Add coolant
if the level is below the MIN mark.
If there was no coolant in the
reserve tank, you may need to

Page 211 of 218

HONDA INSIGHT 2006 1.G User Guide Î
................
DANGER, Explanation of . ii
...................................
Dashboard .4, 42
................
Daytime Running Lights . 56
Daytime Running Lights ..............................

Page 216 of 218

HONDA INSIGHT 2006 1.G User Guide Î
CONT INUED
...................................
Seat Belts .10, 18
...............
Additional Information . 18
Automatic Seat Belt ...............................
Tensioners .19
...................
Page:   < prev 1-10 11-20