pairing phone HONDA INSIGHT 2013 2.G Technology Reference Guide

FM Traffic
Press and release the Talk button before you say a command.
Displaying Traffic Information
Say“Display traffic” to view highway flow data.
Note:Traffic flow and incident icons are
only displayed on map scales of \f miles
(8 km) or less.
Heavy traffic
Moderate traffic
Traffic
Flow
data
Traffic
Flow
data Incident
icon
Incident
icon
Incident
Traffic Icons
Construction
Road closed
Weather
Provides continuously updated information, including traffic speed, incidents, and
construction in major metro areas. Works in cities where a clear FM traffic signal
is available.
\f. Say “Display traffic list” to view
a list of incidents on your route.
3. Say “Avoid,” and the incident
list returns.
4. Say “Reroute” to set the new
route.
Traffic ReroutingWhen a destination is already set, you can create a detour to avoid traffic
incidents or congestion.
202\f
2. Say the number of the incident
you want to avoid. When the
incident appears, say “Traffic
detail.”
BLUETOOTH® HANDSFREELINK®( H F L )
Place and receive phone calls through your vehicle’s audio system. Visit
handsfreelink.honda.com to check if your phone is compatible.
To reduce the potential for driver distraction, certain manual and touch
screen functions may be inoperable or grayed out while the vehicle is
moving. Voice commands are always available.
PickUp button: Answer an incoming call, or
go directly to the Phone screen.
Ta l k b u t t o n : Give HFL commands.
Back button: Cancel a command and return
to the previous screen.
HangUp: End a call or decline a call.
How to Use HFL
Press and release the Talk button before you say a command.
1.Press the PickUp button to
go to the Phone screen. A
prompt appears. Say“Yes.”
2. Make sure your phone is in discovery mode, and say“OK.” If your phone does not appear:
Say
“Find Another Phone” and
search for a HandsFreeLink
device from your phone.
Connect to HFL.
3. HFL searches for your phone.
Say the number next to the
phone when it appears on the list. 4. HFL gives you a fourdigit code.
Enter it on your phone when
prompted. The phone is now
paired.
Pairing Your Phone
Use this pairing method when no phone has ever been paired to the system. You
can pair your compatible phone only when the vehicle is stopped.
13 Insight EX NAV TRG_A\ATG_NEW STYLE 8/7/2\A012 1\f44 PM Page \A12

2223
Press and release the Talk button before you say a command.
1.Press the PickUp button to
go to the Phone screen.
If a prompt appears asking to
connect to a phone, say“No”
and go to step 2. 5. Make sure your phone is in
discovery mode, and say“OK.”
6. HFL searches for your phone. Say
the number next to the phone
when it appears on the list.
7. HFL gives you a fourdigit code. Enter it on your phone when
prompted. The phone is now
paired.
If your phone does not appear:
Say
“Find Another Phone” and
search for HandsFreeLink from
your phone. Connectto HFL.
2.Say “Phone setup.”
3.Say “Add a phone.”
4.Say “Search.”
Pairing Your Phone (continued)
Use this pairing method when a phone has already been paired to the system, or
when you want to pair an additional phone.
Press and release the Talk button before you say a command.
1.Press the PickUp button to
go to the Phone screen.
2. Say “Dial.”3.Say the entire phone number,
then say“Dial” to call.
4. The call is connected and heard through the vehicle speakers.
Dialing a Number
Receiving a Call
Press the Hang\bUp button to
end or decline the call.
A notification is heard and the following screen appears:
Enter a \f0\bdigit phone number to call.
Press the Pick\bUp button to
accept the call.
13 Insight EX NAV TRG_A\ATG_NEW STYLE 8/7/2\A012 1\f44 PM Page \A13